[PATCH 1/2] Unify pci/pcie initialization code

Jia Hongtao-B38951 B38951 at freescale.com
Tue Nov 22 17:20:34 EST 2011


Hi Kumar,
We want more comments on this series of patches ([1/2] & [2/2]) to speed up the pushing-to-kernel progress.
Thanks.

-----Original Message-----
From: Jia Hongtao-B38951 
Sent: Monday, October 31, 2011 1:55 PM
To: linuxppc-dev at lists.ozlabs.org
Cc: Li Yang-R58472; Gala Kumar-B11780; Jia Hongtao-B38951
Subject: [PATCH 1/2] Unify pci/pcie initialization code

In previous version pci/pcie initialization is in platform code which Initialize PCI bridge base on EP/RC or host/agent settings.
We unified pci/pcie initialization as common APIs named fsl_pci_setup which can be called by platform code.

Signed-off-by: Jia Hongtao <B38951 at freescale.com>
Signed-off-by: Li Yang <leoli at freescale.com>
---
 arch/powerpc/platforms/85xx/mpc85xx_ds.c |   30 ++-----------------
 arch/powerpc/sysdev/fsl_pci.c            |   48 ++++++++++++++++++++++++++++++
 arch/powerpc/sysdev/fsl_pci.h            |    5 +++
 3 files changed, 56 insertions(+), 27 deletions(-)

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 10e7db0..7188c0b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -157,33 +157,12 @@ extern void __init mpc85xx_smp_init(void);  #endif  static void __init mpc85xx_ds_setup_arch(void)  { -#ifdef CONFIG_PCI
-	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
-		    of_device_is_compatible(np, "fsl,p2020-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == primary_phb_addr)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
-		}
-	}
+	fsl_pci_setup(primary_phb_addr);
 
+#ifdef CONFIG_PCI
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;  #endif
 
@@ -192,11 +171,8 @@ static void __init mpc85xx_ds_setup_arch(void)  #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (memblock_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > 0xffffffff)
 		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
 #endif
 
 	printk("MPC85xx DS board from Freescale Semiconductor\n"); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 80b8b7a..4d4536f 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -402,6 +402,54 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)  }  #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
 
+static struct of_device_id pci_ids[] = {
+	{ .compatible = "fsl,mpc8540-pci", },
+	{ .compatible = "fsl,mpc8548-pcie", },
+	{},
+};
+
+/**
+ * fsl_pci_setup - Initialization for PCI
+ * @primary_phb_addr: primary bus address
+ *
+ * Add bridge if pci controller is a host  */ void fsl_pci_setup(int 
+primary_phb_addr) {
+	struct device_node *np;
+	struct pci_controller *hose;
+	dma_addr_t min_dma_addr = 0xffffffff;
+
+	for_each_node_by_type(np, "pci") {
+		if (of_match_node(pci_ids, np)) {
+			struct resource rsrc;
+			of_address_to_resource(np, 0, &rsrc);
+			if ((rsrc.start & 0xfffff) == primary_phb_addr)
+				fsl_add_bridge(np, 1);
+			else
+				fsl_add_bridge(np, 0);
+
+			hose = pci_find_hose_for_OF_device(np);
+			min_dma_addr = min(min_dma_addr,
+					hose->dma_window_base_cur
+					+ hose->dma_window_size);
+
+		}
+	}
+
+#ifdef CONFIG_SWIOTLB
+	/*
+	 * if we couldn't map all of DRAM via the dma windows we need SWIOTLB
+	 * to handle buffers located outside of dma capable memory region
+	 */
+	if (memblock_end_of_DRAM() > min_dma_addr) {
+		ppc_swiotlb_enable = 1;
+		set_pci_dma_ops(&swiotlb_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	}
+#endif
+}
+
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, quirk_fsl_pcie_header);
 
 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h index a39ed5c..775ea21 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -89,6 +89,11 @@ struct ccsr_pci {
 };
 
 extern int fsl_add_bridge(struct device_node *dev, int is_primary);
+#ifndef CONFIG_PCI
+#define fsl_pci_setup(p)
+#else
+extern void fsl_pci_setup(int primary_phb_addr); #endif
 extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);  extern int mpc83xx_add_bridge(struct device_node *dev);
 u64 fsl_pci_immrbar_base(struct pci_controller *hose);
--
1.7.5.1




More information about the Linuxppc-dev mailing list