[PATCH 02/10] USB/ppc4xx: Add Synopsys DWC OTG driver framework

tmarri at apm.com tmarri at apm.com
Tue Feb 8 09:48:22 EST 2011


From: Tirumala Marri <tmarri at apm.com>

Platform probing is in dwc_otg_apmppc.c.
Driver parameter and parameter checking are in dwc_otg_param.c.

Signed-off-by: Tirumala R Marri <tmarri at apm.com>
Signed-off-by: Fushen Chen <fchen at apm.com>
Signed-off-by: Mark Miesfeld <mmiesfeld at apm.com>
---
 drivers/usb/otg/dwc/apmppc.c |  414 ++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/otg/dwc/driver.h |   76 ++++++++
 drivers/usb/otg/dwc/param.c  |  180 ++++++++++++++++++
 3 files changed, 670 insertions(+), 0 deletions(-)
 create mode 100644 drivers/usb/otg/dwc/apmppc.c
 create mode 100644 drivers/usb/otg/dwc/driver.h
 create mode 100644 drivers/usb/otg/dwc/param.c

diff --git a/drivers/usb/otg/dwc/apmppc.c b/drivers/usb/otg/dwc/apmppc.c
new file mode 100644
index 0000000..f5cfebd
--- /dev/null
+++ b/drivers/usb/otg/dwc/apmppc.c
@@ -0,0 +1,414 @@
+/*
+ * DesignWare HS OTG controller driver
+ * Copyright (C) 2006 Synopsys, Inc.
+ * Portions Copyright (C) 2010 Applied Micro Circuits Corporation.
+ *
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see http://www.gnu.org/licenses
+ * or write to the Free Software Foundation, Inc., 51 Franklin Street,
+ * Suite 500, Boston, MA 02110-1335 USA.
+ *
+ * Based on Synopsys driver version 2.60a
+ * Modified by Mark Miesfeld <mmiesfeld at apm.com>
+ * Modified by Stefan Roese <sr at denx.de>, DENX Software Engineering
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL SYNOPSYS, INC. BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * The dwc_otg module provides the initialization and cleanup entry
+ * points for the dwcotg driver. This module will be dynamically installed
+ * after Linux is booted using the insmod command. When the module is
+ * installed, the dwc_otg_driver_init function is called. When the module is
+ * removed (using rmmod), the dwc_otg_driver_cleanup function is called.
+ *
+ * This module also defines a data structure for the dwc_otg driver, which is
+ * used in conjunction with the standard device structure. These
+ * structures allow the OTG driver to comply with the standard Linux driver
+ * model in which devices and drivers are registered with a bus driver. This
+ * has the benefit that Linux can expose attributes of the driver and device
+ * in its special sysfs file system. Users can then read or write files in
+ * this file system to perform diagnostics on the driver components or the
+ * device.
+ */
+
+#include <linux/of_platform.h>
+
+#include "driver.h"
+
+#define DWC_DRIVER_VERSION		"1.05"
+#define DWC_DRIVER_DESC			"HS OTG USB Controller driver"
+static const char dwc_driver_name[] = "dwc_otg";
+
+/**
+ * This function is the top level interrupt handler for the Common
+ * (Device and host modes) interrupts.
+ */
+static irqreturn_t dwc_otg_common_irq(int _irq, void *dev)
+{
+	struct dwc_otg_device *dwc_dev = dev;
+	int retval;
+
+	retval = dwc_otg_handle_common_intr(dwc_dev->core_if);
+	return IRQ_RETVAL(retval);
+}
+
+/**
+ * This function is the interrupt handler for the OverCurrent condition
+ * from the external charge pump (if enabled)
+ */
+static irqreturn_t dwc_otg_externalchgpump_irq(int _irq, void *dev)
+{
+	struct dwc_otg_device *dwc_dev = dev;
+
+	if (dwc_otg_is_host_mode(dwc_dev->core_if)) {
+		struct dwc_hcd *dwc_hcd;
+		u32 hprt0 = 0;
+
+		dwc_hcd = dwc_dev->hcd;
+		spin_lock(&dwc_hcd->lock);
+		dwc_hcd->flags.b.port_over_current_change = 1;
+
+		hprt0 = DWC_HPRT0_PRT_PWR_RW(hprt0, 0);
+		dwc_write32(dwc_dev->core_if->host_if->hprt0, hprt0);
+		spin_unlock(&dwc_hcd->lock);
+	} else {
+		/* Device mode - This int is n/a for device mode */
+		dev_dbg(dev, "DeviceMode: OTG OverCurrent Detected\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * This function is called when a device is unregistered with the
+ * dwc_otg_driver. This happens, for example, when the rmmod command is
+ * executed. The device may or may not be electrically present. If it is
+ * present, the driver stops device processing. Any resources used on behalf
+ * of this device are freed.
