[PATCH] mtd: eLBC NAND: remove bogus ECC read-back

Scott Wood scottwood at freescale.com
Wed Jul 6 06:15:25 EST 2011


On Tue, 5 Jul 2011 15:59:57 -0400
"Matthew L. Creech" <mlcreech at gmail.com> wrote:

> From: Mike Hench <mhench at elutions.com>
> 
> The eLBC NAND driver currently follows up each program/write operation with a
> read-back of the page, in order to [ostensibly] fill in ECC data for the
> caller. However, the page address used for this read is always -1, so the read
> will never work correctly.  Remove this useless (and potentially problematic)
> block of code.
> 
> Signed-off-by: Matthew L. Creech <mlcreech at gmail.com>
> ---
>  drivers/mtd/nand/fsl_elbc_nand.c |   17 -----------------
>  1 files changed, 0 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
> index 0bb254c..050a2fc 100644
> --- a/drivers/mtd/nand/fsl_elbc_nand.c
> +++ b/drivers/mtd/nand/fsl_elbc_nand.c
> @@ -455,23 +455,6 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
>  
>  		fsl_elbc_run_command(mtd);
>  
> -		/* Read back the page in order to fill in the ECC for the
> -		 * caller.  Is this really needed?
> -		 */
> -		if (full_page && elbc_fcm_ctrl->oob_poi) {
> -			out_be32(&lbc->fbcr, 3);
> -			set_addr(mtd, 6, page_addr, 1);
> -
> -			elbc_fcm_ctrl->read_bytes = mtd->writesize + 9;
> -
> -			fsl_elbc_do_read(chip, 1);
> -			fsl_elbc_run_command(mtd);
> -
> -			memcpy_fromio(elbc_fcm_ctrl->oob_poi + 6,
> -				&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], 3);
> -			elbc_fcm_ctrl->index += 3;
> -		}
> -
>  		elbc_fcm_ctrl->oob_poi = NULL;
>  		return;
>  	}

All references to elbc_fcm_ctrl->oob_poi (not chip->oob_poi) can be removed
now.

-Scott



More information about the Linuxppc-dev mailing list