[PATCH 3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip

[LiuShuo]

于 2011年11月24日 16:16, Artem Bityutskiy 写道:
> On Thu, 2011-11-24 at 07:49 +0000, Li Yang-R58472 wrote:
>>> Subject: Re: [PATCH 3/3] mtd/nand : workaround for Freescale FCM to support
>>> large-page Nand chip
>>>
>>> On Thu, 2011-11-24 at 08:41 +0800, b35362 at freescale.com wrote:
>>>> +               /*
>>>> +                * Freescale FCM controller has a 2K size limitation of buffer
>>>> +                * RAM, so elbc_fcm_ctrl->buffer have to be used if writesize
>>>> +                * of chip is greater than 2048.
>>>> +                * We malloc a large enough buffer (maximum page size is
>>> 16K).
>>>> +                */
>>>> +               elbc_fcm_ctrl->buffer = kmalloc(1024 * 16 + 1024,
>>> GFP_KERNEL);
>>>
>>> Are there NANDs with 16KiB page size?
>> We are not sure, but are there possibility that chip with 16K page will appear?  Or maybe we can add a MACRO for the maximum page size?
> I do not know, but I know that allocating 32KiB of contiguous physical
> RAM may cause unneeded memory pressure and even fail if the memory is
> too fragmented. So I would not go for this unless this is necessary.
What is your suggestion ? 8k is enough ?
> Did you try to look how the NAND base interface could be changed to
> avoid re-allocation altogether, BTW?
This buffer is a controller-wide resource( as Scott said), I only 
allocate buffer one time in this version.
It should be a large enough buffer for all chips.

-Liu Shuo