+ */
+static int __devexit dwc_otg_driver_remove(struct platform_device *ofdev)
+{
+	struct device *dev = &ofdev->dev;
+	struct dwc_otg_device *dwc_dev = dev_get_drvdata(dev);
+
+	/* Memory allocation for dwc_otg_device may have failed. */
+	if (!dwc_dev)
+		return 0;
+
+	/* Free the IRQ */
+	if (dwc_dev->common_irq_installed)
+		free_irq(dwc_dev->irq, dwc_dev);
+
+	if (!dwc_has_feature(dwc_dev->core_if, DWC_DEVICE_ONLY)) {
+		if (dwc_dev->hcd) {
+			if (dwc_dev->hcd->cp_irq_installed)
+				free_irq(dwc_dev->hcd->cp_irq, dwc_dev);
+			dwc_otg_hcd_remove(dev);
+		}
+	}
+
+	if (!dwc_has_feature(dwc_dev->core_if, DWC_HOST_ONLY)) {
+		if (dwc_dev->pcd)
+			dwc_otg_pcd_remove(dev);
+	}
+
+	if (dwc_dev->core_if)
+		dwc_otg_cil_remove(dwc_dev->core_if);
+
+	/* Return the memory. */
+	if (dwc_dev->base)
+		iounmap(dwc_dev->base);
+
+	if (dwc_dev->phys_addr)
+		release_mem_region(dwc_dev->phys_addr, dwc_dev->base_len);
+
+	if (dwc_dev->core_if->xceiv) {
+		otg_put_transceiver(dwc_dev->core_if->xceiv);
+		dwc_dev->core_if->xceiv = NULL;
+		usb_nop_xceiv_unregister();
+	}
+
+	kfree(dwc_dev);
+
+	/* Clear the drvdata pointer. */
+	dev_set_drvdata(dev, NULL);
+	return 0;
+}
+
+/**
+ * This function is called when an device is bound to a
+ * dwc_otg_driver. It creates the driver components required to
+ * control the device (CIL, HCD, and PCD) and it initializes the
+ * device. The driver components are stored in a dwc_otg_device
+ * structure. A reference to the dwc_otg_device is saved in the
+ * device. This allows the driver to access the dwc_otg_device
+ * structure on subsequent calls to driver methods for this device.
+ */
+static int __devinit dwc_otg_driver_probe(struct platform_device *ofdev,
+					  const struct of_device_id *match)
+{
+	int retval;
+	struct dwc_otg_device *dwc_dev;
+	struct device *dev = &ofdev->dev;
+	struct resource res;
+	u32 gusbcfg_addr;
+	u32 usbcfg = 0;
+
+	dev_dbg(dev, "dwc_otg_driver_probe(%p)\n", dev);
+
+	dwc_dev = kzalloc(sizeof(*dwc_dev), GFP_KERNEL);
+	if (!dwc_dev) {
+		dev_err(dev, "kmalloc of dwc_otg_device failed\n");
+		retval = -ENOMEM;
+		goto fail_dwc_dev;
+	}
+
+	/* Retrieve the memory and IRQ resources. */
+	dwc_dev->irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
+	if (dwc_dev->irq == NO_IRQ) {
+		dev_err(dev, "no device irq\n");
+		retval = -ENODEV;
+		goto fail_of_irq;
+	}
+	dev_dbg(dev, "OTG - device irq: %d\n", dwc_dev->irq);
+
+	if (of_address_to_resource(ofdev->dev.of_node, 0, &res)) {
+		dev_err(dev, "%s: Can't get USB-OTG register address\n",
+			__func__);
+		retval = -ENOMEM;
+		goto fail_of_irq;
+	}
+	dev_dbg(dev, "OTG - ioresource_mem start0x%llx: end:0x%llx\n",
+		(unsigned long long)res.start, (unsigned long long)res.end);
+
+	dwc_dev->phys_addr = res.start;
+	dwc_dev->base_len = res.end - res.start + 1;
+	if (!request_mem_region(dwc_dev->phys_addr,
+				dwc_dev->base_len, dwc_driver_name)) {
+		dev_err(dev, "request_mem_region failed\n");
+		retval = -EBUSY;
+		goto fail_of_irq;
+	}
+
+	/* Map the DWC_otg Core memory into virtual address space. */
+	dwc_dev->base = ioremap(dwc_dev->phys_addr, dwc_dev->base_len);
+	if (!dwc_dev->base) {
+		dev_err(dev, "ioremap() failed\n");
+		retval = -ENOMEM;
+		goto fail_ioremap;
+	}
+	dev_dbg(dev, "mapped base=0x%08x\n", (__force u32)dwc_dev->base);
+
+	/*
+	 * Initialize driver data to point to the global DWC_otg
+	 * Device structure.
