[PATCH][v2] driver/FSL SATA:Fix wrong Device Error Register usage

[Prabhakar Kushwaha]

When a single device error is detected, the device under the error is indicated
by the error bit set in the DER. There is a one to one mapping between register
bit and devices on Port multiplier(PMP) i.e. bit 0 represents PMP device 0 and
bit 1 represents PMP device 1 etc.

Current implementation treats Device error register value as device number not
set of bits representing multiple device on PMP. It is changed to consider bit
level.
No need to check for each set bit as all command is going to be aborted.

Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Signed-off-by: Ashish Kalra <B00888 at freescale.com>
---
 git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git (branch master)

 Changes for v1: Incorporated David Laight's comment
 	- Single usage of ffs()

 Changes for v2: Incorporated David Laight's comment
 	- Changed type of dev_num to unsigned

 drivers/ata/sata_fsl.c |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index b0214d0..895771c 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1040,12 +1040,14 @@ static void sata_fsl_error_intr(struct ata_port *ap)
 
 		/* find out the offending link and qc */
 		if (ap->nr_pmp_links) {
+			unsigned int dev_num;
 			dereg = ioread32(hcr_base + DE);
 			iowrite32(dereg, hcr_base + DE);
 			iowrite32(cereg, hcr_base + CE);
 
-			if (dereg < ap->nr_pmp_links) {
-				link = &ap->pmp_link[dereg];
+			dev_num = ffs(dereg)-1;
+			if (dev_num < ap->nr_pmp_links) {
+				link = &ap->pmp_link[dev_num];
 				ehi = &link->eh_info;
 				qc = ata_qc_from_tag(ap, link->active_tag);
 				/*
-- 
1.7.3