[PATCH] USB: fsl_udc_core: Use (&) instead of (==) to compare ISO XFER

[Peter Chen]

Some ISO gadgets, like audio, has SYNC attribute as well as
USB_ENDPOINT_XFER_ISOC for their bmAttributes at ISO endpoint
descriptor. So, it needs to use & instead of == to judge if
it is ISO XFER.

Signed-off-by: Peter Chen <peter.chen at freescale.com>
---
 drivers/usb/gadget/fsl_udc_core.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index d786ba3..bf40de3 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -877,7 +877,7 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 		VDBG("%s, bad ep", __func__);
 		return -EINVAL;
 	}
-	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+	if (ep->desc->bmAttributes & USB_ENDPOINT_XFER_ISOC) {
 		if (req->req.length > ep->ep.maxpacket)
 			return -EMSGSIZE;
 	}
@@ -1032,7 +1032,7 @@ static int fsl_ep_set_halt(struct usb_ep *_ep, int value)
 		goto out;
 	}
 
-	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+	if (ep->desc->bmAttributes & USB_ENDPOINT_XFER_ISOC) {
 		status = -EOPNOTSUPP;
 		goto out;
 	}
-- 
1.6.3.3