[PATCH 5/5] powerpc/5200: dts: refactor dts files

Grant Likely grant.likely at secretlab.ca
Tue Jan 4 12:31:29 EST 2011


On Wed, Nov 17, 2010 at 03:28:56PM -0800, John Bonesio wrote:
> This patch creates mpc5200b.dtsi containing the information for the MPC5200b
> SoC then modifies all of the dts files for MPC5200b based systems to use
> mpc5200b.dtsi.
> 
> Signed-off-by: John Bonesio <bones at secretlab.ca>

Applied, thanks.  I may pull it out again before I ask Linus to pull
because this patch depends on a patch that I posted today to skip
registration of disabled devices, but for the time being it is in
next-devicetree.

g.

> ---
> 
>  arch/powerpc/boot/dts/cm5200.dts    |  196 +++----------------------
>  arch/powerpc/boot/dts/digsy_mtc.dts |  173 +++-------------------
>  arch/powerpc/boot/dts/lite5200b.dts |  229 ++---------------------------
>  arch/powerpc/boot/dts/media5200.dts |  212 +++------------------------
>  arch/powerpc/boot/dts/motionpro.dts |  190 +++---------------------
>  arch/powerpc/boot/dts/mpc5200b.dtsi |  276 +++++++++++++++++++++++++++++++++++
>  arch/powerpc/boot/dts/mucmc52.dts   |  176 ++++++----------------
>  arch/powerpc/boot/dts/pcm030.dts    |  193 ++----------------------
>  arch/powerpc/boot/dts/pcm032.dts    |  197 +------------------------
>  arch/powerpc/boot/dts/uc101.dts     |  162 ++++-----------------
>  10 files changed, 486 insertions(+), 1518 deletions(-)
>  create mode 100644 arch/powerpc/boot/dts/mpc5200b.dtsi
> 
> diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
> index 22f7233..c6d5d46 100644
> --- a/arch/powerpc/boot/dts/cm5200.dts
> +++ b/arch/powerpc/boot/dts/cm5200.dts
> @@ -10,226 +10,78 @@
>   * option) any later version.
>   */
>  
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>  
>  / {
>  	model = "schindler,cm5200";
>  	compatible = "schindler,cm5200";
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -	interrupt-parent = <&mpc5200_pic>;
> -
> -	cpus {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		PowerPC,5200 at 0 {
> -			device_type = "cpu";
> -			reg = <0>;
> -			d-cache-line-size = <32>;
> -			i-cache-line-size = <32>;
> -			d-cache-size = <0x4000>;		// L1, 16K
> -			i-cache-size = <0x4000>;		// L1, 16K
> -			timebase-frequency = <0>;	// from bootloader
> -			bus-frequency = <0>;		// from bootloader
> -			clock-frequency = <0>;		// from bootloader
> -		};
> -	};
> -
> -	memory {
> -		device_type = "memory";
> -		reg = <0x00000000 0x04000000>;	// 64MB
> -	};
>  
>  	soc5200 at f0000000 {
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		compatible = "fsl,mpc5200b-immr";
> -		ranges = <0 0xf0000000 0x0000c000>;
> -		reg = <0xf0000000 0x00000100>;
> -		bus-frequency = <0>;		// from bootloader
> -		system-frequency = <0>;		// from bootloader
> -
> -		cdm at 200 {
> -			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> -			reg = <0x200 0x38>;
> -		};
> -
> -		mpc5200_pic: interrupt-controller at 500 {
> -			// 5200 interrupts are encoded into two levels;
> -			interrupt-controller;
> -			#interrupt-cells = <3>;
> -			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> -			reg = <0x500 0x80>;
> -		};
> -
>  		timer at 600 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x600 0x10>;
> -			interrupts = <1 9 0>;
>  			fsl,has-wdt;
>  		};
>  
> -		timer at 610 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x610 0x10>;
> -			interrupts = <1 10 0>;
> -		};
> -
> -		timer at 620 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x620 0x10>;
> -			interrupts = <1 11 0>;
> -		};
> -
> -		timer at 630 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x630 0x10>;
> -			interrupts = <1 12 0>;
> -		};
> -
> -		timer at 640 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x640 0x10>;
> -			interrupts = <1 13 0>;
> -		};
> -
> -		timer at 650 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x650 0x10>;
> -			interrupts = <1 14 0>;
> -		};
> -
> -		timer at 660 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x660 0x10>;
> -			interrupts = <1 15 0>;
> -		};
> -
> -		timer at 670 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x670 0x10>;
> -			interrupts = <1 16 0>;
> -		};
> -
> -		rtc at 800 {	// Real time clock
> -			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> -			reg = <0x800 0x100>;
> -			interrupts = <1 5 0 1 6 0>;
> -		};
> -
> -		gpio_simple: gpio at b00 {
> -			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> -			reg = <0xb00 0x40>;
> -			interrupts = <1 7 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> -		};
> -
> -		gpio_wkup: gpio at c00 {
> -			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> -			reg = <0xc00 0x40>;
> -			interrupts = <1 8 0 0 3 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> -		};
> -
> -		spi at f00 {
> -			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> -			reg = <0xf00 0x20>;
> -			interrupts = <2 13 0 2 14 0>;
> -		};
> -
> -		usb at 1000 {
> -			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> -			reg = <0x1000 0xff>;
> -			interrupts = <2 6 0>;
> -		};
> -
> -		dma-controller at 1200 {
> -			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> -			reg = <0x1200 0x80>;
> -			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> -			              3 4 0  3 5 0  3 6 0  3 7 0
> -			              3 8 0  3 9 0  3 10 0  3 11 0
> -			              3 12 0  3 13 0  3 14 0  3 15 0>;
> +		can at 900 {
> +			status = "disabled";
>  		};
>  
> -		xlb at 1f00 {
> -			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> -			reg = <0x1f00 0x100>;
> +		can at 980 {
> +			status = "disabled";
>  		};
>  
>  		psc at 2000 {		// PSC1
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2000 0x100>;
> -			interrupts = <2 1 0>;
>  		};
>  
>  		psc at 2200 {		// PSC2
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2200 0x100>;
> -			interrupts = <2 2 0>;
>  		};
>  
>  		psc at 2400 {		// PSC3
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2400 0x100>;
> -			interrupts = <2 3 0>;
>  		};
>  
> -		psc at 2c00 {		// PSC6
> -			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2c00 0x100>;
> -			interrupts = <2 4 0>;
> +		psc at 2600 {		// PSC4
> +			status = "disabled";
>  		};
>  
> -		ethernet at 3000 {
> -			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> -			reg = <0x3000 0x400>;
> -			local-mac-address = [ 00 00 00 00 00 00 ];
> -			interrupts = <2 5 0>;
> -			phy-handle = <&phy0>;
> +		psc at 2800 {		// PSC5
> +			status = "disabled";
>  		};
>  
> -		mdio at 3000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> -			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
> -			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
> +		psc at 2c00 {		// PSC6
> +			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> +		};
>  
> +		mdio at 3000 {
>  			phy0: ethernet-phy at 0 {
>  				reg = <0>;
>  			};
>  		};
>  
> -		i2c at 3d40 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> -			reg = <0x3d40 0x40>;
> -			interrupts = <2 16 0>;
> +		ata at 3a00 {
> +			status = "disabled";
>  		};
>  
> -		sram at 8000 {
> -			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> -			reg = <0x8000 0x4000>;
> +		i2c at 3d00 {
> +			status = "disabled";
>  		};
> +
>  	};
>  
> -	localbus {
> -		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> -		#address-cells = <2>;
> -		#size-cells = <1>;
> -		ranges = <0 0 0xfc000000 0x2000000>;
> +	pci at f0000d00 {
> +		status = "disabled";
> +	};
>  
> +	localbus {
>  		// 16-bit flash device at LocalPlus Bus CS0
>  		flash at 0,0 {
>  			compatible = "cfi-flash";
>  			reg = <0 0 0x2000000>;
>  			bank-width = <2>;
>  			device-width = <2>;
> +			#size-cells = <1>;
> +			#address-cells = <1>;
>  		};
>  	};
>  };
> diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
> index 3147b98..a12b587 100644
> --- a/arch/powerpc/boot/dts/digsy_mtc.dts
> +++ b/arch/powerpc/boot/dts/digsy_mtc.dts
> @@ -11,195 +11,64 @@
>   * option) any later version.