+	 */
+	dev_set_drvdata(dev, dwc_dev);
+
+	dwc_dev->core_if =
+	    dwc_otg_cil_init(dwc_dev->base, &dwc_otg_module_params);
+	if (!dwc_dev->core_if) {
+		dev_err(dev, "CIL initialization failed!\n");
+		retval = -ENOMEM;
+		goto fail_cil_init;
+	}
+
+	/*
+	 * Validate parameter values after dwc_otg_cil_init.
+	 */
+	if (check_parameters(dwc_dev->core_if)) {
+		retval = -EINVAL;
+		goto fail_check_param;
+	}
+
+	usb_nop_xceiv_register();
+	dwc_dev->core_if->xceiv = otg_get_transceiver();
+	if (!dwc_dev->core_if->xceiv) {
+		retval = -ENODEV;
+		goto fail_xceiv;
+	}
+	dwc_set_feature(dwc_dev->core_if);
+
+	/* Initialize the DWC_otg core. */
+	dwc_otg_core_init(dwc_dev->core_if);
+
+	/*
+	 * Disable the global interrupt until all the interrupt
+	 * handlers are installed.
+	 */
+	dwc_otg_disable_global_interrupts(dwc_dev->core_if);
+
+	/*
+	 * Install the interrupt handler for the common interrupts before
+	 * enabling common interrupts in core_init below.
+	 */
+	retval = request_irq(dwc_dev->irq, dwc_otg_common_irq,
+			     IRQF_SHARED, "dwc_otg", dwc_dev);
+	if (retval) {
+		dev_err(dev, "request of irq%d failed retval: %d\n",
+			dwc_dev->irq, retval);
+		retval = -EBUSY;
+		goto fail_req_irq;
+	} else {
+		dwc_dev->common_irq_installed = 1;
+	}
+
+	if (!dwc_has_feature(dwc_dev->core_if, DWC_HOST_ONLY)) {
+		/* Initialize the PCD */
+		retval = dwc_otg_pcd_init(dev);
+		if (retval) {
+			dev_err(dev, "dwc_otg_pcd_init failed\n");
+			dwc_dev->pcd = NULL;
+			goto fail_req_irq;
+		}
+	}
+
+	gusbcfg_addr = (u32) (dwc_dev->core_if->core_global_regs) + DWC_GUSBCFG;
+	if (!dwc_has_feature(dwc_dev->core_if, DWC_DEVICE_ONLY)) {
+		/* Initialize the HCD and force_host_mode */
+		usbcfg = dwc_read32(gusbcfg_addr);
+		usbcfg |= DWC_USBCFG_FRC_HST_MODE;
+		dwc_write32(gusbcfg_addr, usbcfg);
+
+		retval = dwc_otg_hcd_init(dev, dwc_dev);
+		if (retval) {
+			dev_err(dev, "dwc_otg_hcd_init failed\n");
+			dwc_dev->hcd = NULL;
+			goto fail_hcd;
+		}
+		/* configure chargepump interrupt */
+		dwc_dev->hcd->cp_irq = irq_of_parse_and_map(ofdev->dev.of_node,
+							    3);
+		if (dwc_dev->hcd->cp_irq) {
+			retval = request_irq(dwc_dev->hcd->cp_irq,
+					     dwc_otg_externalchgpump_irq,
+					     IRQF_SHARED,
+					     "dwc_otg_ext_chg_pump", dwc_dev);
+			if (retval) {
+				dev_err(dev,
+					"request of irq failed retval: %d\n",
+					retval);
+				retval = -EBUSY;
+				goto fail_hcd;
+			} else {
+				dev_dbg(dev, "%s: ExtChgPump Detection "
+					"IRQ registered\n", dwc_driver_name);
+				dwc_dev->hcd->cp_irq_installed = 1;
+			}
+		}
+	}
+	/*
+	 * Enable the global interrupt after all the interrupt
+	 * handlers are installed.
