[PATCH 2/3] mtd/nand : set Nand flash page address to FBAR and FPAR correctly

[Artem Bityutskiy]

On Fri, 2011-11-18 at 10:08 +0800, LiuShuo wrote:
> Ok and I want to add another patch before 3/3.
> 
> -LiuShuo
> > On Tue, 2011-11-15 at 17:29 +0800, b35362 at freescale.com wrote:
> >> From: Liu Shuo<b35362 at freescale.com>
> >>
> >> If we use the Nand flash chip whose number of pages in a block is greater
> >> than 64(for large page), we must treat the low bit of FBAR as being the
> >> high bit of the page address due to the limitation of FCM, it simply uses
> >> the low 6-bits (for large page) of the combined block/page address as the
> >> FPAR component, rather than considering the actual block size.
> > Looks like this patch depends on the previous white-space clean-up patch
> > - could you please refactor it (and 3/3 too) and resend?
> Ok and I am going to add another new patch before 3/3.

Sure, send 3/3 as well because this one depends on the cleanup patch, so
cannot be applied independently.

Artem.