>   */
>  
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>  
>  / {
>  	model = "intercontrol,digsy-mtc";
>  	compatible = "intercontrol,digsy-mtc";
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -	interrupt-parent = <&mpc5200_pic>;
> -
> -	cpus {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		PowerPC,5200 at 0 {
> -			device_type = "cpu";
> -			reg = <0>;
> -			d-cache-line-size = <32>;
> -			i-cache-line-size = <32>;
> -			d-cache-size = <0x4000>;		// L1, 16K
> -			i-cache-size = <0x4000>;		// L1, 16K
> -			timebase-frequency = <0>;	// from bootloader
> -			bus-frequency = <0>;		// from bootloader
> -			clock-frequency = <0>;		// from bootloader
> -		};
> -	};
>  
>  	memory {
> -		device_type = "memory";
>  		reg = <0x00000000 0x02000000>;	// 32MB
>  	};
>  
>  	soc5200 at f0000000 {
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		compatible = "fsl,mpc5200b-immr";
> -		ranges = <0 0xf0000000 0x0000c000>;
> -		reg = <0xf0000000 0x00000100>;
> -		bus-frequency = <0>;		// from bootloader
> -		system-frequency = <0>;		// from bootloader
> -
> -		cdm at 200 {
> -			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> -			reg = <0x200 0x38>;
> -		};
> -
> -		mpc5200_pic: interrupt-controller at 500 {
> -			// 5200 interrupts are encoded into two levels;
> -			interrupt-controller;
> -			#interrupt-cells = <3>;
> -			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> -			reg = <0x500 0x80>;
> -		};
> -
>  		timer at 600 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x600 0x10>;
> -			interrupts = <1 9 0>;
>  			fsl,has-wdt;
>  		};
>  
> -		timer at 610 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x610 0x10>;
> -			interrupts = <1 10 0>;
> -		};
> -
> -		timer at 620 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x620 0x10>;
> -			interrupts = <1 11 0>;
> -		};
> -
> -		timer at 630 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x630 0x10>;
> -			interrupts = <1 12 0>;
> -		};
> -
> -		timer at 640 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x640 0x10>;
> -			interrupts = <1 13 0>;
> -		};
> -
> -		timer at 650 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x650 0x10>;
> -			interrupts = <1 14 0>;
> +		rtc at 800 {
> +			status = "disabled";
>  		};
>  
> -		timer at 660 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x660 0x10>;
> -			interrupts = <1 15 0>;
> +		can at 900 {
> +			status = "disabled";
>  		};
>  
> -		timer at 670 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x670 0x10>;
> -			interrupts = <1 16 0>;
> +		can at 980 {
> +			status = "disabled";
>  		};
>  
> -		gpio_simple: gpio at b00 {
> -			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> -			reg = <0xb00 0x40>;
> -			interrupts = <1 7 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> +		psc at 2000 {		// PSC1
> +			status = "disabled";
>  		};
>  
> -		gpio_wkup: gpio at c00 {
> -			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> -			reg = <0xc00 0x40>;
> -			interrupts = <1 8 0 0 3 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> +		psc at 2200 {		// PSC2
> +			status = "disabled";
>  		};
>  
> -		spi at f00 {
> -			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> -			reg = <0xf00 0x20>;
> -			interrupts = <2 13 0 2 14 0>;
> -		};
> -
> -		usb at 1000 {
> -			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> -			reg = <0x1000 0xff>;
> -			interrupts = <2 6 0>;
> -		};
> -
> -		dma-controller at 1200 {
> -			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> -			reg = <0x1200 0x80>;
> -			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> -			              3 4 0  3 5 0  3 6 0  3 7 0
> -			              3 8 0  3 9 0  3 10 0  3 11 0
> -			              3 12 0  3 13 0  3 14 0  3 15 0>;
> -		};
> -
> -		xlb at 1f00 {
> -			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> -			reg = <0x1f00 0x100>;
> +		psc at 2400 {		// PSC3
> +			status = "disabled";
>  		};
>  
>  		psc at 2600 {		// PSC4
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2600 0x100>;
> -			interrupts = <2 11 0>;
>  		};
>  
>  		psc at 2800 {		// PSC5
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2800 0x100>;
> -			interrupts = <2 12 0>;
>  		};
>  
> -		ethernet at 3000 {
> -			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> -			reg = <0x3000 0x400>;
> -			local-mac-address = [ 00 00 00 00 00 00 ];
> -			interrupts = <2 5 0>;
> -			phy-handle = <&phy0>;
> +		psc at 2c00 {		// PSC6
> +			status = "disabled";
>  		};
>  
>  		mdio at 3000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> -			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
> -			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
> -
>  			phy0: ethernet-phy at 0 {
>  				reg = <0>;
>  			};
>  		};
>  
> -		ata at 3a00 {
> -			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> -			reg = <0x3a00 0x100>;
> -			interrupts = <2 7 0>;
> -		};
> -
>  		i2c at 3d00 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> -			reg = <0x3d00 0x40>;
> -			interrupts = <2 15 0>;
> -
>  			rtc at 50 {
>  				compatible = "at,24c08";
>  				reg = <0x50>;
> @@ -211,16 +80,16 @@
>  			};
>  		};
>  
> -		sram at 8000 {
> -			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> -			reg = <0x8000 0x4000>;
> +		i2c at 3d40 {
> +			status = "disabled";
>  		};
>  	};
>  
> +	pci at f0000d00 {
> +		status = "disabled";
> +	};
> +
>  	localbus {
> -		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> -		#address-cells = <2>;
> -		#size-cells = <1>;
>  		ranges = <0 0 0xff000000 0x1000000>;
>  
>  		// 16-bit flash device at LocalPlus Bus CS0
> diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
> index c0a4e45..8d15dfd 100644
> --- a/arch/powerpc/boot/dts/lite5200b.dts
> +++ b/arch/powerpc/boot/dts/lite5200b.dts
> @@ -10,253 +10,71 @@
>   * option) any later version.
>   */
>  
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>  
>  / {
>  	model = "fsl,lite5200b";
>  	compatible = "fsl,lite5200b";
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -	interrupt-parent = <&mpc5200_pic>;
> -
> -	cpus {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		PowerPC,5200 at 0 {
> -			device_type = "cpu";
> -			reg = <0>;
> -			d-cache-line-size = <32>;
> -			i-cache-line-size = <32>;
> -			d-cache-size = <0x4000>;	// L1, 16K
> -			i-cache-size = <0x4000>;	// L1, 16K
> -			timebase-frequency = <0>;	// from bootloader
> -			bus-frequency = <0>;		// from bootloader
> -			clock-frequency = <0>;		// from bootloader
> -		};
> -	};
>  
>  	memory {
> -		device_type = "memory";
>  		reg = <0x00000000 0x10000000>;	// 256MB
>  	};
>  
>  	soc5200 at f0000000 {
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		compatible = "fsl,mpc5200b-immr";
> -		ranges = <0 0xf0000000 0x0000c000>;
> -		reg = <0xf0000000 0x00000100>;
> -		bus-frequency = <0>;		// from bootloader
> -		system-frequency = <0>;		// from bootloader
> -
> -		cdm at 200 {
> -			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> -			reg = <0x200 0x38>;
> -		};
> -
> -		mpc5200_pic: interrupt-controller at 500 {
> -			// 5200 interrupts are encoded into two levels;
> -			interrupt-controller;
> -			#interrupt-cells = <3>;
> -			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> -			reg = <0x500 0x80>;
> -		};
> -
>  		timer at 600 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x600 0x10>;
> -			interrupts = <1 9 0>;
>  			fsl,has-wdt;
>  		};
>  
> -		timer at 610 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x610 0x10>;
> -			interrupts = <1 10 0>;
> -		};
> -
> -		timer at 620 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x620 0x10>;
> -			interrupts = <1 11 0>;
> -		};
> -
> -		timer at 630 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x630 0x10>;
> -			interrupts = <1 12 0>;
> -		};
> -
> -		timer at 640 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x640 0x10>;
> -			interrupts = <1 13 0>;
> -		};
> -
> -		timer at 650 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x650 0x10>;
> -			interrupts = <1 14 0>;
> -		};
> -
> -		timer at 660 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x660 0x10>;
> -			interrupts = <1 15 0>;
> -		};
> -
> -		timer at 670 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x670 0x10>;
> -			interrupts = <1 16 0>;
> -		};
> -
> -		rtc at 800 {	// Real time clock
> -			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> -			reg = <0x800 0x100>;
> -			interrupts = <1 5 0 1 6 0>;
> -		};
> -
> -		can at 900 {
> -			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> -			interrupts = <2 17 0>;
> -			reg = <0x900 0x80>;
> -		};
> -
> -		can at 980 {
> -			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> -			interrupts = <2 18 0>;
> -			reg = <0x980 0x80>;
> -		};
> -
> -		gpio_simple: gpio at b00 {
> -			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> -			reg = <0xb00 0x40>;
