[PATCH 3/5] drivers/amba: create devices from device tree
Grant Likely
grant.likely at secretlab.ca
Wed Jun 22 04:45:03 EST 2011
Add a function to create amba_devices (i.e. primecell peripherals)
from device tree nodes. The device tree scanning is done by the
of_platform_populate() function which can call of_amba_device_create
based on a match table entry.
Nodes with a "arm,primecell-periphid" property can override the h/w
peripheral id value.
Based on the original work by Jeremy Kerr.
Signed-off-by: Jeremy Kerr <jeremy.kerr at canonical.com>
Acked-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Rob Herring <rob.herring at calxeda.com>
Reviewed-by: Arnd Bergmann <arnd at arndb.de>
[grant.likely: add Jeremy's original s-o-b line, changes from review
comments, and moved all code to drivers/of/platform.c]
Signed-off-by: Grant Likely <grant.likely at secretlab.ca>
---
.../devicetree/bindings/arm/primecell.txt | 21 ++++++
drivers/of/platform.c | 71 ++++++++++++++++++++
2 files changed, 92 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/primecell.txt
diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt
new file mode 100644
index 0000000..1d5d7a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/primecell.txt
@@ -0,0 +1,21 @@
+* ARM Primecell Peripherals
+
+ARM, Ltd. Primecell peripherals have a standard id register that can be used to
+identify the peripheral type, vendor, and revision. This value can be used for
+driver matching.
+
+Required properties:
+
+- compatible : should be a specific value for peripheral and "arm,primecell"
+
+Optional properties:
+
+- arm,primecell-periphid : Value to override the h/w value with
+
+Example:
+
+serial at fff36000 {
+ compatible = "arm,pl011", "arm,primecell";
+ arm,primecell-periphid = <0x00341011>;
+};
+
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 1f4a5d3..4192ddc 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -13,6 +13,7 @@
*/
#include <linux/errno.h>
#include <linux/module.h>
+#include <linux/amba/bus.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
@@ -217,6 +218,71 @@ struct platform_device *of_platform_device_create(struct device_node *np,
}
EXPORT_SYMBOL(of_platform_device_create);
+#ifdef CONFIG_ARM_AMBA
+static struct amba_device *of_amba_device_create(struct device_node *node,
+ const char *bus_id,
+ void *platform_data,
+ struct device *parent)
+{
+ struct amba_device *dev;
+ const void *prop;
+ int i, ret;
+
+ pr_debug("Creating amba device %s\n", node->full_name);
+
+ if (!of_device_is_available(node))
+ return NULL;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ /* setup generic device info */
+ dev->dev.coherent_dma_mask = ~0;
+ dev->dev.of_node = of_node_get(node);
+ dev->dev.parent = parent;
+ dev->dev.platform_data = platform_data;
+ if (bus_id)
+ dev_set_name(&dev->dev, "%s", bus_id);
+ else
+ of_device_make_bus_id(&dev->dev);
+
+ /* setup amba-specific device info */
+ dev->dma_mask = ~0;
+
+ /* Allow the HW Peripheral ID to be overridden */
+ prop = of_get_property(node, "arm,primecell-periphid", NULL);
+ if (prop)
+ dev->periphid = of_read_ulong(prop, 1);
+
+ /* Decode the IRQs and address ranges */
+ for (i = 0; i < AMBA_NR_IRQS; i++)
+ dev->irq[i] = irq_of_parse_and_map(node, i);
+
+ ret = of_address_to_resource(node, 0, &dev->res);
+ if (ret)
+ goto err_free;
+
+ ret = amba_device_register(dev, &iomem_resource);
+ if (ret)
+ goto err_free;
+
+ return dev;
+
+err_free:
+ kfree(dev);
+ return NULL;
+}
+#else /* CONFIG_ARM_AMBA */
+static struct amba_device *of_amba_device_create(struct device_node *node,
+ const char *bus_id,
+ void *platform_data,
+ struct device *parent)
+{
+ return NULL;
+}
+#endif /* CONFIG_ARM_AMBA */
+
/**
* of_platform_bus_create() - Create a device for a node and its children.
* @bus: device node of the bus to instantiate
@@ -242,6 +308,11 @@ static int of_platform_bus_create(struct device_node *bus,
return 0;
}
+ if (of_device_is_compatible(bus, "arm,primecell")) {
+ of_amba_device_create(bus, NULL, NULL, parent);
+ return 0;
+ }
+
dev = of_platform_device_create(bus, NULL, parent);
if (!dev || !of_match_node(matches, bus))
return 0;
More information about the Linuxppc-dev
mailing list