[PATCH] net: fsl_pq_mdio: fix non tbi phy access

[Baruch Siach]

Hi Andy,

On Mon, Nov 14, 2011 at 09:04:47PM +0000, Fleming Andy-AFLEMING wrote:
> Well, this got applied quickly, so I guess I can't NAK, but this requires discussion.
> 
> On Nov 14, 2011, at 0:22, "Baruch Siach" <baruch at tkos.co.il> wrote:
> 
> > Since 952c5ca1 (fsl_pq_mdio: Clean up tbi address configuration) .probe returns
> > -EBUSY when the "tbi-phy" node is missing. Fix this.
> 
> It returns an error because it finds no tbi node. Because without the tbi 
> node, there is no way for the driver to determine which address to set.
> 
> Your solution is to ignore the error, and hope. That's a broken approach.  
> The real solution for a p1010 should be to have a tbi node in the dts.

Can you elaborate a bit on why this approach is broken? The PHY used to work 
for me until 952c5ca1, and with this applied.

> And looking at the p1010si.dtsi, I see that it's automatically there for 
> you.
> 
> How were you breaking?

Adding linuxppc to Cc.

My board is P1011 based, the single core version of P1020, not P1010. In 
p1020si.dtsi I see no tbi node. In p1020rdb.dts I see a tbi node but only for 
mdio at 25000, not mdio at 24000, which is what I'm using.

Am I missing something?

baruch

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -