[PATCH v6 2/6] video, sm501: add I/O functions for use on powerpc
Grant Likely
grant.likely at secretlab.ca
Tue May 3 08:24:21 EST 2011
On Tue, Mar 22, 2011 at 09:27:28AM +0100, Heiko Schocher wrote:
> - add read/write functions for using this driver
> also on powerpc plattforms
>
> Signed-off-by: Heiko Schocher <hs at denx.de>
> Acked-by: Samuel Ortiz <sameo at linux.intel.com>
Merged, thanks.
g.
> cc: Wolfram Sang <w.sang at pengutronix.de>
> cc: Grant Likely <grant.likely at secretlab.ca>
> cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
> cc: linux-fbdev at vger.kernel.org
> cc: devicetree-discuss at ozlabs.org
> cc: Ben Dooks <ben at simtec.co.uk>
> cc: Vincent Sanders <vince at simtec.co.uk>
> cc: Samuel Ortiz <sameo at linux.intel.com>
> cc: linux-kernel at vger.kernel.org
> cc: Randy Dunlap <rdunlap at xenotime.net>
> cc: Wolfgang Denk <wd at denx.de>
> cc: Paul Mundt <lethal at linux-sh.org>
> ---
> - changes since v1:
> add Ben Dooks, Vincent Sanders and Samuel Ortiz to cc, as suggested from
> Paul Mundt.
> - changes since v2:
> add comments from Randy Dunlap:
> - move parameter documentation to Documentation/fb/sm501.txt
> - changes since v3:
> - rebased against v2.6.38-rc2
> - split in 3 patches
> - of support patch
> - i/o routine patch
> - use ioread/write32{be} accessors instead of
> __do_readl/__do_writel{_be}
> - edid support patch
> - changes for v6:
> - repost complete patchserie
> - rebased against current head
>
> drivers/mfd/sm501.c | 125 +++++++++++++++++-----------------
> drivers/video/sm501fb.c | 172 ++++++++++++++++++++++++----------------------
> include/linux/sm501.h | 8 ++
> 3 files changed, 161 insertions(+), 144 deletions(-)
>
> diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
> index 5de3a76..558d5f3 100644
> --- a/drivers/mfd/sm501.c
> +++ b/drivers/mfd/sm501.c
> @@ -133,10 +133,10 @@ static unsigned long decode_div(unsigned long pll2, unsigned long val,
>
> static void sm501_dump_clk(struct sm501_devdata *sm)
> {
> - unsigned long misct = readl(sm->regs + SM501_MISC_TIMING);
> - unsigned long pm0 = readl(sm->regs + SM501_POWER_MODE_0_CLOCK);
> - unsigned long pm1 = readl(sm->regs + SM501_POWER_MODE_1_CLOCK);
> - unsigned long pmc = readl(sm->regs + SM501_POWER_MODE_CONTROL);
> + unsigned long misct = smc501_readl(sm->regs + SM501_MISC_TIMING);
> + unsigned long pm0 = smc501_readl(sm->regs + SM501_POWER_MODE_0_CLOCK);
> + unsigned long pm1 = smc501_readl(sm->regs + SM501_POWER_MODE_1_CLOCK);
> + unsigned long pmc = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
> unsigned long sdclk0, sdclk1;
> unsigned long pll2 = 0;
>
> @@ -193,29 +193,29 @@ static void sm501_dump_regs(struct sm501_devdata *sm)
> void __iomem *regs = sm->regs;
>
> dev_info(sm->dev, "System Control %08x\n",
> - readl(regs + SM501_SYSTEM_CONTROL));
> + smc501_readl(regs + SM501_SYSTEM_CONTROL));
> dev_info(sm->dev, "Misc Control %08x\n",
> - readl(regs + SM501_MISC_CONTROL));
> + smc501_readl(regs + SM501_MISC_CONTROL));
> dev_info(sm->dev, "GPIO Control Low %08x\n",
> - readl(regs + SM501_GPIO31_0_CONTROL));
> + smc501_readl(regs + SM501_GPIO31_0_CONTROL));
> dev_info(sm->dev, "GPIO Control Hi %08x\n",
> - readl(regs + SM501_GPIO63_32_CONTROL));
> + smc501_readl(regs + SM501_GPIO63_32_CONTROL));
> dev_info(sm->dev, "DRAM Control %08x\n",
> - readl(regs + SM501_DRAM_CONTROL));
> + smc501_readl(regs + SM501_DRAM_CONTROL));
> dev_info(sm->dev, "Arbitration Ctrl %08x\n",
> - readl(regs + SM501_ARBTRTN_CONTROL));
> + smc501_readl(regs + SM501_ARBTRTN_CONTROL));
> dev_info(sm->dev, "Misc Timing %08x\n",
> - readl(regs + SM501_MISC_TIMING));
> + smc501_readl(regs + SM501_MISC_TIMING));
> }
>
> static void sm501_dump_gate(struct sm501_devdata *sm)
> {
> dev_info(sm->dev, "CurrentGate %08x\n",
> - readl(sm->regs + SM501_CURRENT_GATE));
> + smc501_readl(sm->regs + SM501_CURRENT_GATE));
> dev_info(sm->dev, "CurrentClock %08x\n",
> - readl(sm->regs + SM501_CURRENT_CLOCK));
> + smc501_readl(sm->regs + SM501_CURRENT_CLOCK));
> dev_info(sm->dev, "PowerModeControl %08x\n",
> - readl(sm->regs + SM501_POWER_MODE_CONTROL));
> + smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL));
> }
>
> #else
> @@ -231,7 +231,7 @@ static inline void sm501_dump_clk(struct sm501_devdata *sm) { }
>
> static void sm501_sync_regs(struct sm501_devdata *sm)
> {
> - readl(sm->regs);
> + smc501_readl(sm->regs);
> }
>
> static inline void sm501_mdelay(struct sm501_devdata *sm, unsigned int delay)
> @@ -261,11 +261,11 @@ int sm501_misc_control(struct device *dev,
>
> spin_lock_irqsave(&sm->reg_lock, save);
>
> - misc = readl(sm->regs + SM501_MISC_CONTROL);
> + misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
> to = (misc & ~clear) | set;
>
> if (to != misc) {
> - writel(to, sm->regs + SM501_MISC_CONTROL);
> + smc501_writel(to, sm->regs + SM501_MISC_CONTROL);
> sm501_sync_regs(sm);
>
> dev_dbg(sm->dev, "MISC_CONTROL %08lx\n", misc);
> @@ -294,11 +294,11 @@ unsigned long sm501_modify_reg(struct device *dev,
>
> spin_lock_irqsave(&sm->reg_lock, save);
>
> - data = readl(sm->regs + reg);
> + data = smc501_readl(sm->regs + reg);
> data |= set;
> data &= ~clear;
>
> - writel(data, sm->regs + reg);
