Hooking up SM501 on TQM5200 (MPC5200) board via device tree?

Josh Triplett josh at joshtriplett.org
Wed Jun 1 15:07:01 EST 2011


We have a TQM5200 board, which has GPIO lines hooked up to an SM501.
I've managed to come up with the following patch to the tqm5200 device
tree, which manages to convince the sm501 driver to attach an sm501-fb:

--- a/arch/powerpc/boot/dts/tqm5200.dts  2009-11-23 03:13:27.000000000 -0800
+++ b/arch/powerpc/boot/dts/tqm5200.dts  2011-05-31 22:00:28.000580627 -0700
@@ -177,7 +177,8 @@
                compatible = "fsl,mpc5200-lpb","simple-bus";
                #address-cells = <2>;
                #size-cells = <1>;
-               ranges = <0 0 0xfc000000 0x02000000>;
+               ranges = <0 0 0xfc000000 0x02000000
+                         1 0 0xe0000000 0x04000000>;
 
                flash at 0,0 {
                        compatible = "cfi-flash";
@@ -187,6 +188,13 @@
                        #size-cells = <1>;
                        #address-cells = <1>;
                };
+
+               display at 1,0 {
+                       compatible = "smi,sm501";
+                       reg = <1 0x00000000 0x00800000
+                              1 0x03e00000 0x00200000>;
+                       interrupts = <1 1 3>;
+               };
        };
 
        pci at f0000d00 {


However, this doesn't hook up the sm501-gpio bits.  Reading the sm501
driver carefully, it looks like it only hooks up sm501-gpio if it has
platform_data available which sets some flags and other information.
So, if I understand correctly, hooking up sm501-gpio would require
adding functionality the driver to get the GPIO information from the
device tree in preference to the platform_data, if available, and fall
back to the platform_data for existing users?

What should the necessary device tree properties look like to replace
sm501_initdata?

- Josh Triplett


More information about the Linuxppc-dev mailing list