[PATCH 04/10] powerpc/mpic: Save computed phys_addr for board-specific code
Kyle Moffett
Kyle.D.Moffett at boeing.com
Wed Nov 30 05:58:31 EST 2011
The MPIC code can already perform an automatic OF address translation
step as part of mpic_alloc(), but several boards need to use that base
address when they perform mpic_assign_isu().
The easiest solution is to save the computed physical address into the
"struct mpic" for later use by the board code.
Signed-off-by: Kyle Moffett <Kyle.D.Moffett at boeing.com>
---
arch/powerpc/include/asm/mpic.h | 3 +++
arch/powerpc/platforms/embedded6xx/holly.c | 15 +++------------
arch/powerpc/platforms/embedded6xx/linkstation.c | 14 ++++----------
arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c | 16 +++-------------
arch/powerpc/platforms/embedded6xx/storcenter.c | 16 +++-------------
arch/powerpc/platforms/pasemi/setup.c | 2 +-
arch/powerpc/sysdev/mpic.c | 11 ++++++-----
7 files changed, 23 insertions(+), 54 deletions(-)
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index e6fae49..ba0b204 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -293,6 +293,9 @@ struct mpic
/* Register access method */
enum mpic_reg_type reg_type;
+ /* The physical base address of the MPIC */
+ phys_addr_t paddr;
+
/* The various ioremap'ed bases */
struct mpic_reg_bank gregs;
struct mpic_reg_bank tmregs;
diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c
index 2e9bcf6..d4fb41e 100644
--- a/arch/powerpc/platforms/embedded6xx/holly.c
+++ b/arch/powerpc/platforms/embedded6xx/holly.c
@@ -148,7 +148,6 @@ static void __init holly_setup_arch(void)
static void __init holly_init_IRQ(void)
{
struct mpic *mpic;
- phys_addr_t mpic_paddr = 0;
struct device_node *tsi_pic;
#ifdef CONFIG_PCI
unsigned int cascade_pci_irq;
@@ -157,20 +156,12 @@ static void __init holly_init_IRQ(void)
#endif
tsi_pic = of_find_node_by_type(NULL, "open-pic");
- if (tsi_pic) {
- unsigned int size;
- const void *prop = of_get_property(tsi_pic, "reg", &size);
- mpic_paddr = of_translate_address(tsi_pic, prop);
- }
-
- if (mpic_paddr == 0) {
+ if (!tsi_pic) {
printk(KERN_ERR "%s: No tsi108 PIC found !\n", __func__);
return;
}
- pr_debug("%s: tsi108 pic phys_addr = 0x%x\n", __func__, (u32) mpic_paddr);
-
- mpic = mpic_alloc(tsi_pic, mpic_paddr,
+ mpic = mpic_alloc(tsi_pic, 0,
MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
24,
@@ -179,7 +170,7 @@ static void __init holly_init_IRQ(void)
BUG_ON(mpic == NULL);
- mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
mpic_init(mpic);
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 244f997..72b3685 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -82,28 +82,22 @@ static void __init linkstation_init_IRQ(void)
{
struct mpic *mpic;
struct device_node *dnp;
- const u32 *prop;
- int size;
- phys_addr_t paddr;
dnp = of_find_node_by_type(NULL, "open-pic");
if (dnp == NULL)
return;
- prop = of_get_property(dnp, "reg", &size);
- paddr = (phys_addr_t)of_translate_address(dnp, prop);
-
- mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC ");
+ mpic = mpic_alloc(dnp, 0, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC ");
BUG_ON(mpic == NULL);
/* PCI IRQs */
- mpic_assign_isu(mpic, 0, paddr + 0x10200);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200);
/* I2C */
- mpic_assign_isu(mpic, 1, paddr + 0x11000);
+ mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000);
/* ttyS0, ttyS1 */
- mpic_assign_isu(mpic, 2, paddr + 0x11100);
+ mpic_assign_isu(mpic, 2, mpic->paddr + 0x11100);
mpic_init(mpic);
}
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index f8f33e1..c8ce204 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -102,7 +102,6 @@ static void __init mpc7448_hpc2_setup_arch(void)
static void __init mpc7448_hpc2_init_IRQ(void)
{
struct mpic *mpic;
- phys_addr_t mpic_paddr = 0;
struct device_node *tsi_pic;
#ifdef CONFIG_PCI
unsigned int cascade_pci_irq;
@@ -111,21 +110,12 @@ static void __init mpc7448_hpc2_init_IRQ(void)
#endif
tsi_pic = of_find_node_by_type(NULL, "open-pic");
- if (tsi_pic) {
- unsigned int size;
