[PATCH 5/5, v3] powerpc/fsl: Document rapidio node binding-information

[Kumar Gala]

On Nov 16, 2011, at 7:49 AM, Bounine, Alexandre wrote:

>> -----Original Message-----
>> From: Liu Gang [mailto:Gang.Liu at freescale.com]
>> Sent: Saturday, November 12, 2011 7:03 AM
>> To: linuxppc-dev at lists.ozlabs.org; Bounine, Alexandre
>> Cc: akpm at linux-foundation.org; linux-kernel at vger.kernel.org;
>> r58472 at freescale.com; B11780 at freescale.com; r61911 at freescale.com; Liu
>> Gang; Li Yang; Jin Qing; Kumar Gala
>> Subject: [PATCH 5/5,v3] powerpc/fsl: Document rapidio node binding-
>> information
>> 
>> This document is created for powerpc rapidio and rmu nodes in dts
> file.
>> These nodes can support two rapidio ports and message units. In
>> addition,
>> It explicates the properties and gives examples about rapidio and rmu
>> nodes.
>> 
>> Signed-off-by: Li Yang <leoli at freescale.com>
>> Signed-off-by: Jin Qing <b24347 at freescale.com>
>> Signed-off-by: Liu Gang <Gang.Liu at freescale.com>
>> Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
>> ---
>> .../devicetree/bindings/powerpc/fsl/srio-rmu.txt   |  163
>> ++++++++++++++++++++
>> .../devicetree/bindings/powerpc/fsl/srio.txt       |  103
> ++++++++++++
>> 2 files changed, 266 insertions(+), 0 deletions(-)
>> create mode 100644
> Documentation/devicetree/bindings/powerpc/fsl/srio-
>> rmu.txt
>> create mode 100644
>> Documentation/devicetree/bindings/powerpc/fsl/srio.txt
>> 
> 
> Acked-by: Alexandre Bounine <alexandre.bounine at idt.com>

applied to 'next'

- k