[PATCH] powerpc/85xx:DTS: Fix tbi node location for Px020RDB

Kumar Gala galak at kernel.crashing.org
Wed Jun 22 21:34:11 EST 2011


On Jun 7, 2011, at 9:49 PM, Prabhakar Kushwaha wrote:

> ten-bit interface (TBI) module is part of SoC not board.
> 
> Move tbi entries from board related dts files to Si dts.
> 
> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
> ---
> Based upon http://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git (branch next)
> 
> arch/powerpc/boot/dts/p1020rdb.dts            |    9 ---------
> arch/powerpc/boot/dts/p1020rdb_camp_core0.dts |    8 --------
> arch/powerpc/boot/dts/p1020si.dtsi            |    6 +++++-
> arch/powerpc/boot/dts/p2020rdb.dts            |    8 --------
> arch/powerpc/boot/dts/p2020rdb_camp_core0.dts |    8 --------
> arch/powerpc/boot/dts/p2020si.dtsi            |    6 +++++-
> 6 files changed, 10 insertions(+), 35 deletions(-)
> 
> diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
> index d6a8ae4..a4e5d6c 100644
> --- a/arch/powerpc/boot/dts/p1020rdb.dts
> +++ b/arch/powerpc/boot/dts/p1020rdb.dts
> @@ -211,14 +211,6 @@
> 			};
> 		};
> 
> -		mdio at 25000 {
> -
> -			tbi0: tbi-phy at 11 {
> -				reg = <0x11>;
> -				device_type = "tbi-phy";
> -			};
> -		};
> -
> 		enet0: ethernet at b0000 {
> 			fixed-link = <1 1 1000 0 0>;
> 			phy-connection-type = "rgmii-id";
> @@ -227,7 +219,6 @@
> 
> 		enet1: ethernet at b1000 {
> 			phy-handle = <&phy0>;
> -			tbi-handle = <&tbi0>;
> 			phy-connection-type = "sgmii";
> 
> 		};

I'm not sure we should do this.  The phy address we pick is board specific so it should NOT be in .dtsi

- k


More information about the Linuxppc-dev mailing list