[PATCH 1/1] Remove obsolete HCU4 board
Niklaus Giger
niklaus.giger at member.fsf.org
Fri Jul 22 20:41:04 EST 2011
Signed-off-by: Niklaus Giger <niklaus.giger at member.fsf.org>
---
arch/powerpc/boot/dts/hcu4.dts | 168
-------------------------------
arch/powerpc/configs/40x/hcu4_defconfig | 80 ---------------
arch/powerpc/platforms/40x/hcu4.c | 61 -----------
3 files changed, 0 insertions(+), 309 deletions(-)
delete mode 100644 arch/powerpc/boot/dts/hcu4.dts
delete mode 100644 arch/powerpc/configs/40x/hcu4_defconfig
delete mode 100644 arch/powerpc/platforms/40x/hcu4.c
diff --git a/arch/powerpc/boot/dts/hcu4.dts b/arch/powerpc/boot/dts/hcu4.dts
deleted file mode 100644
index 7988598..0000000
--- a/arch/powerpc/boot/dts/hcu4.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
-* Device Tree Source for Netstal Maschinen HCU4
-* based on the IBM Walnut
-*
-* Copyright 2008
-* Niklaus Giger <niklaus.giger at member.fsf.org>
-*
-* Copyright 2007 IBM Corp.
-* Josh Boyer <jwboyer at linux.vnet.ibm.com>
-*
-* This file is licensed under the terms of the GNU General Public
-* License version 2. This program is licensed "as is" without
-* any warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-/ {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- model = "netstal,hcu4";
- compatible = "netstal,hcu4";
- dcr-parent = <0x1>;
-
- aliases {
- ethernet0 = "/plb/opb/ethernet at ef600800";
- serial0 = "/plb/opb/serial at ef600300";
- };
-
- cpus {
- #address-cells = <0x1>;
- #size-cells = <0x0>;
-
- cpu at 0 {
- device_type = "cpu";
- model = "PowerPC,405GPr";
- reg = <0x0>;
- clock-frequency = <0>; /* Filled in by U-Boot */
- timebase-frequency = <0x0>; /* Filled in by U-Boot */
- i-cache-line-size = <0x20>;
- d-cache-line-size = <0x20>;
- i-cache-size = <0x4000>;
- d-cache-size = <0x4000>;
- dcr-controller;
- dcr-access-method = "native";
- linux,phandle = <0x1>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; /* Filled in by U-Boot */
- };
-
- UIC0: interrupt-controller {
- compatible = "ibm,uic";
- interrupt-controller;
- cell-index = <0x0>;
- dcr-reg = <0xc0 0x9>;
- #address-cells = <0x0>;
- #size-cells = <0x0>;
- #interrupt-cells = <0x2>;
- linux,phandle = <0x2>;
- };
-
- plb {
- compatible = "ibm,plb3";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges;
- clock-frequency = <0x0>; /* Filled in by U-Boot */
-
- SDRAM0: memory-controller {
- compatible = "ibm,sdram-405gp";
- dcr-reg = <0x10 0x2>;
- };
-
- MAL: mcmal {
- compatible = "ibm,mcmal-405gp", "ibm,mcmal";
- dcr-reg = <0x180 0x62>;
- num-tx-chans = <0x1>;
- num-rx-chans = <0x1>;
- interrupt-parent = <0x2>;
- interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>;
- linux,phandle = <0x3>;
- };
-
- POB0: opb {
- compatible = "ibm,opb-405gp", "ibm,opb";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges = <0xef600000 0xef600000 0xa00000>;
- dcr-reg = <0xa0 0x5>;
- clock-frequency = <0x0>; /* Filled in by U-Boot */
-
- UART0: serial at ef600300 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0xef600300 0x8>;
- virtual-reg = <0xef600300>;
- clock-frequency = <0x0>;/* Filled in by U-Boot */