> -			interrupts = <1 7 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> -		};
> -
> -		gpio_wkup: gpio at c00 {
> -			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> -			reg = <0xc00 0x40>;
> -			interrupts = <1 8 0 0 3 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> +		psc at 2000 {		// PSC1
> +			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> +			cell-index = <0>;
>  		};
>  
> -		spi at f00 {
> -			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> -			reg = <0xf00 0x20>;
> -			interrupts = <2 13 0 2 14 0>;
> +		psc at 2200 {		// PSC2
> +			status = "disabled";
>  		};
>  
> -		usb at 1000 {
> -			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> -			reg = <0x1000 0xff>;
> -			interrupts = <2 6 0>;
> +		psc at 2400 {		// PSC3
> +			status = "disabled";
>  		};
>  
> -		dma-controller at 1200 {
> -			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> -			reg = <0x1200 0x80>;
> -			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> -			              3 4 0  3 5 0  3 6 0  3 7 0
> -			              3 8 0  3 9 0  3 10 0  3 11 0
> -			              3 12 0  3 13 0  3 14 0  3 15 0>;
> +		psc at 2600 {		// PSC4
> +			status = "disabled";
>  		};
>  
> -		xlb at 1f00 {
> -			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> -			reg = <0x1f00 0x100>;
> +		psc at 2800 {		// PSC5
> +			status = "disabled";
>  		};
>  
> -		psc at 2000 {		// PSC1
> -			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2000 0x100>;
> -			interrupts = <2 1 0>;
> +		psc at 2c00 {		// PSC6
> +			status = "disabled";
>  		};
>  
>  		// PSC2 in ac97 mode example
>  		//ac97 at 2200 {		// PSC2
>  		//	compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
>  		//	cell-index = <1>;
> -		//	reg = <0x2200 0x100>;
> -		//	interrupts = <2 2 0>;
>  		//};
>  
>  		// PSC3 in CODEC mode example
>  		//i2s at 2400 {		// PSC3
>  		//	compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
>  		//	cell-index = <2>;
> -		//	reg = <0x2400 0x100>;
> -		//	interrupts = <2 3 0>;
> -		//};
> -
> -		// PSC4 in uart mode example
> -		//serial at 2600 {		// PSC4
> -		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -		//	reg = <0x2600 0x100>;
> -		//	interrupts = <2 11 0>;
> -		//};
> -
> -		// PSC5 in uart mode example
> -		//serial at 2800 {		// PSC5
> -		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -		//	reg = <0x2800 0x100>;
> -		//	interrupts = <2 12 0>;
>  		//};
>  
>  		// PSC6 in spi mode example
>  		//spi at 2c00 {		// PSC6
>  		//	compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
>  		//	cell-index = <5>;
> -		//	reg = <0x2c00 0x100>;
> -		//	interrupts = <2 4 0>;
>  		//};
>  
> -		ethernet at 3000 {
> -			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> -			reg = <0x3000 0x400>;
> -			local-mac-address = [ 00 00 00 00 00 00 ];
> -			interrupts = <2 5 0>;
> -			phy-handle = <&phy0>;
> -		};
> -
>  		mdio at 3000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> -			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
> -			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
> -
>  			phy0: ethernet-phy at 0 {
>  				reg = <0>;
>  			};
>  		};
>  
> -		ata at 3a00 {
> -			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> -			reg = <0x3a00 0x100>;
> -			interrupts = <2 7 0>;
> -		};
> -
> -		i2c at 3d00 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> -			reg = <0x3d00 0x40>;
> -			interrupts = <2 15 0>;
> -		};
> -
>  		i2c at 3d40 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> -			reg = <0x3d40 0x40>;
> -			interrupts = <2 16 0>;
> -
>  			eeprom at 50 {
>  				compatible = "atmel,24c02";
>  				reg = <0x50>;
> @@ -270,12 +88,6 @@
>  	};
>  
>  	pci at f0000d00 {
> -		#interrupt-cells = <1>;
> -		#size-cells = <2>;
> -		#address-cells = <3>;
> -		device_type = "pci";
> -		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
> -		reg = <0xf0000d00 0x100>;
>  		interrupt-map-mask = <0xf800 0 0 7>;
>  		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
>  				 0xc000 0 0 2 &mpc5200_pic 1 1 3
> @@ -295,19 +107,14 @@
>  	};
>  
>  	localbus {
> -		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> -
> -		#address-cells = <2>;
> -		#size-cells = <1>;
> -
>  		ranges = <0 0 0xfe000000 0x02000000>;
>  
>  		flash at 0,0 {
>  			compatible = "cfi-flash";
> -			reg = <0 0 0x02000000>;
> -			bank-width = <1>;
> -			#size-cells = <1>;
> -			#address-cells = <1>;
> +                        reg = <0 0 0x02000000>;
> +                        bank-width = <1>;
> +                        #size-cells = <1>;
> +                        #address-cells = <1>;
>  
>  			partition at 0 {
>  				label = "kernel";
> diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
> index 861f09f..84558f8 100644
> --- a/arch/powerpc/boot/dts/media5200.dts
> +++ b/arch/powerpc/boot/dts/media5200.dts
> @@ -11,14 +11,11 @@
>   * option) any later version.
>   */
>  
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>  
>  / {
>  	model = "fsl,media5200";
>  	compatible = "fsl,media5200";
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -	interrupt-parent = <&mpc5200_pic>;
>  
>  	aliases {
>  		console = &console;
> @@ -30,16 +27,7 @@
>  	};
>  
>  	cpus {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
>  		PowerPC,5200 at 0 {
> -			device_type = "cpu";
> -			reg = <0>;
> -			d-cache-line-size = <32>;
> -			i-cache-line-size = <32>;
> -			d-cache-size = <0x4000>;		// L1, 16K
> -			i-cache-size = <0x4000>;		// L1, 16K
>  			timebase-frequency = <33000000>;	// 33 MHz, these were configured by U-Boot
>  			bus-frequency = <132000000>;		// 132 MHz
>  			clock-frequency = <396000000>;		// 396 MHz
> @@ -47,203 +35,53 @@
>  	};
>  
>  	memory {
> -		device_type = "memory";
>  		reg = <0x00000000 0x08000000>;	// 128MB RAM
>  	};
>  
> -	soc at f0000000 {
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		compatible = "fsl,mpc5200b-immr";
> -		ranges = <0 0xf0000000 0x0000c000>;
> -		reg = <0xf0000000 0x00000100>;
> +	soc5200 at f0000000 {
>  		bus-frequency = <132000000>;// 132 MHz
> -		system-frequency = <0>;		// from bootloader
> -
> -		cdm at 200 {
> -			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> -			reg = <0x200 0x38>;
> -		};
> -
> -		mpc5200_pic: interrupt-controller at 500 {
> -			// 5200 interrupts are encoded into two levels;
> -			interrupt-controller;
> -			#interrupt-cells = <3>;
> -			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> -			reg = <0x500 0x80>;
> -		};
>  
>  		timer at 600 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x600 0x10>;
> -			interrupts = <1 9 0>;
>  			fsl,has-wdt;
>  		};
>  
> -		timer at 610 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x610 0x10>;
> -			interrupts = <1 10 0>;
> -		};
> -
> -		timer at 620 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x620 0x10>;
> -			interrupts = <1 11 0>;
> -		};
> -
> -		timer at 630 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x630 0x10>;
> -			interrupts = <1 12 0>;
> -		};
> -
> -		timer at 640 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x640 0x10>;
> -			interrupts = <1 13 0>;
> +		psc at 2000 {	// PSC1
> +			status = "disabled";
>  		};
>  
> -		timer at 650 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x650 0x10>;
> -			interrupts = <1 14 0>;
> +		psc at 2200 {	// PSC2
> +			status = "disabled";
>  		};
>  
> -		timer at 660 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x660 0x10>;
> -			interrupts = <1 15 0>;
> +		psc at 2400 {	// PSC3
> +			status = "disabled";
>  		};
>  
> -		timer at 670 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x670 0x10>;
> -			interrupts = <1 16 0>;
> +		psc at 2600 {	// PSC4
> +			status = "disabled";
>  		};
>  
> -		rtc at 800 {	// Real time clock
> -			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> -			reg = <0x800 0x100>;
> -			interrupts = <1 5 0 1 6 0>;
> -		};
> -
> -		can at 900 {
> -			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> -			interrupts = <2 17 0>;
> -			reg = <0x900 0x80>;
> -		};
> -
> -		can at 980 {
> -			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> -			interrupts = <2 18 0>;
> -			reg = <0x980 0x80>;
> -		};
> -
> -		gpio_simple: gpio at b00 {
> -			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> -			reg = <0xb00 0x40>;
> -			interrupts = <1 7 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> -		};
> -
> -		gpio_wkup: gpio at c00 {
> -			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> -			reg = <0xc00 0x40>;
> -			interrupts = <1 8 0 0 3 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> -		};
> -
> -		spi at f00 {
> -			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> -			reg = <0xf00 0x20>;
> -			interrupts = <2 13 0 2 14 0>;
> -		};
> -
> -		usb at 1000 {
> -			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> -			reg = <0x1000 0x100>;
