[PATCH v6 4/6] video, sm501: add OF binding to support SM501

[Heiko Schocher]

- add binding to OF, compatible name "smi,sm501"

Signed-off-by: Heiko Schocher <hs at denx.de>
Acked-by: Samuel Ortiz <sameo at linux.intel.com>
cc: Wolfram Sang <w.sang at pengutronix.de>
cc: Grant Likely <grant.likely at secretlab.ca>
cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
cc: linux-fbdev at vger.kernel.org
cc: devicetree-discuss at ozlabs.org
cc: Ben Dooks <ben at simtec.co.uk>
cc: Vincent Sanders <vince at simtec.co.uk>
cc: Samuel Ortiz <sameo at linux.intel.com>
cc: linux-kernel at vger.kernel.org
cc: Randy Dunlap <rdunlap at xenotime.net>
cc: Wolfgang Denk <wd at denx.de>
cc: Paul Mundt <lethal at linux-sh.org>
---
- changes since v1:
  add Ben Dooks, Vincent Sanders and Samuel Ortiz to cc, as suggested from
  Paul Mundt.
- changes since v2:
  add comments from Randy Dunlap:
  - move parameter documentation to Documentation/fb/sm501.txt
- changes since v3:
  - rebased against v2.6.38-rc2
  - split in 3 patches
    - of support patch
      - get rid of "#if defined(CONFIG_PPC_MPC52xx)" usage
        hide this in DTS, as Paul suggested.
    - i/o routine patch
    - edid support patch
- changes since v4
  replace remaining CONFIG_PPC_MPC52xx with CONFIG_OF, as
  it is no longer MPC52xx only.
- changes since v5
  free edid_data after its usage, as it is no longer needed,
  suggested from Paul Mundt. Also fall back to default if
  kmemdup(edid_data) fails.
- changes for v6:
  - repost complete patchserie
  - rebased against current head

 Documentation/powerpc/dts-bindings/sm501.txt |   34 +++++++++++++++++++++++++
 drivers/mfd/sm501.c                          |    8 +++++-
 drivers/video/sm501fb.c                      |   35 +++++++++++++++++++++++++-
 3 files changed, 75 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/sm501.txt

diff --git a/Documentation/powerpc/dts-bindings/sm501.txt b/Documentation/powerpc/dts-bindings/sm501.txt
new file mode 100644
index 0000000..7d319fb
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/sm501.txt
@@ -0,0 +1,34 @@
+* SM SM501
+
+The SM SM501 is a LCD controller, with proper hardware, it can also
+drive DVI monitors.
+
+Required properties:
+- compatible : should be "smi,sm501".
+- reg : contain two entries:
+    - First entry: System Configuration register
+    - Second entry: IO space (Display Controller register)
+- interrupts : SMI interrupt to the cpu should be described here.
+- interrupt-parent : the phandle for the interrupt controller that
+  services interrupts for this device.
+
+Optional properties:
+- mode : select a video mode:
+    <xres>x<yres>[-<bpp>][@<refresh>]
+- edid : verbatim EDID data block describing attached display.
+  Data from the detailed timing descriptor will be used to
+  program the display controller.
+- little-endian: availiable on big endian systems, to
+  set different foreign endian.
+- big-endian: availiable on little endian systems, to
+  set different foreign endian.
+
+Example for MPC5200:
+	display at 1,0 {
+		compatible = "smi,sm501";
+		reg = <1 0x00000000 0x00800000
+		       1 0x03e00000 0x00200000>;
+		interrupts = <1 1 3>;
+		mode = "640x480-32 at 60";
+		edid = [edid-data];
+	};
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 558d5f3..574f696 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1377,7 +1377,7 @@ static int __devinit sm501_init_dev(struct sm501_devdata *sm)
 			sm501_register_gpio(sm);
 	}
 
-	if (pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
+	if (pdata && pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
 		if (!sm501_gpio_isregistered(sm))
 			dev_err(sm->dev, "no gpio available for i2c gpio.\n");
 		else
@@ -1735,10 +1735,16 @@ static struct pci_driver sm501_pci_driver = {
 
 MODULE_ALIAS("platform:sm501");
 
+static struct of_device_id __devinitdata of_sm501_match_tbl[] = {
+	{ .compatible = "smi,sm501", },
+	{ /* end */ }
+};
+
 static struct platform_driver sm501_plat_driver = {
 	.driver		= {
 		.name	= "sm501",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_sm501_match_tbl,
 	},
 	.probe		= sm501_plat_probe,
 	.remove		= sm501_plat_remove,
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index f31252c..f275385 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -1729,6 +1729,15 @@ static int sm501fb_init_fb(struct fb_info *fb,
 		FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT |
 		FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
 
+#if defined(CONFIG_OF)
+#ifdef __BIG_ENDIAN
+	if (of_get_property(info->dev->parent->of_node, "little-endian", NULL))
+		fb->flags |= FBINFO_FOREIGN_ENDIAN;
+#else
+	if (of_get_property(info->dev->parent->of_node, "big-endian", NULL))
+		fb->flags |= FBINFO_FOREIGN_ENDIAN;
+#endif
+#endif
 	/* fixed data */
 
 	fb->fix.type		= FB_TYPE_PACKED_PIXELS;
@@ -1933,8 +1942,32 @@ static int __devinit sm501fb_probe(struct platform_device *pdev)
 	}
 
 	if (info->pdata == NULL) {
-		dev_info(dev, "using default configuration data\n");
+		int found = 0;
+#if defined(CONFIG_OF)
+		struct device_node *np = pdev->dev.parent->of_node;
+		const u8 *prop;
+		const char *cp;
+		int len;
+
 		info->pdata = &sm501fb_def_pdata;
+		if (np) {
+			/* Get EDID */
+			cp = of_get_property(np, "mode", &len);
+			if (cp)
+				strcpy(fb_mode, cp);
+			prop = of_get_property(np, "edid", &len);
+			if (prop && len == EDID_LENGTH) {
+				info->edid_data = kmemdup(prop, EDID_LENGTH,
+							  GFP_KERNEL);
+				if (info->edid_data)
+					found = 1;
+			}
+		}
+#endif
+		if (!found) {
+			dev_info(dev, "using default configuration data\n");
+			info->pdata = &sm501fb_def_pdata;
+		}
 	}
 
 	/* probe for the presence of each panel */
-- 
1.7.4