> + smc501_writel(data, sm->regs + reg);
> sm501_sync_regs(sm);
>
> spin_unlock_irqrestore(&sm->reg_lock, save);
> @@ -322,9 +322,9 @@ int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
>
> mutex_lock(&sm->clock_lock);
>
> - mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
> - gate = readl(sm->regs + SM501_CURRENT_GATE);
> - clock = readl(sm->regs + SM501_CURRENT_CLOCK);
> + mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
> + gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
> + clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
>
> mode &= 3; /* get current power mode */
>
> @@ -356,14 +356,14 @@ int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
>
> switch (mode) {
> case 1:
> - writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
> - writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
> + smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
> + smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
> mode = 0;
> break;
> case 2:
> case 0:
> - writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
> - writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
> + smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
> + smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
> mode = 1;
> break;
>
> @@ -372,7 +372,7 @@ int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
> goto already;
> }
>
> - writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
> + smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
> sm501_sync_regs(sm);
>
> dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
> @@ -519,9 +519,9 @@ unsigned long sm501_set_clock(struct device *dev,
> unsigned long req_freq)
> {
> struct sm501_devdata *sm = dev_get_drvdata(dev);
> - unsigned long mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
> - unsigned long gate = readl(sm->regs + SM501_CURRENT_GATE);
> - unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK);
> + unsigned long mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
> + unsigned long gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
> + unsigned long clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
> unsigned char reg;
> unsigned int pll_reg = 0;
> unsigned long sm501_freq; /* the actual frequency achieved */
> @@ -592,9 +592,9 @@ unsigned long sm501_set_clock(struct device *dev,
>
> mutex_lock(&sm->clock_lock);
>
> - mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
> - gate = readl(sm->regs + SM501_CURRENT_GATE);
> - clock = readl(sm->regs + SM501_CURRENT_CLOCK);
> + mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
> + gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
> + clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
>
> clock = clock & ~(0xFF << clksrc);
> clock |= reg<<clksrc;
> @@ -603,14 +603,14 @@ unsigned long sm501_set_clock(struct device *dev,
>
> switch (mode) {
> case 1:
> - writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
> - writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
> + smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
> + smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
> mode = 0;
> break;
> case 2:
> case 0:
> - writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
> - writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
> + smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
> + smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
> mode = 1;
> break;
>
> @@ -619,10 +619,11 @@ unsigned long sm501_set_clock(struct device *dev,
> return -1;
> }
>
> - writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
> + smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
>
> if (pll_reg)
> - writel(pll_reg, sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
> + smc501_writel(pll_reg,
> + sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
>
> sm501_sync_regs(sm);
>
> @@ -902,7 +903,7 @@ static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
> struct sm501_gpio_chip *smgpio = to_sm501_gpio(chip);
> unsigned long result;
>
> - result = readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
> + result = smc501_readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
> result >>= offset;
>
> return result & 1UL;
> @@ -915,13 +916,13 @@ static void sm501_gpio_ensure_gpio(struct sm501_gpio_chip *smchip,
>
> /* check and modify if this pin is not set as gpio. */
>
> - if (readl(smchip->control) & bit) {
> + if (smc501_readl(smchip->control) & bit) {
> dev_info(sm501_gpio_to_dev(smchip->ourgpio)->dev,
> "changing mode of gpio, bit %08lx\n", bit);
>
> - ctrl = readl(smchip->control);
> + ctrl = smc501_readl(smchip->control);
> ctrl &= ~bit;
> - writel(ctrl, smchip->control);
> + smc501_writel(ctrl, smchip->control);
>
> sm501_sync_regs(sm501_gpio_to_dev(smchip->ourgpio));
> }
> @@ -942,10 +943,10 @@ static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
>
> spin_lock_irqsave(&smgpio->lock, save);
>
> - val = readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
> + val = smc501_readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
> if (value)
> val |= bit;
> - writel(val, regs);
> + smc501_writel(val, regs);
>
> sm501_sync_regs(sm501_gpio_to_dev(smgpio));