> -			interrupts = <2 6 0>;
> -		};
> -
> -		dma-controller at 1200 {
> -			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> -			reg = <0x1200 0x80>;
> -			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> -			              3 4 0  3 5 0  3 6 0  3 7 0
> -			              3 8 0  3 9 0  3 10 0  3 11 0
> -			              3 12 0  3 13 0  3 14 0  3 15 0>;
> -		};
> -
> -		xlb at 1f00 {
> -			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> -			reg = <0x1f00 0x100>;
> +		psc at 2800 {	// PSC5
> +			status = "disabled";
>  		};
>  
>  		// PSC6 in uart mode
>  		console: psc at 2c00 {		// PSC6
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2c00 0x100>;
> -			interrupts = <2 4 0>;
> -		};
> -
> -		eth0: ethernet at 3000 {
> -			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> -			reg = <0x3000 0x400>;
> -			local-mac-address = [ 00 00 00 00 00 00 ];
> -			interrupts = <2 5 0>;
> -			phy-handle = <&phy0>;
>  		};
>  
>  		mdio at 3000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> -			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
> -			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
> -
>  			phy0: ethernet-phy at 0 {
>  				reg = <0>;
>  			};
>  		};
>  
> -		ata at 3a00 {
> -			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> -			reg = <0x3a00 0x100>;
> -			interrupts = <2 7 0>;
> -		};
> -
> -		i2c at 3d00 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> -			reg = <0x3d00 0x40>;
> -			interrupts = <2 15 0>;
> -		};
> -
> -		i2c at 3d40 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> -			reg = <0x3d40 0x40>;
> -			interrupts = <2 16 0>;
> -		};
> -
> -		sram at 8000 {
> -			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> -			reg = <0x8000 0x4000>;
> +		usb at 1000 {
> +			reg = <0x1000 0x100>;
>  		};
>  	};
>  
>  	pci at f0000d00 {
> -		#interrupt-cells = <1>;
> -		#size-cells = <2>;
> -		#address-cells = <3>;
> -		device_type = "pci";
> -		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
> -		reg = <0xf0000d00 0x100>;
>  		interrupt-map-mask = <0xf800 0 0 7>;
>  		interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
>  				 0xc000 0 0 2 &media5200_fpga 0 3
> @@ -260,37 +98,29 @@
>  
>  				 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
>  				>;
> -		clock-frequency = <0>; // From boot loader
> -		interrupts = <2 8 0 2 9 0 2 10 0>;
> -		interrupt-parent = <&mpc5200_pic>;
> -		bus-range = <0 0>;
>  		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
>  			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
>  			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
> +		interrupt-parent = <&mpc5200_pic>;
>  	};
>  
>  	localbus {
> -		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> -		#address-cells = <2>;
> -		#size-cells = <1>;
> -
>  		ranges = < 0 0 0xfc000000 0x02000000
>  			   1 0 0xfe000000 0x02000000
>  			   2 0 0xf0010000 0x00010000
>  			   3 0 0xf0020000 0x00010000 >;
> -
>  		flash at 0,0 {
>  			compatible = "amd,am29lv28ml", "cfi-flash";
> -			reg = <0 0x0 0x2000000>;		// 32 MB
> -			bank-width = <4>;			// Width in bytes of the flash bank
> -			device-width = <2>;			// Two devices on each bank
> +			reg = <0 0x0 0x2000000>;                // 32 MB
> +			bank-width = <4>;                       // Width in bytes of the flash bank
> +			device-width = <2>;                     // Two devices on each bank
>  		};
>  
>  		flash at 1,0 {
>  			compatible = "amd,am29lv28ml", "cfi-flash";
> -			reg = <1 0 0x2000000>;			// 32 MB
> -			bank-width = <4>;			// Width in bytes of the flash bank
> -			device-width = <2>;			// Two devices on each bank
> +			reg = <1 0 0x2000000>;                  // 32 MB
> +			bank-width = <4>;                       // Width in bytes of the flash bank
> +			device-width = <2>;                     // Two devices on each bank
>  		};
>  
>  		media5200_fpga: fpga at 2,0 {
> diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
> index 97cb085..2276ccd 100644
> --- a/arch/powerpc/boot/dts/motionpro.dts
> +++ b/arch/powerpc/boot/dts/motionpro.dts
> @@ -10,219 +10,69 @@
>   * option) any later version.
>   */
>  
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>  
>  / {
>  	model = "promess,motionpro";
>  	compatible = "promess,motionpro";
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -	interrupt-parent = <&mpc5200_pic>;
> -
> -	cpus {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		PowerPC,5200 at 0 {
> -			device_type = "cpu";
> -			reg = <0>;
> -			d-cache-line-size = <32>;
> -			i-cache-line-size = <32>;
> -			d-cache-size = <0x4000>;	// L1, 16K
> -			i-cache-size = <0x4000>;	// L1, 16K
> -			timebase-frequency = <0>;	// from bootloader
> -			bus-frequency = <0>;		// from bootloader
> -			clock-frequency = <0>;		// from bootloader
> -		};
> -	};
> -
> -	memory {
> -		device_type = "memory";
> -		reg = <0x00000000 0x04000000>;	// 64MB
> -	};
>  
>  	soc5200 at f0000000 {
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		compatible = "fsl,mpc5200b-immr";
> -		ranges = <0 0xf0000000 0x0000c000>;
> -		reg = <0xf0000000 0x00000100>;
> -		bus-frequency = <0>;		// from bootloader
> -		system-frequency = <0>;		// from bootloader
> -
> -		cdm at 200 {
> -			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> -			reg = <0x200 0x38>;
> -		};
> -
> -		mpc5200_pic: interrupt-controller at 500 {
> -			// 5200 interrupts are encoded into two levels;
> -			interrupt-controller;
> -			#interrupt-cells = <3>;
> -			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> -			reg = <0x500 0x80>;
> -		};
> -
>  		timer at 600 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x600 0x10>;
> -			interrupts = <1 9 0>;
>  			fsl,has-wdt;
>  		};
>  
> -		timer at 610 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x610 0x10>;
> -			interrupts = <1 10 0>;
> -		};
> -
> -		timer at 620 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x620 0x10>;
> -			interrupts = <1 11 0>;
> -		};
> -
> -		timer at 630 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x630 0x10>;
> -			interrupts = <1 12 0>;
> -		};
> -
> -		timer at 640 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x640 0x10>;
> -			interrupts = <1 13 0>;
> -		};
> -
> -		timer at 650 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x650 0x10>;
> -			interrupts = <1 14 0>;
> -		};
> -
>  		timer at 660 {	// Motion-PRO status LED
>  			compatible = "promess,motionpro-led";
>  			label = "motionpro-statusled";
> -			reg = <0x660 0x10>;
> -			interrupts = <1 15 0>;
>  			blink-delay = <100>; // 100 msec
>  		};
>  
>  		timer at 670 {	// Motion-PRO ready LED
>  			compatible = "promess,motionpro-led";
>  			label = "motionpro-readyled";
> -			reg = <0x670 0x10>;
> -			interrupts = <1 16 0>;
>  		};
>  
> -		rtc at 800 {	// Real time clock
> -			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> -			reg = <0x800 0x100>;
> -			interrupts = <1 5 0 1 6 0>;
> -		};
> -
> -		can at 980 {
> -			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> -			interrupts = <2 18 0>;
> -			reg = <0x980 0x80>;
> -		};
> -
> -		gpio_simple: gpio at b00 {
> -			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> -			reg = <0xb00 0x40>;
> -			interrupts = <1 7 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> -		};
> -
> -		gpio_wkup: gpio at c00 {
> -			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> -			reg = <0xc00 0x40>;
> -			interrupts = <1 8 0 0 3 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> -		};
> -
> -		spi at f00 {
> -			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> -			reg = <0xf00 0x20>;
> -			interrupts = <2 13 0 2 14 0>;
> -		};
> -
> -		usb at 1000 {
> -			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> -			reg = <0x1000 0xff>;
> -			interrupts = <2 6 0>;
> -		};
> -
> -		dma-controller at 1200 {
> -			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> -			reg = <0x1200 0x80>;
> -			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> -			              3 4 0  3 5 0  3 6 0  3 7 0
> -			              3 8 0  3 9 0  3 10 0  3 11 0
> -			              3 12 0  3 13 0  3 14 0  3 15 0>;
> -		};
> -
> -		xlb at 1f00 {
> -			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> -			reg = <0x1f00 0x100>;
> +		can at 900 {
> +			status = "disabled";
>  		};
>  
>  		psc at 2000 {		// PSC1
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2000 0x100>;
> -			interrupts = <2 1 0>;
>  		};
>  
>  		// PSC2 in spi master mode 
>  		psc at 2200 {		// PSC2
>  			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
>  			cell-index = <1>;
> -			reg = <0x2200 0x100>;
> -			interrupts = <2 2 0>;
>  		};
>  
> -		// PSC5 in uart mode
> +		psc at 2400 {		// PSC3
> +			status = "disabled";
> +		};
> +
> +		psc at 2600 {		// PSC4
> +			status = "disabled";
> +		};
> +
>  		psc at 2800 {		// PSC5
