Mpc8315erdb openvpn segmentation fault

[Vasanth Ragavendran]

Thanks a ton Scott. Actually i was working with the same version of the
kernel on both the boards.
it was 2.6.29.6. neither i changed the u-boot. it was the same in both.
however i recompiled the kernel and i installed on both the boards and it
worked fine! :) thanks again for responding. however i've another question.
my filesystem in the board is non-persistent i.e. the files i create are
erased after i reboot i know the files are getting stored in RAM and i wish
to make them persistent. what do i need to do for this? should i create a
separate partition in the flash and load certain files into that partition?
or how should i make it persistent so that files stay beyond reboot! thanks
again! eagerly awaiting your response.


Scott Wood-2 wrote:
> 
> On Mon, 7 Mar 2011 03:09:27 -0800
> Vasanth Ragavendran <ragavendrapec at yahoo.co.in> wrote:
> 
>> 
>> i'm facing a problem. i've installed openvpn on mpc8315erdb board and
>> when i
>> give the command
>> 
>> openvpn --mktun --dev tap0 i get the error
>> 
>>  
>> 
>> [root at mpc8315erdb /]# openvpn --mktun --dev tap0
>> Sat Jan  1 01:04:21 2000 OpenVPNUnable to handle kernel paging request
>> for
>> data
>> at address 0x00000000
>>  2.0.9 ppc-rpm-lFaulting instruction address: 0xc90a208c
>> inux-gnu [SSL] [Oops: Kernel access of bad area, sig: 11 [#1]
>> MPC831x RDB
>> Modules linked in: tun
>> **bleep**: c90a208c LR: c90a2068 CTR: c0288e58
>> REGS: c294fd80 TRAP: 0300   Not tainted  (2.6.29.6)
>> MSR: 00009032 <EE,ME,IR,DR>  CR: 24002424  XER: 20000000
>> DAR: 00000000, DSISR: 20000000
>> TASK = c70b6440[1635] 'openvpn' THREAD: c294e000
>> GPR00: 00000001 c294fe30 c70b6440 c03ebcf4 bfafa0d4 0000001c c294fe58
>> 0fd8dc58
>> GPR08: 00000000 00000001 ffffffe7 00000000 84002428 100787e0 07ff9000
>> 00000004
>> GPR16: 00000000 00000000 bfafa930 00010000 00010000 ffffffff 00000005
>> 3b9aca00
>> GPR24: c7023d20 c294fe3c bfafa0b8 c653e6e0 00000000 c040baf4 bfafa0b8
>> 800454ca
>> Call Trace:
>> [c294fe30] [c90a2068] 0xc90a2068 (unreliable)
>> [c294fe90] [c008054c] 0xc008054c
>> [c294fea0] [c00809c4] 0xc00809c4
>> [c294ff10] [c0080c9c] 0xc0080c9c
>> [c294ff40] [c001141c] 0xc001141c
>> --- Exception: c01 at 0xfce8268
>>     LR = 0xfd6bdec
>> Instruction dump:
>> 4bfffecc 9b81001b 480008ed 3d20c90a 38000001 8129306c 81620308 2f890000
>> 830201a4 83ab0014 817d0124 419e0014 <800b0000> 7c090010 7c000110 7c0000d0
>> LZO] [EPOLL] bui---[ end trace 54eee2a93ccf53d1 ]---
>> lt on Mar  2 2011
>> Sat Jan  1 01:04:21 2000 IMPORTANT: OpenVPN's default port number is now
>> 1194, b
>> ased on an official port number assignment by IANA.  OpenVPN 2.0-beta16
>> and
>> earl
>> ier used 5000 as the default port.
>> Sat Jan  1 01:04:21 2000 ******* WARNING *******: all encryption and
>> authenticat
>> ion features disabled -- all data will be tunnelled as cleartext
>> Segmentation fault
>> 
>>  
>> 
>> Some one plz help me out! wat does this mean? Coz with the same kernel
>> image
>> and the same settings  i'm able to successfully run the above command on
>> another mpc8315erdb board. but it fails on one of the board! any ideas
>> would
>> be of great help to me!! plz!
> 
> Please turn on CONFIG_KALLSYMS, so that symbols will be reported in the
> crash dump, and let us know which kernel you're using.
> 
> Are the other boards where it does not fail running the same kernel?  Same
> userspace?  Same U-Boot?  Anything else different?
> 
> -Scott
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
> 
> 

-- 
View this message in context: http://old.nabble.com/Mpc8315erdb-openvpn-segmentation-fault-tp31086738p31094242.html
Sent from the linuxppc-dev mailing list archive at Nabble.com.