[PATCH] driver/FSL SATA:Fix wrong Device Error Register usage

[Prabhakar Kushwaha]

When a single device error is detected, the device under the error is indicated
by the error bit set in the DER. There is a one to one mapping between register
bit and devices on Port multiplier(PMP) i.e. bit 0 represents PMP device 0 and
bit 1 represents PMP device 1 etc.

Current implementation treats Device error register value as device number not
set of bits representing multiple device on PMP. It is changed to consider bit
level.
No need to check for each set bit as all command is going to be aborted.

Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Signed-off-by: Ashish Kalra <B00888 at freescale.com>
---
 git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git (branch master)

 drivers/ata/sata_fsl.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 2546f38..8ad335f 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1047,8 +1047,9 @@ static void sata_fsl_error_intr(struct ata_port *ap)
 			iowrite32(dereg, hcr_base + DE);
 			iowrite32(cereg, hcr_base + CE);
 
-			if (dereg < ap->nr_pmp_links) {
-				link = &ap->pmp_link[dereg];
+			if ((ffs(dereg)-1) < ap->nr_pmp_links) {
+				/* array start from 0 */
+				link = &ap->pmp_link[ffs(dereg)-1];
 				ehi = &link->eh_info;
 				qc = ata_qc_from_tag(ap, link->active_tag);
 				/*
-- 
1.7.3