> sm501_gpio_ensure_gpio(smchip, bit);
> @@ -967,8 +968,8 @@ static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
>
> spin_lock_irqsave(&smgpio->lock, save);
>
> - ddr = readl(regs + SM501_GPIO_DDR_LOW);
> - writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
> + ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
> + smc501_writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
>
> sm501_sync_regs(sm501_gpio_to_dev(smgpio));
> sm501_gpio_ensure_gpio(smchip, bit);
> @@ -994,18 +995,18 @@ static int sm501_gpio_output(struct gpio_chip *chip,
>
> spin_lock_irqsave(&smgpio->lock, save);
>
> - val = readl(regs + SM501_GPIO_DATA_LOW);
> + val = smc501_readl(regs + SM501_GPIO_DATA_LOW);
> if (value)
> val |= bit;
> else
> val &= ~bit;
> - writel(val, regs);
> + smc501_writel(val, regs);
>
> - ddr = readl(regs + SM501_GPIO_DDR_LOW);
> - writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
> + ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
> + smc501_writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
>
> sm501_sync_regs(sm501_gpio_to_dev(smgpio));
> - writel(val, regs + SM501_GPIO_DATA_LOW);
> + smc501_writel(val, regs + SM501_GPIO_DATA_LOW);
>
> sm501_sync_regs(sm501_gpio_to_dev(smgpio));
> spin_unlock_irqrestore(&smgpio->lock, save);
> @@ -1231,7 +1232,7 @@ static ssize_t sm501_dbg_regs(struct device *dev,
>
> for (reg = 0x00; reg < 0x70; reg += 4) {
> ret = sprintf(ptr, "%08x = %08x\n",
> - reg, readl(sm->regs + reg));
> + reg, smc501_readl(sm->regs + reg));
> ptr += ret;
> }
>
> @@ -1255,10 +1256,10 @@ static inline void sm501_init_reg(struct sm501_devdata *sm,
> {
> unsigned long tmp;
>
> - tmp = readl(sm->regs + reg);
> + tmp = smc501_readl(sm->regs + reg);
> tmp &= ~r->mask;
> tmp |= r->set;
> - writel(tmp, sm->regs + reg);
> + smc501_writel(tmp, sm->regs + reg);
> }
>
> /* sm501_init_regs
> @@ -1299,7 +1300,7 @@ static void sm501_init_regs(struct sm501_devdata *sm,
>
> static int sm501_check_clocks(struct sm501_devdata *sm)
> {
> - unsigned long pwrmode = readl(sm->regs + SM501_CURRENT_CLOCK);
> + unsigned long pwrmode = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
> unsigned long msrc = (pwrmode & SM501_POWERMODE_M_SRC);
> unsigned long m1src = (pwrmode & SM501_POWERMODE_M1_SRC);
>
> @@ -1334,7 +1335,7 @@ static int __devinit sm501_init_dev(struct sm501_devdata *sm)
>
> INIT_LIST_HEAD(&sm->devices);
>
> - devid = readl(sm->regs + SM501_DEVICEID);
> + devid = smc501_readl(sm->regs + SM501_DEVICEID);
>
> if ((devid & SM501_DEVICEID_IDMASK) != SM501_DEVICEID_SM501) {
> dev_err(sm->dev, "incorrect device id %08lx\n", devid);
> @@ -1342,9 +1343,9 @@ static int __devinit sm501_init_dev(struct sm501_devdata *sm)
> }
>
> /* disable irqs */
> - writel(0, sm->regs + SM501_IRQ_MASK);
> + smc501_writel(0, sm->regs + SM501_IRQ_MASK);
>
> - dramctrl = readl(sm->regs + SM501_DRAM_CONTROL);
> + dramctrl = smc501_readl(sm->regs + SM501_DRAM_CONTROL);
> mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7];
>
> dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n",
> @@ -1489,7 +1490,7 @@ static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state)
> struct sm501_devdata *sm = platform_get_drvdata(pdev);
>
> sm->in_suspend = 1;
> - sm->pm_misc = readl(sm->regs + SM501_MISC_CONTROL);
> + sm->pm_misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
>
> sm501_dump_regs(sm);
>
> @@ -1513,9 +1514,9 @@ static int sm501_plat_resume(struct platform_device *pdev)
>
> /* check to see if we are in the same state as when suspended */
>
> - if (readl(sm->regs + SM501_MISC_CONTROL) != sm->pm_misc) {
> + if (smc501_readl(sm->regs + SM501_MISC_CONTROL) != sm->pm_misc) {
> dev_info(sm->dev, "SM501_MISC_CONTROL changed over sleep\n");
> - writel(sm->pm_misc, sm->regs + SM501_MISC_CONTROL);
> + smc501_writel(sm->pm_misc, sm->regs + SM501_MISC_CONTROL);
>
> /* our suspend causes the controller state to change,
> * either by something attempting setup, power loss,
> diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
> index bcb44a5..5df406c 100644
> --- a/drivers/video/sm501fb.c
> +++ b/drivers/video/sm501fb.c
> @@ -117,7 +117,7 @@ static inline int v_total(struct fb_var_screeninfo *var)
>
> static inline void sm501fb_sync_regs(struct sm501fb_info *info)
> {
> - readl(info->regs);
> + smc501_readl(info->regs);
> }
>
> /* sm501_alloc_mem
> @@ -262,7 +262,7 @@ static void sm501fb_setup_gamma(struct sm501fb_info *fbi,
>
> /* set gamma values */
> for (offset = 0; offset < 256 * 4; offset += 4) {
> - writel(value, fbi->regs + palette + offset);
> + smc501_writel(value, fbi->regs + palette + offset);
> value += 0x010101; /* Advance RGB by 1,1,1.*/
> }
> }
> @@ -476,7 +476,8 @@ static int sm501fb_set_par_common(struct fb_info *info,
>
> /* set start of framebuffer to the screen */
>
> - writel(par->screen.sm_addr | SM501_ADDR_FLIP, fbi->regs + head_addr);
> + smc501_writel(par->screen.sm_addr | SM501_ADDR_FLIP,
> + fbi->regs + head_addr);
>
> /* program CRT clock */
>
> @@ -519,7 +520,7 @@ static void sm501fb_set_par_geometry(struct fb_info *info,
> reg = info->fix.line_length;
> reg |= ((var->xres * var->bits_per_pixel)/8) << 16;
>
> - writel(reg, fbi->regs + (par->head == HEAD_CRT ?