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2800 0x100>;
> -			interrupts = <2 12 0>;
>  		};
>  
> -		ethernet at 3000 {
> -			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> -			reg = <0x3000 0x400>;
> -			local-mac-address = [ 00 00 00 00 00 00 ];
> -			interrupts = <2 5 0>;
> -			phy-handle = <&phy0>;
> +		psc at 2c00 {		// PSC6
> +			status = "disabled";
>  		};
>  
>  		mdio at 3000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> -			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
> -			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
> -
>  			phy0: ethernet-phy at 2 {
>  				reg = <2>;
>  			};
>  		};
>  
> -		ata at 3a00 {
> -			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> -			reg = <0x3a00 0x100>;
> -			interrupts = <2 7 0>;
> +		i2c at 3d00 {
> +			status = "disabled";
>  		};
>  
>  		i2c at 3d40 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> -			reg = <0x3d40 0x40>;
> -			interrupts = <2 16 0>;
> -
>  			rtc at 68 {
>  				compatible = "dallas,ds1339";
>  				reg = <0x68>;
> @@ -235,10 +85,11 @@
>  		};
>  	};
>  
> +	pci at f0000d00 {
> +		status = "disabled";
> +	};
> +
>  	localbus {
> -		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> -		#address-cells = <2>;
> -		#size-cells = <1>;
>  		ranges = <0 0 0xff000000 0x01000000
>  			  1 0 0x50000000 0x00010000
>  			  2 0 0x50010000 0x00010000
> @@ -277,6 +128,9 @@
>  			reg = <0 0 0x01000000>;
>  			bank-width = <2>;
>  			device-width = <2>;
> +			#size-cells = <1>;
> +			#address-cells = <1>;
>  		};
> +
>  	};
>  };
> diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
> new file mode 100644
> index 0000000..62cb4c9
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
> @@ -0,0 +1,276 @@
> +/*
> + * base MPC5200b Device Tree Source
> + *
> + * Copyright (C) 2010 SecretLab
> + * Grant Likely <grant at secretlab.ca>
> + * John Bonesio <bones at secretlab.ca>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> +	model = "fsl,mpc5200b";
> +	compatible = "fsl,mpc5200b";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	interrupt-parent = <&mpc5200_pic>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		powerpc: PowerPC,5200 at 0 {
> +			device_type = "cpu";
> +			reg = <0>;
> +			d-cache-line-size = <32>;
> +			i-cache-line-size = <32>;
> +			d-cache-size = <0x4000>;	// L1, 16K
> +			i-cache-size = <0x4000>;	// L1, 16K
> +			timebase-frequency = <0>;	// from bootloader
> +			bus-frequency = <0>;		// from bootloader
> +			clock-frequency = <0>;		// from bootloader
> +		};
> +	};
> +
> +	memory: memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x04000000>;	// 64MB
> +	};
> +
> +	soc: soc5200 at f0000000 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "fsl,mpc5200b-immr";
> +		ranges = <0 0xf0000000 0x0000c000>;
> +		reg = <0xf0000000 0x00000100>;
> +		bus-frequency = <0>;		// from bootloader
> +		system-frequency = <0>;		// from bootloader
> +
> +		cdm at 200 {
> +			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> +			reg = <0x200 0x38>;
> +		};
> +
> +		mpc5200_pic: interrupt-controller at 500 {
> +			// 5200 interrupts are encoded into two levels;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> +			reg = <0x500 0x80>;
> +		};
> +
> +		timer at 600 {	// General Purpose Timer
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x600 0x10>;
> +			interrupts = <1 9 0>;
> +		};
> +
> +		timer at 610 {	// General Purpose Timer
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x610 0x10>;
> +			interrupts = <1 10 0>;
> +		};
> +
> +		timer at 620 {	// General Purpose Timer
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x620 0x10>;
> +			interrupts = <1 11 0>;
> +		};
> +
> +		timer at 630 {	// General Purpose Timer
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x630 0x10>;
> +			interrupts = <1 12 0>;
> +		};
> +
> +		timer at 640 {	// General Purpose Timer
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x640 0x10>;
> +			interrupts = <1 13 0>;
> +		};
> +
> +		timer at 650 {	// General Purpose Timer
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x650 0x10>;
> +			interrupts = <1 14 0>;
> +		};
> +
> +		timer at 660 {	// General Purpose Timer
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x660 0x10>;
> +			interrupts = <1 15 0>;
> +		};
> +
> +		timer at 670 {	// General Purpose Timer
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x670 0x10>;
> +			interrupts = <1 16 0>;
> +		};
> +
> +		rtc at 800 {	// Real time clock
> +			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> +			reg = <0x800 0x100>;
> +			interrupts = <1 5 0 1 6 0>;
> +		};
> +
> +		can at 900 {
> +			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> +			interrupts = <2 17 0>;
> +			reg = <0x900 0x80>;
> +		};
> +
> +		can at 980 {
> +			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> +			interrupts = <2 18 0>;
> +			reg = <0x980 0x80>;
> +		};
> +
> +		gpio_simple: gpio at b00 {
> +			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> +			reg = <0xb00 0x40>;
> +			interrupts = <1 7 0>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpio_wkup: gpio at c00 {
> +			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> +			reg = <0xc00 0x40>;
> +			interrupts = <1 8 0 0 3 0>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		spi at f00 {
> +			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> +			reg = <0xf00 0x20>;
> +			interrupts = <2 13 0 2 14 0>;
> +		};
> +
> +		usb: usb at 1000 {
> +			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> +			reg = <0x1000 0xff>;
> +			interrupts = <2 6 0>;
> +		};
> +
> +		dma-controller at 1200 {
> +			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> +			reg = <0x1200 0x80>;
> +			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> +			              3 4 0  3 5 0  3 6 0  3 7 0
> +			              3 8 0  3 9 0  3 10 0  3 11 0
> +			              3 12 0  3 13 0  3 14 0  3 15 0>;
> +		};
> +
> +		xlb at 1f00 {
> +			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> +			reg = <0x1f00 0x100>;
> +		};
> +
> +		psc1: psc at 2000 {		// PSC1
> +			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
> +			reg = <0x2000 0x100>;
> +			interrupts = <2 1 0>;
> +		};
> +
> +		psc2: psc at 2200 {		// PSC2
> +			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
> +			reg = <0x2200 0x100>;
> +			interrupts = <2 2 0>;
> +		};
> +
> +		psc3: psc at 2400 {		// PSC3
> +			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
> +			reg = <0x2400 0x100>;
> +			interrupts = <2 3 0>;
> +		};
> +
> +		psc4: psc at 2600 {		// PSC4
> +			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
> +			reg = <0x2600 0x100>;
> +			interrupts = <2 11 0>;
> +		};
> +
> +		psc5: psc at 2800 {		// PSC5
> +			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
> +			reg = <0x2800 0x100>;
> +			interrupts = <2 12 0>;
> +		};
> +
> +		psc6: psc at 2c00 {		// PSC6
> +			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
> +			reg = <0x2c00 0x100>;
> +			interrupts = <2 4 0>;
> +		};
> +
> +		eth0: ethernet at 3000 {
> +			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> +			reg = <0x3000 0x400>;
> +			local-mac-address = [ 00 00 00 00 00 00 ];
> +			interrupts = <2 5 0>;
> +			phy-handle = <&phy0>;
> +		};
> +
> +		mdio at 3000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> +			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
> +			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
> +		};
> +
> +		ata at 3a00 {
> +			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> +			reg = <0x3a00 0x100>;
> +			interrupts = <2 7 0>;
> +		};
> +
> +		i2c at 3d00 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> +			reg = <0x3d00 0x40>;
> +			interrupts = <2 15 0>;
> +		};
> +
> +		i2c at 3d40 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> +			reg = <0x3d40 0x40>;
> +			interrupts = <2 16 0>;
> +		};
> +
> +		sram at 8000 {
> +			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> +			reg = <0x8000 0x4000>;
> +		};
> +	};
> +
> +	pci: pci at f0000d00 {
> +		#interrupt-cells = <1>;
> +		#size-cells = <2>;
> +		#address-cells = <3>;
> +		device_type = "pci";
> +		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
> +		reg = <0xf0000d00 0x100>;
> +		// interrupt-map-mask = need to add
> +		// interrupt-map = need to add
> +		clock-frequency = <0>; // From boot loader
> +		interrupts = <2 8 0 2 9 0 2 10 0>;
> +		bus-range = <0 0>;
> +		// ranges = need to add
> +	};
> +
> +	localbus: localbus {
> +		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0xfc000000 0x2000000>;
> +	};
> +};
> diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
> index 8dc212d..b369db5 100644
> --- a/arch/powerpc/boot/dts/mucmc52.dts
> +++ b/arch/powerpc/boot/dts/mucmc52.dts
> @@ -11,172 +11,105 @@
>   * option) any later version.
