[PATCH v6 3/6] video, sm501: add edid and commandline support

Grant Likely grant.likely at secretlab.ca
Tue May 3 08:37:11 EST 2011


On Mon, May 2, 2011 at 4:27 PM, Grant Likely <grant.likely at secretlab.ca> wrote:
> On Tue, Mar 22, 2011 at 09:27:29AM +0100, Heiko Schocher wrote:
>> - add commandline options:
>>   sm501fb.mode:
>>     Specify resolution as "<xres>x<yres>[-<bpp>][@<refresh>]"
>>   sm501fb.bpp:
>>     Specify bit-per-pixel if not specified mode
>>
>> - Add support for encoding display mode information
>>   in the device tree using verbatim EDID block.
>>
>>   If the "edid" entry in the "smi,sm501" node is present,
>>   the driver will build mode database using EDID data
>>   and allow setting the display modes from this database.
>>
>> Signed-off-by: Heiko Schocher <hs at denx.de>
>
> Merged, thanks.

This patch causes the following build warning:

  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x1d5572): Section mismatch in reference from
the function sm501fb_init_fb() to the variable
.devinit.data:sm501_default_mode
The function sm501fb_init_fb() references
the variable __devinitdata sm501_default_mode.
This is often because sm501fb_init_fb lacks a __devinitdata
annotation or the annotation of sm501_default_mode is wrong.

WARNING: vmlinux.o(.text+0x1d557a): Section mismatch in reference from
the function sm501fb_init_fb() to the variable
.devinit.data:sm501_default_mode
The function sm501fb_init_fb() references
the variable __devinitdata sm501_default_mode.
This is often because sm501fb_init_fb lacks a __devinitdata
annotation or the annotation of sm501_default_mode is wrong.

I've dropped the __devinitdata declaration in what I committed; can
you investigate and post a fixup patch?