+	 */
+	dwc_otg_enable_global_interrupts(dwc_dev->core_if);
+
+	usbcfg = dwc_read32(gusbcfg_addr);
+	usbcfg &= ~DWC_USBCFG_FRC_HST_MODE;
+	dwc_write32(gusbcfg_addr, usbcfg);
+
+	return 0;
+fail_hcd:
+	free_irq(dwc_dev->irq, dwc_dev);
+	if (!dwc_has_feature(dwc_dev->core_if, DWC_HOST_ONLY)) {
+		if (dwc_dev->pcd)
+			dwc_otg_pcd_remove(dev);
+	}
+fail_req_irq:
+	otg_put_transceiver(dwc_dev->core_if->xceiv);
+fail_xceiv:
+	usb_nop_xceiv_unregister();
+fail_check_param:
+	dwc_otg_cil_remove(dwc_dev->core_if);
+fail_cil_init:
+	dev_set_drvdata(dev, NULL);
+	iounmap(dwc_dev->base);
+fail_ioremap:
+	release_mem_region(dwc_dev->phys_addr, dwc_dev->base_len);
+fail_of_irq:
+	kfree(dwc_dev);
+fail_dwc_dev:
+	return retval;
+}
+
+/*
+ * This structure defines the methods to be called by a bus driver
+ * during the lifecycle of a device on that bus. Both drivers and
+ * devices are registered with a bus driver. The bus driver matches
+ * devices to drivers based on information in the device and driver
+ * structures.
+ *
+ * The probe function is called when the bus driver matches a device
+ * to this driver. The remove function is called when a device is
+ * unregistered with the bus driver.
+ */
+static const struct of_device_id dwc_otg_match[] = {
+	{.compatible = "amcc,dwc-otg",},
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, dwc_otg_match);
+
+static struct of_platform_driver dwc_otg_driver = {
+	.probe = dwc_otg_driver_probe,
+	.remove = __devexit_p(dwc_otg_driver_remove),
+	.driver = {
+		   .name = "dwc_otg",
+		   .owner = THIS_MODULE,
+		   .of_match_table = dwc_otg_match,
+		   },
+};
+
+/**
+ * This function is called when the dwc_otg_driver is installed with the
+ * insmod command. It registers the dwc_otg_driver structure with the
+ * appropriate bus driver. This will cause the dwc_otg_driver_probe function
+ * to be called. In addition, the bus driver will automatically expose
+ * attributes defined for the device and driver in the special sysfs file
+ * system.
+ */
+static int __init dwc_otg_driver_init(void)
+{
+
+	pr_info("%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION);
+	return of_register_platform_driver(&dwc_otg_driver);
+}
+
+module_init(dwc_otg_driver_init);
+
+/**
+ * This function is called when the driver is removed from the kernel
+ * with the rmmod command. The driver unregisters itself with its bus
+ * driver.
+ *
+ */
+static void __exit dwc_otg_driver_cleanup(void)
+{
+	of_unregister_platform_driver(&dwc_otg_driver);
+}
+
+module_exit(dwc_otg_driver_cleanup);
+
+MODULE_DESCRIPTION(DWC_DRIVER_DESC);
+MODULE_AUTHOR("Mark Miesfeld <mmiesfeld at apm.com");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/otg/dwc/driver.h b/drivers/usb/otg/dwc/driver.h
new file mode 100644
index 0000000..a86532b
--- /dev/null
+++ b/drivers/usb/otg/dwc/driver.h
@@ -0,0 +1,76 @@
+/*
+ * DesignWare HS OTG controller driver
+ * Copyright (C) 2006 Synopsys, Inc.
+ * Portions Copyright (C) 2010 Applied Micro Circuits Corporation.
+ *
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see http://www.gnu.org/licenses
+ * or write to the Free Software Foundation, Inc., 51 Franklin Street,
+ * Suite 500, Boston, MA 02110-1335 USA.
+ *
+ * Based on Synopsys driver version 2.60a
+ * Modified by Mark Miesfeld <mmiesfeld at apm.com>
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL SYNOPSYS, INC. BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#if !defined(__DWC_OTG_DRIVER_H__)
+#define __DWC_OTG_DRIVER_H__
+
+/*
+ * This file contains the interface to the Linux driver.
+ */
+#include "cil.h"
+
+/*
+ * This structure is a wrapper that encapsulates the driver components used to
+ * manage a single DWC_otg controller.
