2.6.37-git17 virtual IO boot failure

[Nishanth Aravamudan]

On 19.01.2011 [15:06:20 +1100], Benjamin Herrenschmidt wrote:
> On Tue, 2011-01-18 at 14:47 -0800, Nishanth Aravamudan wrote:
> > On 18.01.2011 [12:31:52 +1100], Anton Blanchard wrote:
> > > Hi,
> > > 
> > > I was testing 2.6.37-git17 on a POWER7 with virtual IO and hit this:
> > > 
> > > Trying to unpack rootfs image as initramfs...
> > > Freeing initrd memory: 7446k freed
> > > vio 30000000: Warning: IOMMU dma not supported: mask
> > > 0xffffffffffffffff, table unavailable
> > > vio 4000: Warning: IOMMU dma not supported: mask 0xffffffffffffffff,
> > > table unavailable
> > > vio 4001: Warning: IOMMU dma not supported: mask 0xffffffffffffffff,
> > > table unavailable
> > > vio 4002: Warning: IOMMU dma not supported: mask 0xffffffffffffffff,
> > > table unavailable
> > > vio 4004: Warning: IOMMU dma not supported: mask 0xffffffffffffffff,
> > > table unavailable
> > > audit: initializing netlink socket (disabled)
> > > 
> > > Haven't had a chance to look closer yet.
> 
> Well, this causes messages for vdevices that don't do DMA at all (such
> as vterm etc...) and don't have the necessary properties. However, it
> didn't -break- anything for me in my tests so far, just spurrious
> messages. Not sure what's up with Anton's setup. Anton, can you hack the
> printk to display the OF path to the device so we see what devices are
> complaining ? It could be a different issue that prevents booting.

Is this what you were looking for?

vio 30000000: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable
vio 30000000: Path: /vdevice/vty at 30000000
vio 4000: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable
vio 4000: Path: /vdevice/IBM,sp at 4000
vio 4001: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable
vio 4001: Path: /vdevice/rtc at 4001
vio 4002: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable
vio 4002: Path: /vdevice/nvram at 4002
vio 4004: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable
vio 4004: Path: /vdevice/gscsi at 4004

FWIW, I looked at Anton's logs, and I don't think the boot failed, per
se. I think it may have timed out (but not positive on that). I was able
to boot 2.6.27-git17 on the exact same box, albeit it locks up at a
later point (the sd abort I e-mailed about in a follow-up).



> 
> Cheers,
> Ben.
> 
> > After debugging a bit, this would appear to be due to the second hunk of
> > b3c73856ae47d43d0d181f9de1c1c6c0820c4515.
> > 
> > diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
> > index b265405..1b695fd 100644
> > --- a/arch/powerpc/kernel/vio.c
> > +++ b/arch/powerpc/kernel/vio.c
> > @@ -1257,6 +1257,10 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
> >         viodev->dev.parent = &vio_bus_device.dev;
> >         viodev->dev.bus = &vio_bus_type;
> >         viodev->dev.release = vio_dev_release;
> > +        /* needed to ensure proper operation of coherent allocations
> > +         * later, in case driver doesn't set it explicitly */
> > +        dma_set_mask(&viodev->dev, DMA_BIT_MASK(64));
> > +        dma_set_coherent_mask(&viodev->dev, DMA_BIT_MASK(64));
> > 
> >         /* register with generic device framework */
> >         if (device_register(&viodev->dev)) {
> > 
> > Milton, Sonny, any thoughts?
> > 
> > Thanks,
> > Nish
> > 
> 
> 

-- 
Nishanth Aravamudan <nacc at us.ibm.com>
IBM Linux Technology Center