> + smc501_writel(reg, fbi->regs + (par->head == HEAD_CRT ?
> SM501_DC_CRT_FB_OFFSET : SM501_DC_PANEL_FB_OFFSET));
>
> /* program horizontal total */
> @@ -527,27 +528,27 @@ static void sm501fb_set_par_geometry(struct fb_info *info,
> reg = (h_total(var) - 1) << 16;
> reg |= (var->xres - 1);
>
> - writel(reg, base + SM501_OFF_DC_H_TOT);
> + smc501_writel(reg, base + SM501_OFF_DC_H_TOT);
>
> /* program horizontal sync */
>
> reg = var->hsync_len << 16;
> reg |= var->xres + var->right_margin - 1;
>
> - writel(reg, base + SM501_OFF_DC_H_SYNC);
> + smc501_writel(reg, base + SM501_OFF_DC_H_SYNC);
>
> /* program vertical total */
>
> reg = (v_total(var) - 1) << 16;
> reg |= (var->yres - 1);
>
> - writel(reg, base + SM501_OFF_DC_V_TOT);
> + smc501_writel(reg, base + SM501_OFF_DC_V_TOT);
>
> /* program vertical sync */
> reg = var->vsync_len << 16;
> reg |= var->yres + var->lower_margin - 1;
>
> - writel(reg, base + SM501_OFF_DC_V_SYNC);
> + smc501_writel(reg, base + SM501_OFF_DC_V_SYNC);
> }
>
> /* sm501fb_pan_crt
> @@ -566,15 +567,15 @@ static int sm501fb_pan_crt(struct fb_var_screeninfo *var,
>
> xoffs = var->xoffset * bytes_pixel;
>
> - reg = readl(fbi->regs + SM501_DC_CRT_CONTROL);
> + reg = smc501_readl(fbi->regs + SM501_DC_CRT_CONTROL);
>
> reg &= ~SM501_DC_CRT_CONTROL_PIXEL_MASK;
> reg |= ((xoffs & 15) / bytes_pixel) << 4;
> - writel(reg, fbi->regs + SM501_DC_CRT_CONTROL);
> + smc501_writel(reg, fbi->regs + SM501_DC_CRT_CONTROL);
>
> reg = (par->screen.sm_addr + xoffs +
> var->yoffset * info->fix.line_length);
> - writel(reg | SM501_ADDR_FLIP, fbi->regs + SM501_DC_CRT_FB_ADDR);
> + smc501_writel(reg | SM501_ADDR_FLIP, fbi->regs + SM501_DC_CRT_FB_ADDR);
>
> sm501fb_sync_regs(fbi);
> return 0;
> @@ -593,10 +594,10 @@ static int sm501fb_pan_pnl(struct fb_var_screeninfo *var,
> unsigned long reg;
>
> reg = var->xoffset | (var->xres_virtual << 16);
> - writel(reg, fbi->regs + SM501_DC_PANEL_FB_WIDTH);
> + smc501_writel(reg, fbi->regs + SM501_DC_PANEL_FB_WIDTH);
>
> reg = var->yoffset | (var->yres_virtual << 16);
> - writel(reg, fbi->regs + SM501_DC_PANEL_FB_HEIGHT);
> + smc501_writel(reg, fbi->regs + SM501_DC_PANEL_FB_HEIGHT);
>
> sm501fb_sync_regs(fbi);
> return 0;
> @@ -622,7 +623,7 @@ static int sm501fb_set_par_crt(struct fb_info *info)
> /* enable CRT DAC - note 0 is on!*/
> sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER);
>
> - control = readl(fbi->regs + SM501_DC_CRT_CONTROL);
> + control = smc501_readl(fbi->regs + SM501_DC_CRT_CONTROL);
>
> control &= (SM501_DC_CRT_CONTROL_PIXEL_MASK |
> SM501_DC_CRT_CONTROL_GAMMA |
> @@ -684,7 +685,7 @@ static int sm501fb_set_par_crt(struct fb_info *info)
> out_update:
> dev_dbg(fbi->dev, "new control is %08lx\n", control);
>
> - writel(control, fbi->regs + SM501_DC_CRT_CONTROL);
> + smc501_writel(control, fbi->regs + SM501_DC_CRT_CONTROL);
> sm501fb_sync_regs(fbi);
>
> return 0;
> @@ -696,18 +697,18 @@ static void sm501fb_panel_power(struct sm501fb_info *fbi, int to)
> void __iomem *ctrl_reg = fbi->regs + SM501_DC_PANEL_CONTROL;
> struct sm501_platdata_fbsub *pd = fbi->pdata->fb_pnl;
>
> - control = readl(ctrl_reg);
> + control = smc501_readl(ctrl_reg);
>
> if (to && (control & SM501_DC_PANEL_CONTROL_VDD) == 0) {
> /* enable panel power */
>
> control |= SM501_DC_PANEL_CONTROL_VDD; /* FPVDDEN */
> - writel(control, ctrl_reg);
> + smc501_writel(control, ctrl_reg);
> sm501fb_sync_regs(fbi);
> mdelay(10);
>
> control |= SM501_DC_PANEL_CONTROL_DATA; /* DATA */
> - writel(control, ctrl_reg);
> + smc501_writel(control, ctrl_reg);
> sm501fb_sync_regs(fbi);
> mdelay(10);
>
> @@ -719,7 +720,7 @@ static void sm501fb_panel_power(struct sm501fb_info *fbi, int to)
> else
> control |= SM501_DC_PANEL_CONTROL_BIAS;
>
> - writel(control, ctrl_reg);
