[PATCH] gianfar: Fall back to software tcp/udp checksum on older controllers

Anton Vorontsov cbouatmailru at gmail.com
Thu Jan 27 20:51:00 EST 2011


Hello Alex,

On Thu, Jan 27, 2011 at 12:14:21AM -0800, Alex Dubov wrote:
> As specified by errata eTSEC49 of MPC8548 and errata eTSEC12 of MPC83xx,
> older revisions of gianfar controllers will be unable to calculate a TCP/UDP
> packet checksum for some aligments of the appropriate FCB. This patch checks
> for FCB alignment on such controllers and falls back to software checksumming
> if the aligment is known to be bad.
> 
> Signed-off-by: Alex Dubov <oakad at yahoo.com>
> ---
> This is my, somewhat different approach to Matthew Creech proposed solution.
> 
>  drivers/net/gianfar.c |   21 +++++++++++++++++++--
>  drivers/net/gianfar.h |    1 +
>  2 files changed, 20 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
> index 5ed8f9f..b4f0e99 100644
> --- a/drivers/net/gianfar.c
> +++ b/drivers/net/gianfar.c
> @@ -950,6 +950,11 @@ static void gfar_detect_errata(struct gfar_private *priv)
>  			(pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
>  		priv->errata |= GFAR_ERRATA_A002;
>  
> +	/* MPC8313 Rev < 2.0, MPC8548 rev 2.0 */
> +	if ((pvr == 0x80850010 && mod == 0x80b0 && rev < 0x0020)
> +	    || (pvr == 0x80210020 && mod == 0x8030 && rev == 0x0020))

Please indent it like the above: with two tabs. This is
to keep things consistent.

> +		priv->errata |= GFAR_ERRATA_12;
> +
>  	if (priv->errata)
>  		dev_info(dev, "enabled errata workarounds, flags: 0x%x\n",
>  			 priv->errata);
> @@ -2156,8 +2161,20 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
>  	/* Set up checksumming */
>  	if (CHECKSUM_PARTIAL == skb->ip_summed) {
>  		fcb = gfar_add_fcb(skb);
> -		lstatus |= BD_LFLAG(TXBD_TOE);
> -		gfar_tx_checksum(skb, fcb);
> +		switch (unlikely(gfar_has_errata(priv, GFAR_ERRATA_12))
> +			? 1 : 0) {

The switch construction is quite bizarre. ;-) Why not

if (gfar_has_errata() && (ulong)fcb % 0x20 > 18) {
	csum_help();
} else {
	lstatus |=...
	tx_csum();
}

?

Thanks,

> +		case 1:
> +			/* as specified by errata */
> +			if (((unsigned long)fcb % 0x20) > 0x18) { 
> +				__skb_pull(skb, GMAC_FCB_LEN);
> +				skb_checksum_help(skb);
> +				break;
> +			}
> +			/* otherwise, fall through */
> +		default:
> +			lstatus |= BD_LFLAG(TXBD_TOE);
> +			gfar_tx_checksum(skb, fcb);
> +		}
>  	}

-- 
Anton Vorontsov
Email: cbouatmailru at gmail.com


More information about the Linuxppc-dev mailing list