>   */
>  
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>  
>  / {
>  	model = "manroland,mucmc52";
>  	compatible = "manroland,mucmc52";
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -	interrupt-parent = <&mpc5200_pic>;
> -
> -	cpus {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		PowerPC,5200 at 0 {
> -			device_type = "cpu";
> -			reg = <0>;
> -			d-cache-line-size = <32>;
> -			i-cache-line-size = <32>;
> -			d-cache-size = <0x4000>;	// L1, 16K
> -			i-cache-size = <0x4000>;	// L1, 16K
> -			timebase-frequency = <0>;	// from bootloader
> -			bus-frequency = <0>;		// from bootloader
> -			clock-frequency = <0>;		// from bootloader
> -		};
> -	};
> -
> -	memory {
> -		device_type = "memory";
> -		reg = <0x00000000 0x04000000>;	// 64MB
> -	};
>  
>  	soc5200 at f0000000 {
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		compatible = "fsl,mpc5200b-immr";
> -		ranges = <0 0xf0000000 0x0000c000>;
> -		reg = <0xf0000000 0x00000100>;
> -		bus-frequency = <0>;		// from bootloader
> -		system-frequency = <0>;		// from bootloader
> -
> -		cdm at 200 {
> -			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> -			reg = <0x200 0x38>;
> -		};
> -
> -		mpc5200_pic: interrupt-controller at 500 {
> -			// 5200 interrupts are encoded into two levels;
> -			interrupt-controller;
> -			#interrupt-cells = <3>;
> -			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> -			reg = <0x500 0x80>;
> -		};
> -
>  		gpt0: timer at 600 {	// GPT 0 in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x600 0x10>;
> -			interrupts = <1 9 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt1: timer at 610 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x610 0x10>;
> -			interrupts = <1 10 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt2: timer at 620 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x620 0x10>;
> -			interrupts = <1 11 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt3: timer at 630 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x630 0x10>;
> -			interrupts = <1 12 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
> -		gpio_simple: gpio at b00 {
> -			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> -			reg = <0xb00 0x40>;
> -			interrupts = <1 7 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> +		timer at 640 {
> +			status = "disabled";
>  		};
>  
> -		gpio_wkup: gpio at c00 {
> -			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> -			reg = <0xc00 0x40>;
> -			interrupts = <1 8 0 0 3 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> +		timer at 650 {
> +			status = "disabled";
>  		};
>  
> -		dma-controller at 1200 {
> -			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> -			reg = <0x1200 0x80>;
> -			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> -			              3 4 0  3 5 0  3 6 0  3 7 0
> -			              3 8 0  3 9 0  3 10 0  3 11 0
> -			              3 12 0  3 13 0  3 14 0  3 15 0>;
> +		timer at 660 {
> +			status = "disabled";
>  		};
>  
> -		xlb at 1f00 {
> -			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> -			reg = <0x1f00 0x100>;
> +		timer at 670 {
> +			status = "disabled";
>  		};
>  
> -		psc at 2000 { /* PSC1 in UART mode */
> -			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2000 0x100>;
> -			interrupts = <2 1 0>;
> +		rtc at 800 {
> +			status = "disabled";
> +		};
> +
> +		can at 900 {
> +			status = "disabled";
> +		};
> +
> +		can at 980 {
> +			status = "disabled";
> +		};
> +
> +		spi at f00 {
> +			status = "disabled";
> +		};
> +
> +		usb at 1000 {
> +			status = "disabled";
>  		};
>  
> -		psc at 2200 { /* PSC2 in UART mode */
> +		psc at 2000 {		// PSC1
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2200 0x100>;
> -			interrupts = <2 2 0>;
>  		};
>  
> -		psc at 2c00 { /* PSC6 in UART mode */
> +		psc at 2200 {		// PSC2
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2c00 0x100>;
> -			interrupts = <2 4 0>;
>  		};
>  
> -		ethernet at 3000 {
> -			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> -			reg = <0x3000 0x400>;
> -			local-mac-address = [ 00 00 00 00 00 00 ];
> -			interrupts = <2 5 0>;
> -			phy-handle = <&phy0>;
> +		psc at 2400 {		// PSC3
> +			status = "disabled";
>  		};
>  
> -		mdio at 3000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> -			reg = <0x3000 0x400>; 	// fec range, since we need to setup fec interrupts
> -			interrupts = <2 5 0>; 	// these are for "mii command finished", not link changes & co.
> +		psc at 2600 {		// PSC4
> +			status = "disabled";
> +		};
> +
> +		psc at 2800 {		// PSC5
> +			status = "disabled";
> +		};
>  
> +		psc at 2c00 {		// PSC6
> +			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> +		};
> +
> +		mdio at 3000 {
>  			phy0: ethernet-phy at 0 {
>  				compatible = "intel,lxt971";
>  				reg = <0>;
>  			};
>  		};
>  
> -		ata at 3a00 {
> -			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> -			reg = <0x3a00 0x100>;
> -			interrupts = <2 7 0>;
> +		i2c at 3d00 {
> +			status = "disabled";
>  		};
>  
>  		i2c at 3d40 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> -			reg = <0x3d40 0x40>;
> -			interrupts = <2 16 0>;
>  			hwmon at 2c {
>  				compatible = "ad,adm9240";
>  				reg = <0x2c>;
> @@ -186,20 +119,9 @@
>  				reg = <0x51>;
>  			};
>  		};
> -
> -		sram at 8000 {
> -			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> -			reg = <0x8000 0x4000>;
> -		};
>  	};
>  
>  	pci at f0000d00 {
> -		#interrupt-cells = <1>;
> -		#size-cells = <2>;
> -		#address-cells = <3>;
> -		device_type = "pci";
> -		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
> -		reg = <0xf0000d00 0x100>;
>  		interrupt-map-mask = <0xf800 0 0 7>;
>  		interrupt-map = <
>  				/* IDSEL 0x10 */
> @@ -208,20 +130,12 @@
>  				0x8000 0 0 3 &mpc5200_pic 0 2 3
>  				0x8000 0 0 4 &mpc5200_pic 0 1 3
>  				>;
> -		clock-frequency = <0>; // From boot loader
> -		interrupts = <2 8 0 2 9 0 2 10 0>;
> -		bus-range = <0 0>;
>  		ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
>  			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
>  			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
>  	};
>  
>  	localbus {
> -		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> -
> -		#address-cells = <2>;
> -		#size-cells = <1>;
> -
>  		ranges = <0 0 0xff800000 0x00800000
>  			  1 0 0x80000000 0x00800000
>  			  3 0 0x80000000 0x00800000>;
> diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
> index f3e30bb..b2ee689 100644
> --- a/arch/powerpc/boot/dts/pcm030.dts
> +++ b/arch/powerpc/boot/dts/pcm030.dts
> @@ -12,244 +12,88 @@
>   * option) any later version.