> + smc501_writel(control, ctrl_reg);
> sm501fb_sync_regs(fbi);
> mdelay(10);
> }
> @@ -730,7 +731,7 @@ static void sm501fb_panel_power(struct sm501fb_info *fbi, int to)
> else
> control |= SM501_DC_PANEL_CONTROL_FPEN;
>
> - writel(control, ctrl_reg);
> + smc501_writel(control, ctrl_reg);
> sm501fb_sync_regs(fbi);
> mdelay(10);
> }
> @@ -742,7 +743,7 @@ static void sm501fb_panel_power(struct sm501fb_info *fbi, int to)
> else
> control &= ~SM501_DC_PANEL_CONTROL_FPEN;
>
> - writel(control, ctrl_reg);
> + smc501_writel(control, ctrl_reg);
> sm501fb_sync_regs(fbi);
> mdelay(10);
> }
> @@ -753,18 +754,18 @@ static void sm501fb_panel_power(struct sm501fb_info *fbi, int to)
> else
> control &= ~SM501_DC_PANEL_CONTROL_BIAS;
>
> - writel(control, ctrl_reg);
> + smc501_writel(control, ctrl_reg);
> sm501fb_sync_regs(fbi);
> mdelay(10);
> }
>
> control &= ~SM501_DC_PANEL_CONTROL_DATA;
> - writel(control, ctrl_reg);
> + smc501_writel(control, ctrl_reg);
> sm501fb_sync_regs(fbi);
> mdelay(10);
>
> control &= ~SM501_DC_PANEL_CONTROL_VDD;
> - writel(control, ctrl_reg);
> + smc501_writel(control, ctrl_reg);
> sm501fb_sync_regs(fbi);
> mdelay(10);
> }
> @@ -799,7 +800,7 @@ static int sm501fb_set_par_pnl(struct fb_info *info)
>
> /* update control register */
>
> - control = readl(fbi->regs + SM501_DC_PANEL_CONTROL);
> + control = smc501_readl(fbi->regs + SM501_DC_PANEL_CONTROL);
> control &= (SM501_DC_PANEL_CONTROL_GAMMA |
> SM501_DC_PANEL_CONTROL_VDD |
> SM501_DC_PANEL_CONTROL_DATA |
> @@ -833,16 +834,16 @@ static int sm501fb_set_par_pnl(struct fb_info *info)
> BUG();
> }
>
> - writel(0x0, fbi->regs + SM501_DC_PANEL_PANNING_CONTROL);
> + smc501_writel(0x0, fbi->regs + SM501_DC_PANEL_PANNING_CONTROL);
>
> /* panel plane top left and bottom right location */
>
> - writel(0x00, fbi->regs + SM501_DC_PANEL_TL_LOC);
> + smc501_writel(0x00, fbi->regs + SM501_DC_PANEL_TL_LOC);
>
> reg = var->xres - 1;
> reg |= (var->yres - 1) << 16;
>
> - writel(reg, fbi->regs + SM501_DC_PANEL_BR_LOC);
> + smc501_writel(reg, fbi->regs + SM501_DC_PANEL_BR_LOC);
>
> /* program panel control register */
>
> @@ -855,7 +856,7 @@ static int sm501fb_set_par_pnl(struct fb_info *info)
> if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0)
> control |= SM501_DC_PANEL_CONTROL_VSP;
>
> - writel(control, fbi->regs + SM501_DC_PANEL_CONTROL);
> + smc501_writel(control, fbi->regs + SM501_DC_PANEL_CONTROL);
> sm501fb_sync_regs(fbi);
>
> /* ensure the panel interface is not tristated at this point */
> @@ -924,7 +925,7 @@ static int sm501fb_setcolreg(unsigned regno,
> val |= (green >> 8) << 8;
> val |= blue >> 8;
>
> - writel(val, base + (regno * 4));
> + smc501_writel(val, base + (regno * 4));
> }
>
> break;
> @@ -980,7 +981,7 @@ static int sm501fb_blank_crt(int blank_mode, struct fb_info *info)
>
> dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info);
>
> - ctrl = readl(fbi->regs + SM501_DC_CRT_CONTROL);
> + ctrl = smc501_readl(fbi->regs + SM501_DC_CRT_CONTROL);
>
> switch (blank_mode) {
> case FB_BLANK_POWERDOWN:
> @@ -1004,7 +1005,7 @@ static int sm501fb_blank_crt(int blank_mode, struct fb_info *info)
>
> }
>
> - writel(ctrl, fbi->regs + SM501_DC_CRT_CONTROL);
> + smc501_writel(ctrl, fbi->regs + SM501_DC_CRT_CONTROL);
> sm501fb_sync_regs(fbi);
>
> return 0;
> @@ -1041,12 +1042,14 @@ static int sm501fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
> if (cursor->image.depth > 1)
> return -EINVAL;
>
> - hwc_addr = readl(base + SM501_OFF_HWC_ADDR);
> + hwc_addr = smc501_readl(base + SM501_OFF_HWC_ADDR);
>
> if (cursor->enable)
> - writel(hwc_addr | SM501_HWC_EN, base + SM501_OFF_HWC_ADDR);
> + smc501_writel(hwc_addr | SM501_HWC_EN,
> + base + SM501_OFF_HWC_ADDR);
> else
> - writel(hwc_addr & ~SM501_HWC_EN, base + SM501_OFF_HWC_ADDR);
