[PATCH] powerpc/qoriq: Add default mode for P1020RDB USB

[Ramneek Mehresh]

Add P1020 USB controller default value for "dr_mode" property

Signed-off-by: Ramneek Mehresh <ramneek.mehresh at freescale.com>
---
Applies on git://git.am.freescale.net/mirrors/linux-2.6.git
(branch master)
 arch/powerpc/boot/dts/p1020rdb.dts |   10 ++++------
 1 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index e0668f8..c630b51 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -473,13 +473,11 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <28 0x2>;
 			phy_type = "ulpi";
+			dr_mode = "host";
 		};
 
-		/* USB2 is shared with localbus, so it must be disabled
-		   by default. We can't put 'status = "disabled";' here
-		   since U-Boot doesn't clear the status property when
-		   it enables USB2. OTOH, U-Boot does create a new node
-		   when there isn't any. So, just comment it out.
+		/* USB2 is shared with localbus. It is used
+		   only in case of SPI and SD boot*/
 		usb at 23000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -488,8 +486,8 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <46 0x2>;
 			phy_type = "ulpi";
+			dr_mode = "host";
 		};
-		*/
 
 		sdhci at 2e000 {
 			compatible = "fsl,p1020-esdhc", "fsl,esdhc";
-- 
1.6.1