[PATCH][v2] powerpc/p1023: set IRQ[4:6, 11] to active-high level sensitive for PCIe

[Kumar Gala]

On Nov 16, 2011, at 11:09 PM, Kumar Gala wrote:

> From: Roy Zang <tie-fei.zang at freescale.com>
> 
> P1023 external IRQ[4:6, 11] are not pin out, but the interrupts are
> utilized by the PCIe controllers.  As they are not exposed as pins we
> need to set them as active-high (internal to the SoC these interrupts
> are pulled down).
> 
> IRQs[0:3,7:10] are pulled up on the board so we have them set as
> active-low.
> 
> Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
> Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
> ---
> v2:
> * cleaned up commit message & added comments to be clear about IRQ usage

applied to merge

- k