[PATCH 20/29] powerpc/85xx: Rework P1021MDS device tree
Kumar Gala
galak at kernel.crashing.org
Thu Nov 17 18:16:12 EST 2011
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.
Other changes include:
* Moved to specifying interrupt-parent for mpic at root
* Moved to 4-cell mpic interrupt cells to support MPIC timers
* Reworked PCIe nodes to allow supportin IRQs for controller (errors) and
moved PCI device IRQs down to virtual bridge level
* Renamed SDHC node from 'sdhci' to 'sdhc'
* Added usb node for 2nd usb controller
* Dropping "fsl,p1021-IP..." from compatibles for standard blocks
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1021si-post.dtsi | 225 ++++++++++++++
arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi | 68 +++++
arch/powerpc/boot/dts/p1021mds.dts | 421 ++-------------------------
3 files changed, 314 insertions(+), 400 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
new file mode 100644
index 0000000..38ba54d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
@@ -0,0 +1,225 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie at 0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie at 0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1021-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law at 0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm at 1000 {
+ compatible = "fsl,p1021-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller at 2000 {
+ compatible = "fsl,p1021-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi at 7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller at 20000 {
+ compatible = "fsl,p1021-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet at b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet at b1000 {
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: enet2_grp2: ethernet at b2000 {
+ };
+
+ global-utilities at e0000 {
+ compatible = "fsl,p1021-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
+
+&qe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: interrupt-controller at 80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
+ };
+
+ ucc at 2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ mdio at 2120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2120 0x18>;
+ compatible = "fsl,ucc-mdio";
+ };
+
+ ucc at 2400 {
+ cell-index = <5>;
+ reg = <0x2400 0x200>;
+ interrupts = <40>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram at 10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x6000>;
+
+ data-only at 0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x6000>;
+ };
+ };
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
new file mode 100644
index 0000000..4abd54b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1021";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1021 at 0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1021 at 1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
index ad5b852..b1bef1f 100644
--- a/arch/powerpc/boot/dts/p1021mds.dts
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -9,53 +9,22 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1021";
compatible = "fsl,P1021MDS";
- #address-cells = <2>;
- #size-cells = <2>;
aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
ethernet3 = &enet3;
ethernet4 = &enet4;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1021 at 0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1021 at 1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
};
memory {
device_type = "memory";
};
- localbus at ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ lbc: localbus at ffe05000 {
+ reg = <0x0 0xffe05000 0x0 0x1000>;
/* NAND Flash, BCSR, PMC0/1*/
ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
@@ -138,99 +107,26 @@
};
};
- soc at ffe00000 {
-
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
+ soc: soc at ffe00000 {
compatible = "fsl,p1021-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law at 0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm at 1000 {
- compatible = "fsl,p1021-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller at 2000 {
- compatible = "fsl,p1021-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
i2c at 3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
rtc at 68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
- i2c at 3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial at 4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial at 4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
spi at 7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- espi,num-ss-bits = <4>;
- mode = "cpu";
-
- fsl_m25p80 at 0 {
+
+ flash at 0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
+
partition at u-boot {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
@@ -253,237 +149,45 @@
};
};
- gpio: gpio-controller at f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller at 20000 {
- compatible = "fsl,p1021-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma at 21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel at 0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel at 80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel at 100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel at 180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
usb at 22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
phy_type = "ulpi";
};
- mdio at 24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
-
+ mdio at 24000 {
phy0: ethernet-phy at 0 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy at 1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x1>;
};
phy4: ethernet-phy at 4 {
- interrupt-parent = <&mpic>;
reg = <0x4>;
};
};
mdio at 25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
tbi0: tbi-phy at 11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
- enet0: ethernet at B0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet at b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
- queue-group at 0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB0000 0x1000>;
- interrupts = <29 2 30 2 34 2>;
- };
- queue-group at 1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB4000 0x1000>;
- interrupts = <17 2 18 2 24 2>;
- };
};
- enet1: ethernet at B1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet at b1000 {
phy-handle = <&phy4>;
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
- queue-group at 0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB1000 0x1000>;
- interrupts = <35 2 36 2 40 2>;
- };
- queue-group at 1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB5000 0x1000>;
- interrupts = <51 2 52 2 67 2>;
- };
};
- enet2: ethernet at B2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet at b2000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
- queue-group at 0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB2000 0x1000>;
- interrupts = <31 2 32 2 33 2>;
- };
- queue-group at 1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB6000 0x1000>;
- interrupts = <25 2 26 2 27 2>;
- };
- };
-
- sdhci at 2e000 {
- compatible = "fsl,p1021-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto at 30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1",
- "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- mpic: pic at 40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi at 41600 {
- compatible = "fsl,p1021-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities at e0000 { //global utilities block
- compatible = "fsl,p1021-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
};
par_io at e0100 {
@@ -499,8 +203,7 @@
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
- 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9
-*/
+ 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
@@ -535,31 +238,10 @@
};
pci0: pcie at ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie at 0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -571,31 +253,10 @@
};
pci1: pcie at ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie at 0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -606,36 +267,16 @@
};
};
- qe at ffe80000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "qe";
- compatible = "fsl,qe";
+ qe: qe at ffe80000 {
ranges = <0x0 0x0 0xffe80000 0x40000>;
reg = <0 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
- fsl,qe-num-riscs = <1>;
- fsl,qe-num-snums = <28>;
status = "disabled"; /* no firmware loaded */
- qeic: interrupt-controller at 80 {
- interrupt-controller;
- compatible = "fsl,qe-ic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x80 0x80>;
- interrupts = <63 2 60 2>; //high:47 low:44
- interrupt-parent = <&mpic>;
- };
-
enet3: ucc at 2000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <1>;
- reg = <0x2000 0x200>;
- interrupts = <32>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "clk12";
tx-clock-name = "clk9";
@@ -645,20 +286,15 @@
};
mdio at 2120 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x2120 0x18>;
- compatible = "fsl,ucc-mdio";
-
qe_phy0: ethernet-phy at 0 {
interrupt-parent = <&mpic>;
- interrupts = <4 1>;
+ interrupts = <4 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy at 03 {
interrupt-parent = <&mpic>;
- interrupts = <5 1>;
+ interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
@@ -671,10 +307,6 @@
enet4: ucc at 2400 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <5>;
- reg = <0x2400 0x200>;
- interrupts = <40>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk13";
@@ -682,18 +314,7 @@
phy-handle = <&qe_phy1>;
phy-connection-type = "rmii";
};
-
- muram at 10000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0x0 0x10000 0x6000>;
-
- data-only at 0 {
- compatible = "fsl,qe-muram-data",
- "fsl,cpm-muram-data";
- reg = <0x0 0x6000>;
- };
- };
};
};
+
+/include/ "fsl/p1021si-post.dtsi"
--
1.7.3.4
More information about the Linuxppc-dev
mailing list