[PATCH 1/2] powerpc/86xx: enable the framebuffer console on the MPC8610 HPCD

[Timur Tabi]

Enable framebuffer console support by default in the defconfig on the
Freescale MPC8610 HPCD reference board.  This allows the boot messages to
be shown on the video display.

Signed-off-by: Timur Tabi <timur at freescale.com>
---
 arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index 036bfb2..0db9ba0 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -89,6 +89,11 @@ CONFIG_I2C_MPC=y
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_FB_FSL_DIU=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_MIXER_OSS=y
-- 
1.7.3.4