[PATCH 2/2][v3] rapidio, powerpc/85xx: Error interrupt handler for sRIO.

[Kumar Gala]

Any reason for me not to apply this and send it upstream for now?

- k

On May 20, 2011, at 7:14 AM, Bounine, Alexandre wrote:

> Kumar,
> 
> Are you planning to release support for dual-port SRIO controller?
> If yes, it may be just merged into it (unless dual-port implementation
> already has it).
> 
> Alex.
> 
>> -----Original Message-----
>> From: linuxppc-dev-bounces+alexandre.bounine=idt.com at lists.ozlabs.org
>> [mailto:linuxppc-dev-
>> bounces+alexandre.bounine=idt.com at lists.ozlabs.org] On Behalf Of Kumar
>> Gala
>> Sent: Friday, May 20, 2011 12:29 AM
>> To: Bounine, Alexandre
>> Cc: Li Yang-R58472; Xie Shaohui-B21989; Zang Roy-R61911; akpm at linux-
>> foundation.org; linuxppc-dev at lists.ozlabs.org; Gala Kumar-B11780
>> Subject: Re: [PATCH 2/2][v3] rapidio,powerpc/85xx: Error interrupt
>> handler for sRIO.
>> 
>> Alex,
>> 
>> What are we doing with this patch?
>> 
>> - k
>> 
>> On Dec 3, 2010, at 12:04 PM, Bounine, Alexandre wrote:
>> 
>>> I think they should follow the previous two that are in Kumar's
> tree.
>>> Probably Kumar may give you a better timeline estimate for this.
>>> 
>>> Alex.
>>> 
>>> From:
> linuxppc-dev-bounces+alexandre.bounine=idt.com at lists.ozlabs.org
>> [mailto:linuxppc-dev-
>> bounces+alexandre.bounine=idt.com at lists.ozlabs.org] On Behalf Of Xie
>> Shaohui-B21989
>>> Sent: Thursday, December 02, 2010 10:29 PM
>>> To: Bounine, Alexandre; linuxppc-dev at lists.ozlabs.org
>>> Cc: akpm at linux-foundation.org; Gala Kumar-B11780; Li Yang-R58472;
>> Zang Roy-R61911
>>> Subject: RE: [PATCH 2/2][v3] rapidio,powerpc/85xx: Error interrupt
>> handler for sRIO.
>>> 
>>> Hi Alex,
>>> 
>>> May I ask when would these patches be applied to mainline?
>>> 
>>> 
>>> Best Regards,
>>> Shaohui Xie
>>> 
>>> From: Bounine, Alexandre [mailto:Alexandre.Bounine at idt.com]
>>> Sent: Wednesday, December 01, 2010 4:49 AM
>>> To: Xie Shaohui-B21989; linuxppc-dev at lists.ozlabs.org
>>> Cc: akpm at linux-foundation.org; Li Yang-R58472; Gala Kumar-B11780;
>> Zang Roy-R61911
>>> Subject: RE: [PATCH 2/2][v3] rapidio, powerpc/85xx: Error interrupt
>> handler for sRIO.
>>> 
>>> Applies correctly now. Lab tested on 8548/RIO setup.
>>> 
>>> Alex.
>>> 
>>>> -----Original Message-----
>>>> From: Shaohui Xie [mailto:b21989 at freescale.com]
>>>> Sent: Thursday, November 18, 2010 1:58 AM
>>>> To: linuxppc-dev at lists.ozlabs.org
>>>> Cc: akpm at linux-foundation.org; Shaohui Xie; Li Yang; Kumar Gala;
> Roy
>>> Zang; Bounine, Alexandre
>>>> Subject: [PATCH 2/2][v3] rapidio, powerpc/85xx: Error interrupt
>>> handler for sRIO.
>>>> 
>>>> The sRIO controller reports errors to the core with one signal, it
>>> uses
>>>> register EPWISR to provides the core quick access to where the
> error
>>> occurred.
>>>> The EPWISR indicates that there are 4 interrupts sources, port1,
>>> port2, message
>>>> unit and port write receive, but the sRIO driver does not support
>>> port2
>>>> for now, still the handler takes care of port2.
>>>> Currently the handler only clear error status without any recovery.
>>> 
>>> _______________________________________________
>>> Linuxppc-dev mailing list
>>> Linuxppc-dev at lists.ozlabs.org
>>> https://lists.ozlabs.org/listinfo/linuxppc-dev
>> 
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev at lists.ozlabs.org
>> https://lists.ozlabs.org/listinfo/linuxppc-dev