> + smc501_writel(hwc_addr & ~SM501_HWC_EN,
> + base + SM501_OFF_HWC_ADDR);
>
> /* set data */
> if (cursor->set & FB_CUR_SETPOS) {
> @@ -1060,7 +1063,7 @@ static int sm501fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
>
> //y += cursor->image.height;
>
> - writel(x | (y << 16), base + SM501_OFF_HWC_LOC);
> + smc501_writel(x | (y << 16), base + SM501_OFF_HWC_LOC);
> }
>
> if (cursor->set & FB_CUR_SETCMAP) {
> @@ -1080,8 +1083,8 @@ static int sm501fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
>
> dev_dbg(fbi->dev, "fgcol %08lx, bgcol %08lx\n", fg, bg);
>
> - writel(bg, base + SM501_OFF_HWC_COLOR_1_2);
> - writel(fg, base + SM501_OFF_HWC_COLOR_3);
> + smc501_writel(bg, base + SM501_OFF_HWC_COLOR_1_2);
> + smc501_writel(fg, base + SM501_OFF_HWC_COLOR_3);
> }
>
> if (cursor->set & FB_CUR_SETSIZE ||
> @@ -1102,7 +1105,7 @@ static int sm501fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
> __func__, cursor->image.width, cursor->image.height);
>
> for (op = 0; op < (64*64*2)/8; op+=4)
> - writel(0x0, dst + op);
> + smc501_writel(0x0, dst + op);
>
> for (y = 0; y < cursor->image.height; y++) {
> for (x = 0; x < cursor->image.width; x++) {
> @@ -1141,7 +1144,7 @@ static ssize_t sm501fb_crtsrc_show(struct device *dev,
> struct sm501fb_info *info = dev_get_drvdata(dev);
> unsigned long ctrl;
>
> - ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
> + ctrl = smc501_readl(info->regs + SM501_DC_CRT_CONTROL);
> ctrl &= SM501_DC_CRT_CONTROL_SEL;
>
> return snprintf(buf, PAGE_SIZE, "%s\n", ctrl ? "crt" : "panel");
> @@ -1172,7 +1175,7 @@ static ssize_t sm501fb_crtsrc_store(struct device *dev,
>
> dev_info(dev, "setting crt source to head %d\n", head);
>
> - ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
> + ctrl = smc501_readl(info->regs + SM501_DC_CRT_CONTROL);
>
> if (head == HEAD_CRT) {
> ctrl |= SM501_DC_CRT_CONTROL_SEL;
> @@ -1184,7 +1187,7 @@ static ssize_t sm501fb_crtsrc_store(struct device *dev,
> ctrl &= ~SM501_DC_CRT_CONTROL_TE;
> }
>
> - writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
> + smc501_writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
> sm501fb_sync_regs(info);
>
> return len;
> @@ -1205,7 +1208,8 @@ static int sm501fb_show_regs(struct sm501fb_info *info, char *ptr,
> unsigned int reg;
>
> for (reg = start; reg < (len + start); reg += 4)
> - ptr += sprintf(ptr, "%08x = %08x\n", reg, readl(mem + reg));
> + ptr += sprintf(ptr, "%08x = %08x\n", reg,
> + smc501_readl(mem + reg));
>
> return ptr - buf;
> }
> @@ -1257,7 +1261,7 @@ static int sm501fb_sync(struct fb_info *info)
>
> /* wait for the 2d engine to be ready */
> while ((count > 0) &&
> - (readl(fbi->regs + SM501_SYSTEM_CONTROL) &
> + (smc501_readl(fbi->regs + SM501_SYSTEM_CONTROL) &
> SM501_SYSCTRL_2D_ENGINE_STATUS) != 0)
> count--;
>
> @@ -1312,45 +1316,46 @@ static void sm501fb_copyarea(struct fb_info *info, const struct fb_copyarea *are
> return;
>
> /* set the base addresses */
> - writel(par->screen.sm_addr, fbi->regs2d + SM501_2D_SOURCE_BASE);
> - writel(par->screen.sm_addr, fbi->regs2d + SM501_2D_DESTINATION_BASE);
> + smc501_writel(par->screen.sm_addr, fbi->regs2d + SM501_2D_SOURCE_BASE);
> + smc501_writel(par->screen.sm_addr,
> + fbi->regs2d + SM501_2D_DESTINATION_BASE);
>
> /* set the window width */
> - writel((info->var.xres << 16) | info->var.xres,
> + smc501_writel((info->var.xres << 16) | info->var.xres,
> fbi->regs2d + SM501_2D_WINDOW_WIDTH);
>
> /* set window stride */
> - writel((info->var.xres_virtual << 16) | info->var.xres_virtual,
> + smc501_writel((info->var.xres_virtual << 16) | info->var.xres_virtual,
> fbi->regs2d + SM501_2D_PITCH);
>
> /* set data format */
> switch (info->var.bits_per_pixel) {
> case 8:
> - writel(0, fbi->regs2d + SM501_2D_STRETCH);
> + smc501_writel(0, fbi->regs2d + SM501_2D_STRETCH);
> break;
> case 16:
> - writel(0x00100000, fbi->regs2d + SM501_2D_STRETCH);
> + smc501_writel(0x00100000, fbi->regs2d + SM501_2D_STRETCH);
> break;
> case 32:
> - writel(0x00200000, fbi->regs2d + SM501_2D_STRETCH);
> + smc501_writel(0x00200000, fbi->regs2d + SM501_2D_STRETCH);
> break;
> }
>
> /* 2d compare mask */
> - writel(0xffffffff, fbi->regs2d + SM501_2D_COLOR_COMPARE_MASK);
> + smc501_writel(0xffffffff, fbi->regs2d + SM501_2D_COLOR_COMPARE_MASK);
>
> /* 2d mask */
> - writel(0xffffffff, fbi->regs2d + SM501_2D_MASK);
> + smc501_writel(0xffffffff, fbi->regs2d + SM501_2D_MASK);
>
> /* source and destination x y */
> - writel((sx << 16) | sy, fbi->regs2d + SM501_2D_SOURCE);
> - writel((dx << 16) | dy, fbi->regs2d + SM501_2D_DESTINATION);
> + smc501_writel((sx << 16) | sy, fbi->regs2d + SM501_2D_SOURCE);
> + smc501_writel((dx << 16) | dy, fbi->regs2d + SM501_2D_DESTINATION);
>
> /* w/h */
> - writel((width << 16) | height, fbi->regs2d + SM501_2D_DIMENSION);
> + smc501_writel((width << 16) | height, fbi->regs2d + SM501_2D_DIMENSION);
>
> /* do area move */
> - writel(0x800000cc | rtl, fbi->regs2d + SM501_2D_CONTROL);
> + smc501_writel(0x800000cc | rtl, fbi->regs2d + SM501_2D_CONTROL);
> }
>
> static void sm501fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
> @@ -1372,47 +1377,49 @@ static void sm501fb_fillrect(struct fb_info *info, const struct fb_fillrect *rec
> return;
>
> /* set the base addresses */
> - writel(par->screen.sm_addr, fbi->regs2d + SM501_2D_SOURCE_BASE);
> - writel(par->screen.sm_addr, fbi->regs2d + SM501_2D_DESTINATION_BASE);
> + smc501_writel(par->screen.sm_addr, fbi->regs2d + SM501_2D_SOURCE_BASE);
> + smc501_writel(par->screen.sm_addr,
> + fbi->regs2d + SM501_2D_DESTINATION_BASE);
>
> /* set the window width */
> - writel((info->var.xres << 16) | info->var.xres,
> + smc501_writel((info->var.xres << 16) | info->var.xres,
> fbi->regs2d + SM501_2D_WINDOW_WIDTH);
>
> /* set window stride */
> - writel((info->var.xres_virtual << 16) | info->var.xres_virtual,
> + smc501_writel((info->var.xres_virtual << 16) | info->var.xres_virtual,
> fbi->regs2d + SM501_2D_PITCH);
>
> /* set data format */
> switch (info->var.bits_per_pixel) {
> case 8:
> - writel(0, fbi->regs2d + SM501_2D_STRETCH);
> + smc501_writel(0, fbi->regs2d + SM501_2D_STRETCH);
> break;
> case 16:
> - writel(0x00100000, fbi->regs2d + SM501_2D_STRETCH);
> + smc501_writel(0x00100000, fbi->regs2d + SM501_2D_STRETCH);
> break;
> case 32:
> - writel(0x00200000, fbi->regs2d + SM501_2D_STRETCH);
> + smc501_writel(0x00200000, fbi->regs2d + SM501_2D_STRETCH);
> break;
> }
>
> /* 2d compare mask */
> - writel(0xffffffff, fbi->regs2d + SM501_2D_COLOR_COMPARE_MASK);
> + smc501_writel(0xffffffff, fbi->regs2d + SM501_2D_COLOR_COMPARE_MASK);
>
> /* 2d mask */
> - writel(0xffffffff, fbi->regs2d + SM501_2D_MASK);
> + smc501_writel(0xffffffff, fbi->regs2d + SM501_2D_MASK);
>
> /* colour */
> - writel(rect->color, fbi->regs2d + SM501_2D_FOREGROUND);
> + smc501_writel(rect->color, fbi->regs2d + SM501_2D_FOREGROUND);
>
> /* x y */
> - writel((rect->dx << 16) | rect->dy, fbi->regs2d + SM501_2D_DESTINATION);
> + smc501_writel((rect->dx << 16) | rect->dy,
> + fbi->regs2d + SM501_2D_DESTINATION);
>
> /* w/h */
> - writel((width << 16) | height, fbi->regs2d + SM501_2D_DIMENSION);
> + smc501_writel((width << 16) | height, fbi->regs2d + SM501_2D_DIMENSION);
>
> /* do rectangle fill */
> - writel(0x800100cc, fbi->regs2d + SM501_2D_CONTROL);
> + smc501_writel(0x800100cc, fbi->regs2d + SM501_2D_CONTROL);
> }
>
>
> @@ -1470,11 +1477,12 @@ static int sm501_init_cursor(struct fb_info *fbi, unsigned int reg_base)
>
> /* initialise the colour registers */