+ */
+struct dwc_otg_device {
+	/* Base address returned from ioremap() */
+	__iomem void *base;
+
+	/* Pointer to the core interface structure. */
+	struct core_if *core_if;
+
+	/* Pointer to the PCD structure. */
+	struct dwc_pcd *pcd;
+
+	/* Pointer to the HCD structure. */
+	struct dwc_hcd *hcd;
+
+	/* Flag to indicate whether the common IRQ handler is installed. */
+	u8 common_irq_installed;
+
+	/* Interrupt request number. */
+	unsigned int irq;
+
+	/*
+	 * Physical address of Control and Status registers, used by
+	 * release_mem_region().
+	 */
+	resource_size_t phys_addr;
+
+	/* Length of memory region, used by release_mem_region(). */
+	unsigned long base_len;
+};
+#endif
diff --git a/drivers/usb/otg/dwc/param.c b/drivers/usb/otg/dwc/param.c
new file mode 100644
index 0000000..115b4d5
--- /dev/null
+++ b/drivers/usb/otg/dwc/param.c
@@ -0,0 +1,180 @@
+/*
+ * DesignWare HS OTG controller driver
+ * Copyright (C) 2006 Synopsys, Inc.
+ * Portions Copyright (C) 2010 Applied Micro Circuits Corporation.
+ *
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see http://www.gnu.org/licenses
+ * or write to the Free Software Foundation, Inc., 51 Franklin Street,
+ * Suite 500, Boston, MA 02110-1335 USA.
+ *
+ * Based on Synopsys driver version 2.60a
+ * Modified by Mark Miesfeld <mmiesfeld at apm.com>
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL SYNOPSYS, INC. BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * This file provides dwc_otg driver parameter and parameter checking.
+ */
+
+#include "cil.h"
+
+/*
+ * Encapsulate the module parameter settings
+ */
+struct core_params dwc_otg_module_params = {
+	.otg_cap = -1,
+	.dma_enable = -1,
+	.dma_burst_size = -1,
+	.speed = -1,
+	.host_support_fs_ls_low_power = -1,
+	.host_ls_low_power_phy_clk = -1,
+	.enable_dynamic_fifo = -1,
+	.dev_rx_fifo_size = -1,
+	.dev_nperio_tx_fifo_size = -1,
+	.dev_perio_tx_fifo_size = {-1, -1, -1, -1, -1, -1, -1, -1,
+		-1, -1, -1, -1, -1, -1, -1},	/* 15 */
+	.host_rx_fifo_size = -1,
+	.host_nperio_tx_fifo_size = -1,
+	.host_perio_tx_fifo_size = -1,
+	.max_transfer_size = -1,
+	.max_packet_count = -1,
+	.host_channels = -1,
+	.dev_endpoints = -1,
+	.phy_type = -1,
+	.phy_utmi_width = -1,
+	.phy_ulpi_ddr = -1,
+	.phy_ulpi_ext_vbus = -1,
+	.i2c_enable = -1,
+	.ulpi_fs_ls = -1,
+	.ts_dline = -1,
+	.en_multiple_tx_fifo = -1,
+	.dev_tx_fifo_size = {-1, -1, -1, -1, -1, -1, -1, -1, -1,
+		-1, -1, -1, -1, -1, -1},	/* 15 */
+	.thr_ctl = -1,
+	.tx_thr_length = -1,
+	.rx_thr_length = -1,
+};
+
+/**
+ * Checks that parameter settings for the periodic Tx FIFO sizes are correct
+ * according to the hardware configuration. Sets the size to the hardware
+ * configuration if an incorrect size is detected.
+ */
+static int set_valid_perio_tx_fifo_sizes(struct core_if *core_if)
+{
+	u32 regs = (u32) core_if->core_global_regs;
+	u32 *param_size = &dwc_otg_module_params.dev_perio_tx_fifo_size[0];
+	u32 i, size;
+
+	for (i = 0; i < MAX_PERIO_FIFOS; i++, param_size++) {
+		size = dwc_read32(regs + DWC_DPTX_FSIZ_DIPTXF(i));
+		*param_size = size;
+	}
+	return 0;
+}
+
+/**
+ * Checks that parameter settings for the Tx FIFO sizes are correct according to
+ * the hardware configuration.  Sets the size to the hardware configuration if
+ * an incorrect size is detected.
