[PATCH] powerpc/85xx:DTS: Fix tbi node location for Px020RDB

Aggrwal Poonam-B10812 B10812 at freescale.com
Thu Jun 23 17:24:06 EST 2011



> -----Original Message-----
> From: linuxppc-dev-bounces+poonam.aggrwal=freescale.com at lists.ozlabs.org
> [mailto:linuxppc-dev-
> bounces+poonam.aggrwal=freescale.com at lists.ozlabs.org] On Behalf Of Kumar
> Gala
> Sent: Wednesday, June 22, 2011 5:04 PM
> To: Kushwaha Prabhakar-B32579
> Cc: meet2prabhu at gmail.com; devicetree-discuss at lists.ozlabs.org; linuxppc-
> dev at lists.ozlabs.org
> Subject: Re: [PATCH] powerpc/85xx:DTS: Fix tbi node location for Px020RDB
> 
> 
> On Jun 7, 2011, at 9:49 PM, Prabhakar Kushwaha wrote:
> 
> > ten-bit interface (TBI) module is part of SoC not board.
> >
> > Move tbi entries from board related dts files to Si dts.
> >
> > Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
> > ---
> > Based upon
> http://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git (branch
> next)
> >
> > arch/powerpc/boot/dts/p1020rdb.dts            |    9 ---------
> > arch/powerpc/boot/dts/p1020rdb_camp_core0.dts |    8 --------
> > arch/powerpc/boot/dts/p1020si.dtsi            |    6 +++++-
> > arch/powerpc/boot/dts/p2020rdb.dts            |    8 --------
> > arch/powerpc/boot/dts/p2020rdb_camp_core0.dts |    8 --------
> > arch/powerpc/boot/dts/p2020si.dtsi            |    6 +++++-
> > 6 files changed, 10 insertions(+), 35 deletions(-)
> >
> > diff --git a/arch/powerpc/boot/dts/p1020rdb.dts
> b/arch/powerpc/boot/dts/p1020rdb.dts
> > index d6a8ae4..a4e5d6c 100644
> > --- a/arch/powerpc/boot/dts/p1020rdb.dts
> > +++ b/arch/powerpc/boot/dts/p1020rdb.dts
> > @@ -211,14 +211,6 @@
> > 			};
> > 		};
> >
> > -		mdio at 25000 {
> > -
> > -			tbi0: tbi-phy at 11 {
> > -				reg = <0x11>;
> > -				device_type = "tbi-phy";
> > -			};
> > -		};
> > -
> > 		enet0: ethernet at b0000 {
> > 			fixed-link = <1 1 1000 0 0>;
> > 			phy-connection-type = "rgmii-id";
> > @@ -227,7 +219,6 @@
> >
> > 		enet1: ethernet at b1000 {
> > 			phy-handle = <&phy0>;
> > -			tbi-handle = <&tbi0>;
> > 			phy-connection-type = "sgmii";
> >
> > 		};
> 
> I'm not sure we should do this.  The phy address we pick is board
> specific so it should NOT be in .dtsi
The TBI phy and it's address is internal to SOC.

Regards
Poonam
> 
> - k
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev




More information about the Linuxppc-dev mailing list