{PATCH] Firmware update using the update_flash -f <filename> results to soft lockup BUG

[divya]

Hi ,

Problem Description:
Firmware update using the update_flash -f<filename>  results to soft lockup
BUG
FLASH: preparing saved firmware image for flash
FLASH: flash image is 50141296 bytes
FLASH: performing flash and reboot
FLASH: this will take several minutes.  Do not power off!
BUG: soft lockup - CPU#1 stuck for 67s! [events/1:36]

Steps to reproduce:
1. Check the firmware information on the machine (using ASM or lsmcode)
2. Update the system firmware with the update_flash command
update_flash -f 01FL350_039_038.img
info: Temporary side will be updated with a newer or
identical image

Projected Flash Update Results:
Current T Image: FL350_039
Current P Image: FL350_039
New T Image:     FL350_039
New P Image:     FL350_039
Flash image ready...rebooting the system...

Broadcast message from root at abc
(/dev/hvc0) at 5:25 ...

The system is going down for reboot NOW!
[root at abc /]# Stopping rhsmcertd[  OK  ]
Stopping atd: [  OK  ]
Stopping cups: [  OK  ]
Stopping abrt daemon: [  OK  ]
Stopping sshd: [  OK  ]
Shutting down postfix: [  OK  ]
Stopping rtas_errd (platform error handling) daemon: [  OK  ]
Stopping crond: [  OK  ]
Stopping automount: [  OK  ]
Stopping HAL daemon: [  OK  ]
Stopping iprdump: [  OK  ]
Killing mdmonitor: [  OK  ]]
Stopping system message bus: [  OK  ]
Stopping rpcbind: [  OK  ]
Stopping auditd: [  OK  ]
Shutting down interface eth0:  [  OK  ]
Shutting down loopback interface:  [  OK  ]
ip6tables: Flushing firewall rules: [  OK  ]
ip6tables: Setting chains to policy ACCEPT: filter [  OK  ]
ip6tables: Unloading modules: [  OK  ]
iptables: Flushing firewall rules: [  OK  ]
iptables: Setting chains to policy ACCEPT: filter [  OK  ]
iptables: Unloading modules: [  OK  ]
Sending all processes the TERM signal... [  OK  ]
Sending all processes the KILL signal... [  OK  ]
Saving random seed:  [  OK  ]
Turning off swap:  [  OK  ]
Turning off quotas:  [  OK  ]
Unmounting pipe file systems:  [  OK  ]
Unmounting file systems:  [  OK  ]
init: Re-executing /sbin/init
Please stand by while rebooting the system...
Restarting system.
FLASH: preparing saved firmware image for flash
FLASH: flash image is 50141296 bytes
FLASH: performing flash and reboot
FLASH: this will take several minutes.  Do not power off!
BUG: soft lockup - CPU#1 stuck for 67s! [events/1:36]

This is solved by the following patch

--- arch/powerpc/kernel/setup-common.c.orig	2011-07-01 22:41:12.952507971 -0400
+++ arch/powerpc/kernel/setup-common.c	2011-07-01 22:48:31.182507915 -0400
@@ -109,11 +109,12 @@ void machine_shutdown(void)
  void machine_restart(char *cmd)
  {
  	machine_shutdown();
-	if (ppc_md.restart)
-		ppc_md.restart(cmd);
  #ifdef CONFIG_SMP
-	smp_send_stop();
+        smp_send_stop();
  #endif
+	if (ppc_md.restart)
+		ppc_md.restart(cmd);
+	
  	printk(KERN_EMERG "System Halted, OK to turn off power\n");
  	local_irq_disable();
  	while (1) ;

Thanks
Divya