[PATCH v2] mtd: eLBC NAND: update ecc_stats.corrected when lteccr available

Michael Hench michaelhench at gmail.com
Wed Jul 27 04:59:25 EST 2011


update ecc_stats.corrected if LTECCR register is available.

v2: kernel standard C formatting

Signed-off-by: Michael Hench <MichaelHench at gmail.com>
---
diff -purN orig/drivers/mtd/nand/fsl_elbc_nand.c
linux-3.0/drivers/mtd/nand/fsl_elbc_nand.c
--- orig/drivers/mtd/nand/fsl_elbc_nand.c	2011-07-25 14:50:56.838326055 -0500
+++ linux-3.0/drivers/mtd/nand/fsl_elbc_nand.c	2011-07-25
14:48:35.680940052 -0500
@@ -256,6 +256,25 @@ static int fsl_elbc_run_command(struct m
 		return -EIO;
 	}

+	if (chip->ecc.mode != NAND_ECC_HW)
+		return 0;
+
+	if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) {
+		uint32_t lteccr = in_be32(&lbc->lteccr);
+		/*
+		 * if command was a full page read and the ELBC
+		 * has the LTECCR register, then bits 12-15 (ppc order) of
+		 * LTECCR indicate which 512 byte sub-pages had corrected errors.
+		 * bits 28-31 are uncorrectable errors, marked elsewhere.
+		 * for small page nand only 1 bit is used.
+		 * if the ELBC doesn't have the lteccr register it reads 0
+		 */
+		if(lteccr & 0x000F000F)
+			out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */
+		if(lteccr & 0x000F0000)
+			mtd->ecc_stats.corrected++;
+	}
+
 	return 0;
 }

--


More information about the Linuxppc-dev mailing list