>
> g.
>
>> cc: Wolfram Sang <w.sang at pengutronix.de>
>> cc: Grant Likely <grant.likely at secretlab.ca>
>> cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
>> cc: linux-fbdev at vger.kernel.org
>> cc: devicetree-discuss at ozlabs.org
>> cc: Ben Dooks <ben at simtec.co.uk>
>> cc: Vincent Sanders <vince at simtec.co.uk>
>> cc: Samuel Ortiz <sameo at linux.intel.com>
>> cc: linux-kernel at vger.kernel.org
>> cc: Randy Dunlap <rdunlap at xenotime.net>
>> cc: Wolfgang Denk <wd at denx.de>
>> cc: Paul Mundt <lethal at linux-sh.org>
>> ---
>> - changes since v1:
>>   add Ben Dooks, Vincent Sanders and Samuel Ortiz to cc, as suggested from
>>   Paul Mundt.
>> - changes since v2:
>>   add comments from Randy Dunlap:
>>   - move parameter documentation to Documentation/fb/sm501.txt
>> - changes since v3:
>>   - rebased against v2.6.38-rc2
>>   - split in 3 patches
>>     - of support patch
>>     - i/o routine patch
>>     - edid support patch
>> - changes since v4:
>>   - add "info->pdata = &sm501fb_def_pdata;" in sm501fb_probe()
>>     as Paul Mundt suggested (and I wrongly deleted)
>>   - move kfree(info->edid_data); to patch 3/4
>>     as edid_data is only allocated in the CONFIG_OF case
>> - changes for v6:
>>   - repost complete patchserie
>>   - rebased against current head
>>
>>  Documentation/fb/sm501.txt |   10 +++++++
>>  drivers/video/sm501fb.c    |   65 ++++++++++++++++++++++++++++++++++++++++---
>>  2 files changed, 70 insertions(+), 5 deletions(-)
>>  create mode 100644 Documentation/fb/sm501.txt
>>
>> diff --git a/Documentation/fb/sm501.txt b/Documentation/fb/sm501.txt
>> new file mode 100644
>> index 0000000..8d17aeb
>> --- /dev/null
>> +++ b/Documentation/fb/sm501.txt
>> @@ -0,0 +1,10 @@
>> +Configuration:
>> +
>> +You can pass the following kernel command line options to sm501 videoframebuffer:
>> +
>> +     sm501fb.bpp=    SM501 Display driver:
>> +                     Specifiy bits-per-pixel if not specified by 'mode'
>> +
>> +     sm501fb.mode=   SM501 Display driver:
>> +                     Specify resolution as
>> +                     "<xres>x<yres>[-<bpp>][@<refresh>]"
>> diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
>> index 5df406c..f31252c 100644
>> --- a/drivers/video/sm501fb.c
>> +++ b/drivers/video/sm501fb.c
>> @@ -41,6 +41,26 @@
>>  #include <linux/sm501.h>
>>  #include <linux/sm501-regs.h>
>>
>> +#include "edid.h"
>> +
>> +static char *fb_mode = "640x480-16 at 60";
>> +static unsigned long default_bpp = 16;
>> +
>> +static struct fb_videomode __devinitdata sm501_default_mode = {
>> +     .refresh        = 60,
>> +     .xres           = 640,
>> +     .yres           = 480,
>> +     .pixclock       = 20833,
>> +     .left_margin    = 142,
>> +     .right_margin   = 13,
>> +     .upper_margin   = 21,
>> +     .lower_margin   = 1,
>> +     .hsync_len      = 69,
>> +     .vsync_len      = 3,
>> +     .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
>> +     .vmode          = FB_VMODE_NONINTERLACED
>> +};
>> +
>>  #define NR_PALETTE   256
>>
>>  enum sm501_controller {
>> @@ -77,6 +97,7 @@ struct sm501fb_info {
>>       void __iomem            *regs2d;        /* 2d remapped registers */
>>       void __iomem            *fbmem;         /* remapped framebuffer */
>>       size_t                   fbmem_len;     /* length of remapped region */
>> +     u8 *edid_data;
>>  };
>>
>>  /* per-framebuffer private data */
>> @@ -1725,9 +1746,16 @@ static int sm501fb_init_fb(struct fb_info *fb,
>>       fb->var.vmode           = FB_VMODE_NONINTERLACED;
>>       fb->var.bits_per_pixel  = 16;
>>
>> +     if (info->edid_data) {
>> +                     /* Now build modedb from EDID */
>> +                     fb_edid_to_monspecs(info->edid_data, &fb->monspecs);
>> +                     fb_videomode_to_modelist(fb->monspecs.modedb,
>> +                                              fb->monspecs.modedb_len,
>> +                                              &fb->modelist);
>> +     }
>> +
>>       if (enable && (pd->flags & SM501FB_FLAG_USE_INIT_MODE) && 0) {
>>               /* TODO read the mode from the current display */
>> -
>>       } else {
>>               if (pd->def_mode) {
>>                       dev_info(info->dev, "using supplied mode\n");
>> @@ -1737,12 +1765,34 @@ static int sm501fb_init_fb(struct fb_info *fb,
>>                       fb->var.xres_virtual = fb->var.xres;
>>                       fb->var.yres_virtual = fb->var.yres;
>>               } else {
>> -                     ret = fb_find_mode(&fb->var, fb,
>> +                     if (info->edid_data)
>> +                             ret = fb_find_mode(&fb->var, fb, fb_mode,
>> +                                     fb->monspecs.modedb,
>> +                                     fb->monspecs.modedb_len,
>> +                                     &sm501_default_mode, default_bpp);
>> +                     else
>> +                             ret = fb_find_mode(&fb->var, fb,
>>                                          NULL, NULL, 0, NULL, 8);
>>
>> -                     if (ret == 0 || ret == 4) {
>> -                             dev_err(info->dev,
>> -                                     "failed to get initial mode\n");
>> +                     switch (ret) {
>> +                     case 1:
>> +                             dev_info(info->dev, "using mode specified in "
>> +                                             "@mode\n");
>> +                             break;
>> +                     case 2:
>> +                             dev_info(info->dev, "using mode specified in "
>> +                                     "@mode with ignored refresh rate\n");
>> +                             break;
>> +                     case 3:
>> +                             dev_info(info->dev, "using mode default "
>> +                                     "mode\n");
>> +                             break;
>> +                     case 4:
>> +                             dev_info(info->dev, "using mode from list\n");
>> +                             break;
>> +                     default:
>> +                             dev_info(info->dev, "ret = %d\n", ret);
>> +                             dev_info(info->dev, "failed to find mode\n");
>>                               return -EINVAL;
>>                       }
>>               }
>> @@ -2157,6 +2207,11 @@ static void __exit sm501fb_cleanup(void)
>>  module_init(sm501fb_init);
>>  module_exit(sm501fb_cleanup);
>>
>> +module_param_named(mode, fb_mode, charp, 0);
>> +MODULE_PARM_DESC(mode,
>> +     "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
>> +module_param_named(bpp, default_bpp, ulong, 0);
>> +MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified mode");
>>  MODULE_AUTHOR("Ben Dooks, Vincent Sanders");
>>  MODULE_DESCRIPTION("SM501 Framebuffer driver");
>>  MODULE_LICENSE("GPL v2");
>> --
>> 1.7.4
>>
>



-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.


More information about the Linuxppc-dev mailing list