+ */
+static int set_valid_tx_fifo_sizes(struct core_if *core_if)
+{
+	u32 regs = (u32) core_if->core_global_regs;
+	u32 *param_size = &dwc_otg_module_params.dev_tx_fifo_size[0];
+	u32 i, size;
+
+	for (i = 0; i < MAX_TX_FIFOS; i++, param_size) {
+		size = dwc_read32(regs + DWC_DPTX_FSIZ_DIPTXF(i));
+		*param_size = size;
+	}
+	return 0;
+}
+
+/**
+ * This function is called during module intialization to verify that
+ * the module parameters are in a valid state.
+ */
+int __devinit check_parameters(struct core_if *core_if)
+{
+	/* Default values */
+	dwc_otg_module_params.otg_cap = dwc_param_otg_cap_default;
+	dwc_otg_module_params.dma_enable = dwc_param_dma_enable_default;
+	dwc_otg_module_params.speed = dwc_param_speed_default;
+	dwc_otg_module_params.host_support_fs_ls_low_power =
+	    dwc_param_host_support_fs_ls_low_power_default;
+	dwc_otg_module_params.host_ls_low_power_phy_clk =
+	    dwc_param_host_ls_low_power_phy_clk_default;
+	dwc_otg_module_params.phy_type = dwc_param_phy_type_default;
+	dwc_otg_module_params.phy_ulpi_ddr = dwc_param_phy_ulpi_ddr_default;
+	dwc_otg_module_params.phy_ulpi_ext_vbus =
+	    dwc_param_phy_ulpi_ext_vbus_default;
+	dwc_otg_module_params.i2c_enable = dwc_param_i2c_enable_default;
+	dwc_otg_module_params.ulpi_fs_ls = dwc_param_ulpi_fs_ls_default;
+	dwc_otg_module_params.ts_dline = dwc_param_ts_dline_default;
+
+	dwc_otg_module_params.dma_burst_size = dwc_param_dma_burst_size_default;
+	dwc_otg_module_params.phy_utmi_width = dwc_param_phy_utmi_width_default;
+	dwc_otg_module_params.thr_ctl = dwc_param_thr_ctl_default;
+	dwc_otg_module_params.tx_thr_length = dwc_param_tx_thr_length_default;
+	dwc_otg_module_params.rx_thr_length = dwc_param_rx_thr_length_default;
+
+	/*
+	 * Hardware configurations of the OTG core.
+	 */
+	dwc_otg_module_params.enable_dynamic_fifo =
+	    DWC_HWCFG2_DYN_FIFO_RD(core_if->hwcfg2);
+	dwc_otg_module_params.dev_rx_fifo_size =
+	    dwc_read32((u32) core_if->core_global_regs + DWC_GRXFSIZ);
+	dwc_otg_module_params.dev_nperio_tx_fifo_size =
+	    dwc_read32((u32) core_if->core_global_regs + DWC_GNPTXFSIZ) >> 16;
+
+	dwc_otg_module_params.host_rx_fifo_size =
+	    dwc_read32((u32) core_if->core_global_regs + DWC_GRXFSIZ);
+	dwc_otg_module_params.host_nperio_tx_fifo_size =
+	    dwc_read32((u32) core_if->core_global_regs + DWC_GNPTXFSIZ) >> 16;
+	dwc_otg_module_params.host_perio_tx_fifo_size =
+	    dwc_read32((u32) core_if->core_global_regs + DWC_HPTXFSIZ) >> 16;
+	dwc_otg_module_params.max_transfer_size =
+	    (1 << (DWC_HWCFG3_XFERSIZE_CTR_WIDTH_RD(core_if->hwcfg3) + 11))
+	    - 1;
+	dwc_otg_module_params.max_packet_count =
+	    (1 << (DWC_HWCFG3_PKTSIZE_CTR_WIDTH_RD(core_if->hwcfg3) + 4))
+	    - 1;
+
+	dwc_otg_module_params.host_channels =
+	    DWC_HWCFG2_NO_HST_CHAN_RD(core_if->hwcfg2) + 1;
+	dwc_otg_module_params.dev_endpoints =
+	    DWC_HWCFG2_NO_DEV_EP_RD(core_if->hwcfg2);
+	dwc_otg_module_params.en_multiple_tx_fifo =
+	    (DWC_HWCFG4_DED_FIFO_ENA_RD(core_if->hwcfg4) == 0)
+	    ? 0 : 1, 0;
+	set_valid_perio_tx_fifo_sizes(core_if);
+	set_valid_tx_fifo_sizes(core_if);
+
+	return 0;
+}
+
+module_param_named(dma_enable, dwc_otg_module_params.dma_enable, bool, 0444);
+MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
-- 
1.6.1.rc3



More information about the Linuxppc-dev mailing list