[PATCH] net/ucc_geth: some fix in current kernel
Xie Xiaobo
X.Xie at freescale.com
Tue Dec 27 20:48:48 EST 2011
* Revert commit "ucc_geth: Fix hangs after switching from full to half duplex"
This commit impacted the driver in all link state change more than
duplex change.
* Change some parameters.
Increased the BD ring length.
Signed-off-by: Haiying Wang <Haiying.Wang at freescale.com>
Signed-off-by: Xie Xiaobo <X.Xie at freescale.com>
---
drivers/net/ethernet/freescale/ucc_geth.c | 41 ++++------------------------
drivers/net/ethernet/freescale/ucc_geth.h | 6 ++--
2 files changed, 9 insertions(+), 38 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index b5dc027..3e18902 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006-2009 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Shlomi Gridish <gridish at freescale.com>
* Li Yang <leoli at freescale.com>
@@ -1570,28 +1570,6 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
return 0;
}
-static void ugeth_quiesce(struct ucc_geth_private *ugeth)
-{
- /* Prevent any further xmits, plus detach the device. */
- netif_device_detach(ugeth->ndev);
-
- /* Wait for any current xmits to finish. */
- netif_tx_disable(ugeth->ndev);
-
- /* Disable the interrupt to avoid NAPI rescheduling. */
- disable_irq(ugeth->ug_info->uf_info.irq);
-
- /* Stop NAPI, and possibly wait for its completion. */
- napi_disable(&ugeth->napi);
-}
-
-static void ugeth_activate(struct ucc_geth_private *ugeth)
-{
- napi_enable(&ugeth->napi);
- enable_irq(ugeth->ug_info->uf_info.irq);
- netif_device_attach(ugeth->ndev);
-}
-
/* Called every time the controller might need to be made
* aware of new link state. The PHY code conveys this
* information through variables in the ugeth structure, and this
@@ -1605,11 +1583,14 @@ static void adjust_link(struct net_device *dev)
struct ucc_geth __iomem *ug_regs;
struct ucc_fast __iomem *uf_regs;
struct phy_device *phydev = ugeth->phydev;
+ unsigned long flags;
int new_state = 0;
ug_regs = ugeth->ug_regs;
uf_regs = ugeth->uccf->uf_regs;
+ spin_lock_irqsave(&ugeth->lock, flags);
+
if (phydev->link) {
u32 tempval = in_be32(&ug_regs->maccfg2);
u32 upsmr = in_be32(&uf_regs->upsmr);
@@ -1666,21 +1647,9 @@ static void adjust_link(struct net_device *dev)
}
if (new_state) {
- /*
- * To change the MAC configuration we need to disable
- * the controller. To do so, we have to either grab
- * ugeth->lock, which is a bad idea since 'graceful
- * stop' commands might take quite a while, or we can
- * quiesce driver's activity.
- */
- ugeth_quiesce(ugeth);
- ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
-
out_be32(&ug_regs->maccfg2, tempval);
out_be32(&uf_regs->upsmr, upsmr);
- ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
- ugeth_activate(ugeth);
}
} else if (ugeth->oldlink) {
new_state = 1;
@@ -1691,6 +1660,8 @@ static void adjust_link(struct net_device *dev)
if (new_state && netif_msg_link(ugeth))
phy_print_status(phydev);
+
+ spin_unlock_irqrestore(&ugeth->lock, flags);
}
/* Initialize TBI PHY interface for communicating with the
diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h
index d12fcad..b0b42b4 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.h
+++ b/drivers/net/ethernet/freescale/ucc_geth.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) Freescale Semicondutor, Inc. 2006-2009. All rights reserved.
+ * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Shlomi Gridish <gridish at freescale.com>
*
@@ -875,8 +875,8 @@ struct ucc_geth_hardware_statistics {
#define UCC_GETH_SIZE_OF_BD QE_SIZEOF_BD
/* Driver definitions */
-#define TX_BD_RING_LEN 0x10
-#define RX_BD_RING_LEN 0x10
+#define TX_BD_RING_LEN 64
+#define RX_BD_RING_LEN 64
#define TX_RING_MOD_MASK(size) (size-1)
#define RX_RING_MOD_MASK(size) (size-1)
--
1.7.5.1
More information about the Linuxppc-dev
mailing list