[PATCH 08/14] dwc/otg: Add PCD function

[Sebastian Andrzej Siewior]

* