[PATCH] powerpc/p1023: set IRQ[4:6, 11] to high level sensitive for PCIe

[Roy Zang]

P1023 external IRQ[4:6, 11] do not pin out, but the interrupts are
shared with PCIe controller.
The silicon internally ties the interrupts to L, so change the
IRQ[4:6,11] to high level sensitive for PCIe.

Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
---
 arch/powerpc/boot/dts/p1023rds.dts |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts
index d9b7767..66bf804 100644
--- a/arch/powerpc/boot/dts/p1023rds.dts
+++ b/arch/powerpc/boot/dts/p1023rds.dts
@@ -490,9 +490,9 @@
 			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map = <
 				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 4 1
-				0000 0 0 2 &mpic 5 1
-				0000 0 0 3 &mpic 6 1
+				0000 0 0 1 &mpic 4 2
+				0000 0 0 2 &mpic 5 2
+				0000 0 0 3 &mpic 6 2
 				0000 0 0 4 &mpic 7 1
 				>;
 			ranges = <0x2000000 0x0 0xa0000000
@@ -532,7 +532,7 @@
 				0000 0 0 1 &mpic 8 1
 				0000 0 0 2 &mpic 9 1
 				0000 0 0 3 &mpic 10 1
-				0000 0 0 4 &mpic 11 1
+				0000 0 0 4 &mpic 11 2
 				>;
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000
-- 
1.6.0.6