[PATCH] powerpc/85xx: disable timebase synchronization under the hypervisor

[Segher Boessenkool]

(context put back:)

>> But does that mean that a guest should never be allowed to modify a 
>> virtualized
>> timebase register, even if the hypervisor can support it?
>
> The book3e mtspr writeup doesn't appear to specify the behavior when
> writing to a read-only SPR, so perhaps you could argue that something 
> other
> than a no-op is implementation-specific behavior.

>> v2.06 III-E 9.2.1:
>> "Writing the Time Base is hypervisor privileged."
>>
>> v2.06 III-E 2.1:
>> "If a hypervisor-privileged register is accessed in the guest 
>> supervisor
>> state (MSR[GS PR] = 0b10), an Embedded Hypervisor Privilege exception
>> occurs."
>>
>> (v2.06 III-E 5.4.1, the big SPR table, also shows the TB regs (for 
>> writing,
>> i.e. 284 and 285) to be hypervisor privileged.  Consistency, hurray 
>> :-) )
>
> To me, all this means that a guest cannot write to the actual timebase
> register.

It also means that the hypervisor gets a trap when a guest tries to do 
this.

>   I'm not interpreting this to mean that a hypervisor can't
> virtualize the timebase and allow a guest to read/write a virtual 
> timebase
> register, so that it thinks it's writing to the real hardware timebase 
> register.

Yes, a hypervisor can do this.  The behaviour of the hardware is not
implementation-specific (modulo bugs ;-) ); when a guest tries to write
to the timebase, the hypervisor gets a trap.  The hypervisor can then
do whatever it wants with it.


Segher