[PATCH] powerpc/44x: Use correct phy-address dt nodes on taishan.dts
Stefan Roese
sr at denx.de
Tue Jul 12 21:25:54 EST 2011
Taishan (440GX) has the first PHY (EMAC2) mapped at PHY address 1
and the 2nd PHY (EMAC3) at PHY address 3. Use "phy-address" to
correctly describe this instead of "phy-map".
Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Josh Boyer <jwboyer at linux.vnet.ibm.com>
---
arch/powerpc/boot/dts/taishan.dts | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts
index 058438f..1657ad0 100644
--- a/arch/powerpc/boot/dts/taishan.dts
+++ b/arch/powerpc/boot/dts/taishan.dts
@@ -337,7 +337,7 @@
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <0x00000001>;
+ phy-address = <1>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
zmii-device = <&ZMII0>;
@@ -361,7 +361,7 @@
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <0x00000003>;
+ phy-address = <3>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
zmii-device = <&ZMII0>;
--
1.7.6
More information about the Linuxppc-dev
mailing list