>
> - writel(par->cursor.sm_addr, par->cursor_regs + SM501_OFF_HWC_ADDR);
> + smc501_writel(par->cursor.sm_addr,
> + par->cursor_regs + SM501_OFF_HWC_ADDR);
>
> - writel(0x00, par->cursor_regs + SM501_OFF_HWC_LOC);
> - writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_1_2);
> - writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_3);
> + smc501_writel(0x00, par->cursor_regs + SM501_OFF_HWC_LOC);
> + smc501_writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_1_2);
> + smc501_writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_3);
> sm501fb_sync_regs(info);
>
> return 0;
> @@ -1581,7 +1589,7 @@ static int sm501fb_start(struct sm501fb_info *info,
>
> /* clear palette ram - undefined at power on */
> for (k = 0; k < (256 * 3); k++)
> - writel(0, info->regs + SM501_DC_PANEL_PALETTE + (k * 4));
> + smc501_writel(0, info->regs + SM501_DC_PANEL_PALETTE + (k * 4));
>
> /* enable display controller */
> sm501_unit_power(dev->parent, SM501_GATE_DISPLAY, 1);
> @@ -1649,20 +1657,20 @@ static int sm501fb_init_fb(struct fb_info *fb,
> switch (head) {
> case HEAD_CRT:
> pd = info->pdata->fb_crt;
> - ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
> + ctrl = smc501_readl(info->regs + SM501_DC_CRT_CONTROL);
> enable = (ctrl & SM501_DC_CRT_CONTROL_ENABLE) ? 1 : 0;
>
> /* ensure we set the correct source register */
> if (info->pdata->fb_route != SM501_FB_CRT_PANEL) {
> ctrl |= SM501_DC_CRT_CONTROL_SEL;
> - writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
> + smc501_writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
> }
>
> break;
>
> case HEAD_PANEL:
> pd = info->pdata->fb_pnl;
> - ctrl = readl(info->regs + SM501_DC_PANEL_CONTROL);
> + ctrl = smc501_readl(info->regs + SM501_DC_PANEL_CONTROL);
> enable = (ctrl & SM501_DC_PANEL_CONTROL_EN) ? 1 : 0;
> break;
>
> @@ -1680,7 +1688,7 @@ static int sm501fb_init_fb(struct fb_info *fb,
>
> if (head == HEAD_CRT && info->pdata->fb_route == SM501_FB_CRT_PANEL) {
> ctrl &= ~SM501_DC_CRT_CONTROL_SEL;
> - writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
> + smc501_writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
> enable = 0;
> }
>
> @@ -2085,7 +2093,7 @@ static int sm501fb_suspend(struct platform_device *pdev, pm_message_t state)
> struct sm501fb_info *info = platform_get_drvdata(pdev);
>
> /* store crt control to resume with */
> - info->pm_crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
> + info->pm_crt_ctrl = smc501_readl(info->regs + SM501_DC_CRT_CONTROL);
>
> sm501fb_suspend_fb(info, HEAD_CRT);
> sm501fb_suspend_fb(info, HEAD_PANEL);
> @@ -2109,10 +2117,10 @@ static int sm501fb_resume(struct platform_device *pdev)
>
> /* restore the items we want to be saved for crt control */
>
> - crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
> + crt_ctrl = smc501_readl(info->regs + SM501_DC_CRT_CONTROL);
> crt_ctrl &= ~SM501_CRT_CTRL_SAVE;
> crt_ctrl |= info->pm_crt_ctrl & SM501_CRT_CTRL_SAVE;
> - writel(crt_ctrl, info->regs + SM501_DC_CRT_CONTROL);
> + smc501_writel(crt_ctrl, info->regs + SM501_DC_CRT_CONTROL);
>
> sm501fb_resume_fb(info, HEAD_CRT);
> sm501fb_resume_fb(info, HEAD_PANEL);
> diff --git a/include/linux/sm501.h b/include/linux/sm501.h
> index 214f932..02fde50 100644
> --- a/include/linux/sm501.h
> +++ b/include/linux/sm501.h
> @@ -172,3 +172,11 @@ struct sm501_platdata {
> struct sm501_platdata_gpio_i2c *gpio_i2c;
> unsigned int gpio_i2c_nr;
> };
> +
> +#if defined(CONFIG_PPC32)
> +#define smc501_readl(addr) ioread32be((addr))
> +#define smc501_writel(val, addr) iowrite32be((val), (addr))
> +#else
> +#define smc501_readl(addr) readl(addr)
> +#define smc501_writel(val, addr) writel(val, addr)
> +#endif
> --
> 1.7.4
>
More information about the Linuxppc-dev
mailing list