>   */
>  
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>  
>  / {
>  	model = "phytec,pcm030";
>  	compatible = "phytec,pcm030";
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -	interrupt-parent = <&mpc5200_pic>;
> -
> -	cpus {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		PowerPC,5200 at 0 {
> -			device_type = "cpu";
> -			reg = <0>;
> -			d-cache-line-size = <32>;
> -			i-cache-line-size = <32>;
> -			d-cache-size = <0x4000>;	// L1, 16K
> -			i-cache-size = <0x4000>;	// L1, 16K
> -			timebase-frequency = <0>;	// from bootloader
> -			bus-frequency = <0>;		// from bootloader
> -			clock-frequency = <0>;		// from bootloader
> -		};
> -	};
> -
> -	memory {
> -		device_type = "memory";
> -		reg = <0x00000000 0x04000000>;	// 64MB
> -	};
>  
>  	soc5200 at f0000000 {
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		compatible = "fsl,mpc5200b-immr";
> -		ranges = <0 0xf0000000 0x0000c000>;
> -		bus-frequency = <0>;		// from bootloader
> -		system-frequency = <0>;		// from bootloader
> -
> -		cdm at 200 {
> -			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> -			reg = <0x200 0x38>;
> -		};
> -
> -		mpc5200_pic: interrupt-controller at 500 {
> -			// 5200 interrupts are encoded into two levels;
> -			interrupt-controller;
> -			#interrupt-cells = <3>;
> -			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> -			reg = <0x500 0x80>;
> -		};
> -
> -		timer at 600 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x600 0x10>;
> -			interrupts = <1 9 0>;
> +		timer at 600 {		// General Purpose Timer
>  			fsl,has-wdt;
>  		};
>  
> -		timer at 610 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x610 0x10>;
> -			interrupts = <1 10 0>;
> -		};
> -
>  		gpt2: timer at 620 {	// General Purpose Timer in GPIO mode
>  			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> -			reg = <0x620 0x10>;
> -			interrupts = <1 11 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt3: timer at 630 {	// General Purpose Timer in GPIO mode
>  			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> -			reg = <0x630 0x10>;
> -			interrupts = <1 12 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt4: timer at 640 {	// General Purpose Timer in GPIO mode
>  			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> -			reg = <0x640 0x10>;
> -			interrupts = <1 13 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt5: timer at 650 {	// General Purpose Timer in GPIO mode
>  			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> -			reg = <0x650 0x10>;
> -			interrupts = <1 14 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt6: timer at 660 {	// General Purpose Timer in GPIO mode
>  			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> -			reg = <0x660 0x10>;
> -			interrupts = <1 15 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt7: timer at 670 {	// General Purpose Timer in GPIO mode
>  			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
> -			reg = <0x670 0x10>;
> -			interrupts = <1 16 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> -		};
> -
> -		rtc at 800 {	// Real time clock
> -			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> -			reg = <0x800 0x100>;
> -			interrupts = <1 5 0 1 6 0>;
> -		};
> -
> -		can at 900 {
> -			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> -			interrupts = <2 17 0>;
> -			reg = <0x900 0x80>;
> -		};
> -
> -		can at 980 {
> -			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> -			interrupts = <2 18 0>;
> -			reg = <0x980 0x80>;
> -		};
> -
> -		gpio_simple: gpio at b00 {
> -			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> -			reg = <0xb00 0x40>;
> -			interrupts = <1 7 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> -		};
> -
> -		gpio_wkup: gpio at c00 {
> -			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> -			reg = <0xc00 0x40>;
> -			interrupts = <1 8 0 0 3 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
> -		spi at f00 {
> -			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> -			reg = <0xf00 0x20>;
> -			interrupts = <2 13 0 2 14 0>;
> -		};
> -
> -		usb at 1000 {
> -			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> -			reg = <0x1000 0xff>;
> -			interrupts = <2 6 0>;
> -		};
> -
> -		dma-controller at 1200 {
> -			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> -			reg = <0x1200 0x80>;
> -			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> -			              3 4 0  3 5 0  3 6 0  3 7 0
> -			              3 8 0  3 9 0  3 10 0  3 11 0
> -			              3 12 0  3 13 0  3 14 0  3 15 0>;
> -		};
> -
> -		xlb at 1f00 {
> -			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> -			reg = <0x1f00 0x100>;
> -		};
> -
>  		psc at 2000 { /* PSC1 in ac97 mode */
>  			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
>  			cell-index = <0>;
> -			reg = <0x2000 0x100>;
> -			interrupts = <2 1 0>;
>  		};
>  
>  		/* PSC2 port is used by CAN1/2 */
> +		psc at 2200 {
> +			status = "disabled";
> +		};
>  
>  		psc at 2400 { /* PSC3 in UART mode */
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2400 0x100>;
> -			interrupts = <2 3 0>;
>  		};
>  
>  		/* PSC4 is ??? */
> -
> +		psc at 2600 {
> +			status = "disabled";
> +		};
> +		
>  		/* PSC5 is ??? */
> +		psc at 2800 {
> +			status = "disabled";
> +		};
>  
>  		psc at 2c00 { /* PSC6 in UART mode */
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2c00 0x100>;
> -			interrupts = <2 4 0>;
> -		};
> -
> -		ethernet at 3000 {
> -			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> -			reg = <0x3000 0x400>;
> -			local-mac-address = [ 00 00 00 00 00 00 ];
> -			interrupts = <2 5 0>;
> -			phy-handle = <&phy0>;
>  		};
>  
>  		mdio at 3000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> -			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
> -			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
> -
>  			phy0: ethernet-phy at 0 {
>  				reg = <0>;
>  			};
>  		};
>  
> -		ata at 3a00 {
> -			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> -			reg = <0x3a00 0x100>;
> -			interrupts = <2 7 0>;
> -		};
> -
> -		i2c at 3d00 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> -			reg = <0x3d00 0x40>;
> -			interrupts = <2 15 0>;
> -		};
> -
>  		i2c at 3d40 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> -			reg = <0x3d40 0x40>;
> -			interrupts = <2 16 0>;
>  			rtc at 51 {
>  				compatible = "nxp,pcf8563";
>  				reg = <0x51>;
> @@ -267,12 +111,6 @@
>  	};
>  
>  	pci at f0000d00 {
> -		#interrupt-cells = <1>;
> -		#size-cells = <2>;
> -		#address-cells = <3>;
> -		device_type = "pci";
> -		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
> -		reg = <0xf0000d00 0x100>;
>  		interrupt-map-mask = <0xf800 0 0 7>;
>  		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
>  				 0xc000 0 0 2 &mpc5200_pic 1 1 3
> @@ -283,11 +121,12 @@
>  				 0xc800 0 0 2 &mpc5200_pic 1 2 3
>  				 0xc800 0 0 3 &mpc5200_pic 1 3 3
>  				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
> -		clock-frequency = <0>; // From boot loader
> -		interrupts = <2 8 0 2 9 0 2 10 0>;
> -		bus-range = <0 0>;
>  		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
>  			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
>  			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
>  	};
> +
> +	localbus {
> +		status = "disabled";
> +	};
>  };
> diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
> index e0f2702..184e194 100644
> --- a/arch/powerpc/boot/dts/pcm032.dts
> +++ b/arch/powerpc/boot/dts/pcm032.dts
> @@ -12,99 +12,37 @@
>   * option) any later version.
>   */
>  
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>  
>  / {
>  	model = "phytec,pcm032";
>  	compatible = "phytec,pcm032";
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -	interrupt-parent = <&mpc5200_pic>;
> -
> -	cpus {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		PowerPC,5200 at 0 {
> -			device_type = "cpu";
> -			reg = <0>;
> -			d-cache-line-size = <32>;
> -			i-cache-line-size = <32>;
> -			d-cache-size = <0x4000>;	// L1, 16K
> -			i-cache-size = <0x4000>;	// L1, 16K
> -			timebase-frequency = <0>;	// from bootloader
> -			bus-frequency = <0>;		// from bootloader
> -			clock-frequency = <0>;		// from bootloader
> -		};
> -	};
>  
>  	memory {
> -		device_type = "memory";
>  		reg = <0x00000000 0x08000000>;	// 128MB
>  	};
>  
>  	soc5200 at f0000000 {
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		compatible = "fsl,mpc5200b-immr";
> -		ranges = <0 0xf0000000 0x0000c000>;
> -		bus-frequency = <0>;		// from bootloader
> -		system-frequency = <0>;		// from bootloader
> -
> -		cdm at 200 {
> -			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> -			reg = <0x200 0x38>;
> -		};
> -
> -		mpc5200_pic: interrupt-controller at 500 {
> -			// 5200 interrupts are encoded into two levels;
> -			interrupt-controller;
> -			#interrupt-cells = <3>;
> -			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> -			reg = <0x500 0x80>;
> -		};
> -
> -		timer at 600 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x600 0x10>;
> -			interrupts = <1 9 0>;
> +		timer at 600 {		// General Purpose Timer
>  			fsl,has-wdt;
>  		};
>  
> -		timer at 610 {	// General Purpose Timer
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x610 0x10>;
> -			interrupts = <1 10 0>;
> -		};
> -
>  		gpt2: timer at 620 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x620 0x10>;
> -			interrupts = <1 11 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt3: timer at 630 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x630 0x10>;
> -			interrupts = <1 12 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt4: timer at 640 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x640 0x10>;
> -			interrupts = <1 13 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt5: timer at 650 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x650 0x10>;
> -			interrupts = <1 14 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
> @@ -118,138 +56,45 @@
>  		};
>  
>  		gpt7: timer at 670 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x670 0x10>;
> -			interrupts = <1 16 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> -		};
> -
> -		rtc at 800 {	// Real time clock
> -			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
> -			reg = <0x800 0x100>;
> -			interrupts = <1 5 0 1 6 0>;
> -		};
> -
> -		can at 900 {
> -			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> -			interrupts = <2 17 0>;
> -			reg = <0x900 0x80>;
> -		};
> -
> -		can at 980 {
> -			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> -			interrupts = <2 18 0>;