- current-speed = <0>; /* Filled in by U-Boot */
- interrupt-parent = <0x2>;
- interrupts = <0x0 0x4>;
- };
-
- IIC: i2c at ef600500 {
- compatible = "ibm,iic-405gp", "ibm,iic";
- reg = <0xef600500 0x11>;
- interrupt-parent = <0x2>;
- interrupts = <0x2 0x4>;
- };
-
- GPIO: gpio at ef600700 {
- compatible = "ibm,gpio-405gp";
- reg = <0xef600700 0x20>;
- };
-
- EMAC: ethernet at ef600800 {
- device_type = "network";
- compatible = "ibm,emac-405gp", "ibm,emac";
- interrupt-parent = <0x2>;
- interrupts = <0xf 0x4 0x9 0x4>;
- local-mac-address = [00 00 00 00 00 00];
- reg = <0xef600800 0x70>;
- mal-device = <0x3>;
- mal-tx-channel = <0x0>;
- mal-rx-channel = <0x0>;
- cell-index = <0x0>;
- max-frame-size = <0x5dc>;
- rx-fifo-size = <0x1000>;
- tx-fifo-size = <0x800>;
- phy-mode = "rmii";
- phy-map = <0x1>;
- };
- };
-
- EBC0: ebc {
- compatible = "ibm,ebc-405gp", "ibm,ebc";
- dcr-reg = <0x12 0x2>;
- #address-cells = <0x2>;
- #size-cells = <0x1>;
- clock-frequency = <0x0>; /* Filled in by U-Boot */
-
- sram at 0,0 {
- reg = <0x0 0x0 0x80000>;
- };
-
- flash at 0,80000 {
- compatible = "jedec-flash";
- bank-width = <0x1>;
- reg = <0x0 0x80000 0x80000>;
- #address-cells = <0x1>;
- #size-cells = <0x1>;
-
- partition at 0 {
- label = "OpenBIOS";
- reg = <0x0 0x80000>;
- read-only;
- };
- };
- };
- };
-
- chosen {
- linux,stdout-path = "/plb/opb/serial at ef600300";
- };
-};
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig
b/arch/powerpc/configs/40x/hcu4_defconfig
deleted file mode 100644
index ebeb4ac..0000000
--- a/arch/powerpc/configs/40x/hcu4_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_40x=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_HCU4=y
-# CONFIG_WALNUT is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=35000
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/platforms/40x/hcu4.c
b/arch/powerpc/platforms/40x/hcu4.c
deleted file mode 100644
index 60b2afe..0000000
--- a/arch/powerpc/platforms/40x/hcu4.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Architecture- / platform-specific boot-time initialization code for
- * IBM PowerPC 4xx based boards. Adapted from original
- * code by Gary Thomas, Cort Dougan <cort at fsmlabs.com>, and Dan Malek
- * <dan at net4x.com>.
- *
- * Copyright(c) 1999-2000 Grant Erickson <grant at lcse.umn.edu>
- *
- * Rewritten and ported to the merged powerpc tree:
- * Copyright 2007 IBM Corporation
- * Josh Boyer <jwboyer at linux.vnet.ibm.com>
- *
- * 2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id hcu4_of_bus[] = {
- { .compatible = "ibm,plb3", },
- { .compatible = "ibm,opb", },
- { .compatible = "ibm,ebc", },
- {},
-};
-
-static int __init hcu4_device_probe(void)
-{
- of_platform_bus_probe(NULL, hcu4_of_bus, NULL);
- return 0;
-}
-machine_device_initcall(hcu4, hcu4_device_probe);
-
-static int __init hcu4_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "netstal,hcu4"))
- return 0;
-
- return 1;
-}
-
-define_machine(hcu4) {
- .name = "HCU4",
- .probe = hcu4_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc4xx_reset_system,
- .calibrate_decr = generic_calibrate_decr,
-};
--
1.7.5.4
More information about the Linuxppc-dev
mailing list