[PATCH] ehci-fsl: Fix 'have_sysif_regs' detection
Peter Tyser
ptyser at xes-inc.com
Tue Jan 11 10:34:14 EST 2011
Previously a check was done on an ID register at the base of a CPU's
internal USB registers to determine if system interface regsiters were
present. The check looked for an ID register that had the format
ID[0:5] == ~ID[8:13] as described in the MPC5121 User's Manual to
determine if a MPC5121 or MPC83xx/85xx was being used.
There are two issues with this method:
- The ID register is not defined on the MPC83xx/85xx CPUs, so its
unclear what is being checked on them.
- Newer CPUs such as the P4080 also don't document the ID register, but
do share the same format as the MPC5121. Thus the previous code did
not set 'have_sysif_regs' properly which results in the P4080 not
properly initializing its USB ports.
Using the device tree 'compatible' node is a cleaner way to determine if
'have_sysif_regs' should be set and resolves the USB initialization issue
seen on the P4080.
Tested on a P4080-based system and compile tested on mpc512x_defconfig
with Freescale EHCI driver enabled.
Cc: Anatolij Gustschin <agust at denx.de>
Cc: David Brownell <dbrownell at users.sourceforge.net>
Cc: Kumar Gala <galak at kernel.crashing.org>
Cc: linuxppc-dev at lists.ozlabs.org
Signed-off-by: Peter Tyser <ptyser at xes-inc.com>
---
drivers/usb/host/ehci-fsl.c | 13 -------------
drivers/usb/host/ehci-fsl.h | 3 ---
drivers/usb/host/fsl-mph-dr-of.c | 11 ++++++++---
3 files changed, 8 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 86e4289..5c761df 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -52,7 +52,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
struct resource *res;
int irq;
int retval;
- unsigned int temp;
pr_debug("initializing FSL-SOC USB Controller\n");
@@ -126,18 +125,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
goto err3;
}
- /*
- * Check if it is MPC5121 SoC, otherwise set pdata->have_sysif_regs
- * flag for 83xx or 8536 system interface registers.
- */
- if (pdata->big_endian_mmio)
- temp = in_be32(hcd->regs + FSL_SOC_USB_ID);
- else
- temp = in_le32(hcd->regs + FSL_SOC_USB_ID);
-
- if ((temp & ID_MSK) != (~((temp & NID_MSK) >> 8) & ID_MSK))
- pdata->have_sysif_regs = 1;
-
/* Enable USB controller, 83xx or 8536 */
if (pdata->have_sysif_regs)
setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index 2c83537..3fabed3 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -19,9 +19,6 @@
#define _EHCI_FSL_H
/* offsets for the non-ehci registers in the FSL SOC USB controller */
-#define FSL_SOC_USB_ID 0x0
-#define ID_MSK 0x3f
-#define NID_MSK 0x3f00
#define FSL_SOC_USB_ULPIVP 0x170
#define FSL_SOC_USB_PORTSC1 0x184
#define PORT_PTS_MSK (3<<30)
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 574b99e..341fa81 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -262,19 +262,24 @@ static void fsl_usb2_mpc5121_exit(struct platform_device *pdev)
}
}
-struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
+static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
.big_endian_desc = 1,
.big_endian_mmio = 1,
.es = 1,
+ .have_sysif_regs = 0,
.le_setup_buf = 1,
.init = fsl_usb2_mpc5121_init,
.exit = fsl_usb2_mpc5121_exit,
};
#endif /* CONFIG_PPC_MPC512x */
+static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = {
+ .have_sysif_regs = 1,
+};
+
static const struct of_device_id fsl_usb2_mph_dr_of_match[] = {
- { .compatible = "fsl-usb2-mph", },
- { .compatible = "fsl-usb2-dr", },
+ { .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, },
+ { .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, },
#ifdef CONFIG_PPC_MPC512x
{ .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, },
#endif
--
1.7.0.4
More information about the Linuxppc-dev
mailing list