[PATCH 2/2 v2] mtd/nand: Add ONFI support for FSL NAND controller

[Scott Wood]

On 12/06/2011 02:54 AM, Shengzhou Liu wrote:
> diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
> index 4f405a0..b4db407 100644
> --- a/drivers/mtd/nand/fsl_elbc_nand.c
> +++ b/drivers/mtd/nand/fsl_elbc_nand.c
> @@ -349,19 +349,24 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
>  		fsl_elbc_run_command(mtd);
>  		return;
>  
> -	/* READID must read all 5 possible bytes while CEB is active */
>  	case NAND_CMD_READID:
> -		dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_READID.\n");
> +	case NAND_CMD_PARAM:
> +		dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD %x\n", command);
>  
>  		out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) |
>  		                    (FIR_OP_UA  << FIR_OP1_SHIFT) |
>  		                    (FIR_OP_RBW << FIR_OP2_SHIFT));
> -		out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT);
> -		/* nand_get_flash_type() reads 8 bytes of entire ID string */
> -		out_be32(&lbc->fbcr, 8);
> -		elbc_fcm_ctrl->read_bytes = 8;
> +		out_be32(&lbc->fcr, command << FCR_CMD0_SHIFT);
> +		/* reads 8 bytes of entire ID string */
> +		if (NAND_CMD_READID == command) {

if (command == NAND_CMD_READID) {

> +			out_be32(&lbc->fbcr, 8);
> +			elbc_fcm_ctrl->read_bytes = 8;
> +		} else {
> +			out_be32(&lbc->fbcr, 256);
> +			elbc_fcm_ctrl->read_bytes = 256;
> +		}

Any harm in always using 256?

-Scott