[PATCH 10/29] powerpc/85xx: Rework MPC8548CDS device trees
Kumar Gala
galak at kernel.crashing.org
Thu Nov 17 18:16:02 EST 2011
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.
Other changes include:
* Moved to a standard 2 #address-cells & #size-cells at top-level
* Moved to specifying interrupt-parent for mpic at root
* Moved to 4-cell mpic interrupt cells to support MPIC timers
* Moved mdio nodes up one level instead of under tsec nodes
* Reworked PCIe nodes to allow supportin IRQs for controller (errors)
and moved PCI device IRQs down to virtual bridge level
* Removed CPU properties setup by u-boot to match other .dts
* Added localbus node, but no chipselect details at this point
* Added MPIC / PCIe msi node
* Dropping "fsl,mpc8548-IP..." from compatibles for standard blocks
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi | 143 +++++++
arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi | 62 +++
arch/powerpc/boot/dts/mpc8548cds.dts | 505 ++++++-------------------
3 files changed, 327 insertions(+), 383 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
new file mode 100644
index 0000000..9d8023a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
@@ -0,0 +1,143 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <25 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie at 0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8548-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law at 0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm at 1000 {
+ compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller at 2000 {
+ compatible = "fsl,mpc8548-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+ L2: l2-cache-controller at 20000 {
+ compatible = "fsl,mpc8548-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+ global-utilities at e0000 {
+ compatible = "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
new file mode 100644
index 0000000..289f121
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
@@ -0,0 +1,62 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8548";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8548 at 0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index a17a557..07b8dae 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -9,13 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
- #address-cells = <1>;
- #size-cells = <1>;
aliases {
ethernet0 = &enet0;
@@ -29,76 +27,19 @@
pci2 = &pci2;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8548 at 0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
- bus-frequency = <0>; // 166 MHz
- clock-frequency = <0>; // 825 MHz, from uboot
- next-level-cache = <&L2>;
- };
- };
-
memory {
device_type = "memory";
- reg = <0x0 0x8000000>; // 128M at 0x0
+ reg = <0 0 0x0 0x8000000>; // 128M at 0x0
};
- soc8548 at e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>;
-
- ecm-law at 0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm at 1000 {
- compatible = "fsl,mpc8548-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller at 2000 {
- compatible = "fsl,mpc8548-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
+ lbc: localbus at e0005000 {
+ reg = <0 0xe0005000 0 0x1000>;
+ };
- L2: l2-cache-controller at 20000 {
- compatible = "fsl,mpc8548-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
+ soc: soc8548 at e0000000 {
+ ranges = <0 0x0 0xe0000000 0x100000>;
i2c at 3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
eeprom at 50 {
compatible = "atmel,24c64";
reg = <0x50>;
@@ -116,351 +57,178 @@
};
i2c at 3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
eeprom at 50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
- dma at 21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel at 0 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel at 80 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel at 100 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel at 180 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
enet0: ethernet at 24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+ };
- mdio at 520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy at 0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy at 1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy at 2 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy at 3 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy at 11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio at 24520 {
+ phy0: ethernet-phy at 0 {
+ interrupts = <5 1 0 0>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy at 1 {
+ interrupts = <5 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy at 2 {
+ interrupts = <5 1 0 0>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy at 3 {
+ interrupts = <5 1 0 0>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy at 11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet at 25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+ };
- mdio at 520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy at 11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio at 25520 {
+ tbi1: tbi-phy at 11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet2: ethernet at 26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
+ };
- mdio at 520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy at 11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio at 26520 {
+ tbi2: tbi-phy at 11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet3: ethernet at 27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
-
- mdio at 520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy at 11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial at 4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial at 4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
};
- global-utilities at e0000 { //global utilities reg
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto at 30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- };
-
- mpic: pic at 40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
+ mdio at 27520 {
+ tbi3: tbi-phy at 11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
};
pci0: pci at e0008000 {
+ reg = <0 0xe0008000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x5 (PCIX Slot 3) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
- 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
- 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
- 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+ 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+ 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+ 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x6 (PCIX Slot 4) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x8 (PCIX Slot 5) */
- 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0xC (Tsi310 bridge) */
- 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x14 (Slot 2) */
- 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x15 (Slot 3) */
- 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
- 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
- 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
- 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+ 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+ 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+ 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x16 (Slot 4) */
- 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x18 (Slot 5) */
- 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
- 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- bus-range = <0 0>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
+ 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
pci_bridge at 1c {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x04 (VIA chip) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x05 (8139) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
/* IDSEL 0x06 (Slot 6) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDESL 0x07 (Slot 7) */
- 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
- 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
+ 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
+ 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
reg = <0xe000 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
@@ -492,7 +260,7 @@
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
- interrupts = <0 1>;
+ interrupts = <0 1 0 0>;
interrupt-parent = <&mpic>;
};
@@ -505,56 +273,25 @@
};
pci1: pci at e0009000 {
+ reg = <0 0xe0009000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
- 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
- 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- bus-range = <0 0>;
- ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0009000 0x1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+ 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
};
pci2: pcie at e000a000 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x0 (PEX) */
- 00000 0x0 0x0 0x1 &mpic 0x0 0x1
- 00000 0x0 0x0 0x2 &mpic 0x1 0x1
- 00000 0x0 0x0 0x3 &mpic 0x2 0x1
- 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
- clock-frequency = <33333333>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
+ reg = <0 0xe000a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
pcie at 0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -565,3 +302,5 @@
};
};
};
+
+/include/ "fsl/mpc8548si-post.dtsi"
--
1.7.3.4
More information about the Linuxppc-dev
mailing list