[PATCH 1/3] mtd/nand : use elbc_fcm_ctrl->oob to set FPAR_MS bit of FPAR

[Artem Bityutskiy]

On Sun, 2011-12-04 at 12:31 +0800, shuo.liu at freescale.com wrote:
> From: Liu Shuo <b35362 at freescale.com>
> 
> On both of large-page chip and small-page chip, we always should use
> 'elbc_fcm_ctrl->oob' to set the FPAR_LP_MS/FPAR_SP_MS bit of FPAR, don't
> use a overflowed 'column' to set it.
> 
> Signed-off-by: Liu Shuo <b35362 at freescale.com>
> Signed-off-by: Li Yang <leoli at freescale.com>

Pushed patches 1 and 2 to l2-mtd-2.6.git, thanks!

Artem.