> -			reg = <0x980 0x80>;
> -		};
> -
> -		gpio_simple: gpio at b00 {
> -			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> -			reg = <0xb00 0x40>;
> -			interrupts = <1 7 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> -		};
> -
> -		gpio_wkup: gpio at c00 {
> -			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> -			reg = <0xc00 0x40>;
> -			interrupts = <1 8 0 0 3 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
> -		spi at f00 {
> -			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> -			reg = <0xf00 0x20>;
> -			interrupts = <2 13 0 2 14 0>;
> -		};
> -
> -		usb at 1000 {
> -			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> -			reg = <0x1000 0xff>;
> -			interrupts = <2 6 0>;
> -		};
> -
> -		dma-controller at 1200 {
> -			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> -			reg = <0x1200 0x80>;
> -			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> -			              3 4 0  3 5 0  3 6 0  3 7 0
> -			              3 8 0  3 9 0  3 10 0  3 11 0
> -			              3 12 0  3 13 0  3 14 0  3 15 0>;
> -		};
> -
> -		xlb at 1f00 {
> -			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> -			reg = <0x1f00 0x100>;
> -		};
> -
>  		psc at 2000 {	/* PSC1 is ac97 */
>  			compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
>  			cell-index = <0>;
> -			reg = <0x2000 0x100>;
> -			interrupts = <2 1 0>;
>  		};
>  
>  		/* PSC2 port is used by CAN1/2 */
> +		psc at 2200 {
> +			status = "disabled";
> +		};
>  
>  		psc at 2400 { /* PSC3 in UART mode */
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2400 0x100>;
> -			interrupts = <2 3 0>;
>  		};
>  
>  		/* PSC4 is ??? */
> +		psc at 2600 {
> +			status = "disabled";
> +		};
>  
>  		/* PSC5 is ??? */
> +		psc at 2800 {
> +			status = "disabled";
> +		};
>  
>  		psc at 2c00 { /* PSC6 in UART mode */
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2c00 0x100>;
> -			interrupts = <2 4 0>;
> -		};
> -
> -		ethernet at 3000 {
> -			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> -			reg = <0x3000 0x400>;
> -			local-mac-address = [ 00 00 00 00 00 00 ];
> -			interrupts = <2 5 0>;
> -			phy-handle = <&phy0>;
>  		};
>  
>  		mdio at 3000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> -			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
> -			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
> -
>  			phy0: ethernet-phy at 0 {
>  				reg = <0>;
>  			};
>  		};
>  
> -		ata at 3a00 {
> -			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> -			reg = <0x3a00 0x100>;
> -			interrupts = <2 7 0>;
> -		};
> -
> -		i2c at 3d00 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> -			reg = <0x3d00 0x40>;
> -			interrupts = <2 15 0>;
> -		};
> -
>  		i2c at 3d40 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> -			reg = <0x3d40 0x40>;
> -			interrupts = <2 16 0>;
>  			rtc at 51 {
>  				compatible = "nxp,pcf8563";
>  				reg = <0x51>;
> @@ -259,20 +104,9 @@
>  				reg = <0x52>;
>  			};
>  		};
> -
> -		sram at 8000 {
> -			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> -			reg = <0x8000 0x4000>;
> -		};
>  	};
>  
>  	pci at f0000d00 {
> -		#interrupt-cells = <1>;
> -		#size-cells = <2>;
> -		#address-cells = <3>;
> -		device_type = "pci";
> -		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
> -		reg = <0xf0000d00 0x100>;
>  		interrupt-map-mask = <0xf800 0 0 7>;
>  		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
>  				 0xc000 0 0 2 &mpc5200_pic 1 1 3
> @@ -283,20 +117,12 @@
>  				 0xc800 0 0 2 &mpc5200_pic 1 2 3
>  				 0xc800 0 0 3 &mpc5200_pic 1 3 3
>  				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
> -		clock-frequency = <0>; // From boot loader
> -		interrupts = <2 8 0 2 9 0 2 10 0>;
> -		bus-range = <0 0>;
>  		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
>  			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
>  			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
>  	};
>  
>  	localbus {
> -		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> -
> -		#address-cells = <2>;
> -		#size-cells = <1>;
> -
>  		ranges = <0 0 0xfe000000 0x02000000
>  			  1 0 0xfc000000 0x02000000
>  			  2 0 0xfbe00000 0x00200000
> @@ -385,4 +211,3 @@
>                   */
>  	};
>  };
> -
> diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
> index e00441a..49be562 100644
> --- a/arch/powerpc/boot/dts/uc101.dts
> +++ b/arch/powerpc/boot/dts/uc101.dts
> @@ -11,79 +11,24 @@
>   * option) any later version.
>   */
>  
> -/dts-v1/;
> +/include/ "mpc5200b.dtsi"
>  
>  / {
>  	model = "manroland,uc101";
>  	compatible = "manroland,uc101";
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -	interrupt-parent = <&mpc5200_pic>;
> -
> -	cpus {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		PowerPC,5200 at 0 {
> -			device_type = "cpu";
> -			reg = <0>;
> -			d-cache-line-size = <32>;
> -			i-cache-line-size = <32>;
> -			d-cache-size = <0x4000>;	// L1, 16K
> -			i-cache-size = <0x4000>;	// L1, 16K
> -			timebase-frequency = <0>;	// from bootloader
> -			bus-frequency = <0>;		// from bootloader
> -			clock-frequency = <0>;		// from bootloader
> -		};
> -	};
> -
> -	memory {
> -		device_type = "memory";
> -		reg = <0x00000000 0x04000000>;	// 64MB
> -	};
>  
>  	soc5200 at f0000000 {
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		compatible = "fsl,mpc5200b-immr";
> -		ranges = <0 0xf0000000 0x0000c000>;
> -		reg = <0xf0000000 0x00000100>;
> -		bus-frequency = <0>;		// from bootloader
> -		system-frequency = <0>;		// from bootloader
> -
> -		cdm at 200 {
> -			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> -			reg = <0x200 0x38>;
> -		};
> -
> -		mpc5200_pic: interrupt-controller at 500 {
> -			// 5200 interrupts are encoded into two levels;
> -			interrupt-controller;
> -			#interrupt-cells = <3>;
> -			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> -			reg = <0x500 0x80>;
> -		};
> -
>  		gpt0: timer at 600 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x600 0x10>;
> -			interrupts = <1 9 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt1: timer at 610 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x610 0x10>;
> -			interrupts = <1 10 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt2: timer at 620 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x620 0x10>;
> -			interrupts = <1 11 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
> @@ -97,118 +42,81 @@
>  		};
>  
>  		gpt4: timer at 640 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x640 0x10>;
> -			interrupts = <1 13 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt5: timer at 650 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x650 0x10>;
> -			interrupts = <1 14 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt6: timer at 660 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x660 0x10>;
> -			interrupts = <1 15 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
>  		gpt7: timer at 670 {	// General Purpose Timer in GPIO mode
> -			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> -			reg = <0x670 0x10>;
> -			interrupts = <1 16 0>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  		};
>  
> -		gpio_simple: gpio at b00 {
> -			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> -			reg = <0xb00 0x40>;
> -			interrupts = <1 7 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> +		rtc at 800 {
> +			status = "disabled";
>  		};
>  
> -		gpio_wkup: gpio at c00 {
> -			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> -			reg = <0xc00 0x40>;
> -			interrupts = <1 8 0 0 3 0>;
> -			gpio-controller;
> -			#gpio-cells = <2>;
> +		can at 900 {
> +			status = "disabled";
>  		};
>  
> -		dma-controller at 1200 {
> -			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> -			reg = <0x1200 0x80>;
> -			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> -			              3 4 0  3 5 0  3 6 0  3 7 0
> -			              3 8 0  3 9 0  3 10 0  3 11 0
> -			              3 12 0  3 13 0  3 14 0  3 15 0>;
> +		can at 980 {
> +			status = "disabled";
>  		};
>  
> -		xlb at 1f00 {
> -			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> -			reg = <0x1f00 0x100>;
> +		spi at f00 {
> +			status = "disabled";
>  		};
>  
> -		psc at 2000 { /* PSC1 in UART mode */
> -			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2000 0x100>;
> -			interrupts = <2 1 0>;
> +		usb at 1000 {
> +			status = "disabled";
>  		};
>  
> -		psc at 2200 { /* PSC2 in UART mode */
> +		psc at 2000 {	// PSC1
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2200 0x100>;
> -			interrupts = <2 2 0>;
>  		};
>  
> -		psc at 2c00 {		/* PSC6 in UART mode */
> +		psc at 2200 {	// PSC2
>  			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> -			reg = <0x2c00 0x100>;
> -			interrupts = <2 4 0>;
>  		};
>  
> -		ethernet at 3000 {
> -			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> -			reg = <0x3000 0x400>;
> -			local-mac-address = [ 00 00 00 00 00 00 ];
> -			interrupts = <2 5 0>;
> -			phy-handle = <&phy0>;
> +		psc at 2400 {	// PSC3
> +			status = "disabled";
>  		};
>  
> -		mdio at 3000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> -			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
> -			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
> +		psc at 2600 {	// PSC4
> +			status = "disabled";
> +		};
> +
> +		psc at 2800 {	// PSC5
> +			status = "disabled";
> +		};
>  
> +		psc at 2c00 {	// PSC6
> +			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> +		};
> +
> +		mdio at 3000 {
>  			phy0: ethernet-phy at 0 {
>  				compatible = "intel,lxt971";
>  				reg = <0>;
>  			};
>  		};
>  
> -		ata at 3a00 {
> -			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> -			reg = <0x3a00 0x100>;
> -			interrupts = <2 7 0>;
> +		i2c at 3d00 {
> +			status = "disabled";
>  		};
>  
>  		i2c at 3d40 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> -			reg = <0x3d40 0x40>;
> -			interrupts = <2 16 0>;
>  			fsl,preserve-clocking;
>  			clock-frequency = <400000>;
>  
> @@ -221,19 +129,13 @@
>  				reg = <0x51>;
>  			};
>  		};
> +	};
>  
> -		sram at 8000 {
> -			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> -			reg = <0x8000 0x4000>;
> -		};
> +	pci at f0000d00 {
> +		status = "disabled";
>  	};
>  
>  	localbus {
> -		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
> -
> -		#address-cells = <2>;
> -		#size-cells = <1>;
> -
>  		ranges = <0 0 0xff800000 0x00800000
>  			  1 0 0x80000000 0x00800000
>  			  3 0 0x80000000 0x00800000>;
> 


More information about the Linuxppc-dev mailing list