- const void *prop = of_get_property(tsi_pic, "reg", &size);
- mpic_paddr = of_translate_address(tsi_pic, prop);
- }
-
- if (mpic_paddr == 0) {
+ if (!tsi_pic) {
printk("%s: No tsi108 PIC found !\n", __func__);
return;
}
- DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__,
- (u32) mpic_paddr);
-
- mpic = mpic_alloc(tsi_pic, mpic_paddr,
+ mpic = mpic_alloc(tsi_pic, 0,
MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
24,
@@ -134,7 +124,7 @@ static void __init mpc7448_hpc2_init_IRQ(void)
BUG_ON(mpic == NULL);
- mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
mpic_init(mpic);
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index f1eebca..084f0fc 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -84,22 +84,12 @@ static void __init storcenter_init_IRQ(void)
{
struct mpic *mpic;
struct device_node *dnp;
- const void *prop;
- int size;
- phys_addr_t paddr;
dnp = of_find_node_by_type(NULL, "open-pic");
if (dnp == NULL)
return;
- prop = of_get_property(dnp, "reg", &size);
- if (prop == NULL) {
- of_node_put(dnp);
- return;
- }
-
- paddr = (phys_addr_t)of_translate_address(dnp, prop);
- mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET,
+ mpic = mpic_alloc(dnp, 0, MPIC_PRIMARY | MPIC_WANTS_RESET,
16, 32, " OpenPIC ");
of_node_put(dnp);
@@ -110,8 +100,8 @@ static void __init storcenter_init_IRQ(void)
* 16 Serial Interrupts followed by 16 Internal Interrupts.
* I2C is the second internal, so it is at 17, 0x11020.
*/
- mpic_assign_isu(mpic, 0, paddr + 0x10200);
- mpic_assign_isu(mpic, 1, paddr + 0x11000);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200);
+ mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000);
mpic_init(mpic);
}
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 6f35582..baf20a9 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -234,7 +234,7 @@ static __init void pas_init_IRQ(void)
mpic_flags, 0, 0, "PASEMI-OPIC");
BUG_ON(!mpic);
- mpic_assign_isu(mpic, 0, openpic_addr + 0x10000);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000);
mpic_init(mpic);
/* The NMI/MCK source needs to be prio 15 */
if (nmiprop) {
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index cdfa8df..b80fbe0 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1164,6 +1164,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
return NULL;
mpic->name = name;
+ mpic->paddr = phys_addr;
mpic->hc_irq = mpic_irq_chip;
mpic->hc_irq.name = name;
@@ -1250,8 +1251,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
#endif
/* Map the global registers */
- mpic_map(mpic, node, phys_addr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
- mpic_map(mpic, node, phys_addr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+ mpic_map(mpic, node, mpic->paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
+ mpic_map(mpic, node, mpic->paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
/* Reset */
@@ -1306,7 +1307,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
for_each_possible_cpu(i) {
unsigned int cpu = get_hard_smp_processor_id(i);
- mpic_map(mpic, node, phys_addr, &mpic->cpuregs[cpu],
+ mpic_map(mpic, node, mpic->paddr, &mpic->cpuregs[cpu],
MPIC_INFO(CPU_BASE) + cpu * MPIC_INFO(CPU_STRIDE),
0x1000);
}
@@ -1314,7 +1315,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
/* Initialize main ISU if none provided */
if (mpic->isu_size == 0) {
mpic->isu_size = mpic->num_sources;
- mpic_map(mpic, node, phys_addr, &mpic->isus[0],
+ mpic_map(mpic, node, mpic->paddr, &mpic->isus[0],
MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
}
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
@@ -1346,7 +1347,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
}
printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %llx,"
" max %d CPUs\n",
- name, vers, (unsigned long long)phys_addr, num_possible_cpus());
+ name, vers, (unsigned long long)mpic->paddr, num_possible_cpus());
printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n",
mpic->isu_size, mpic->isu_shift, mpic->isu_mask);
--
1.7.2.5
More information about the Linuxppc-dev
mailing list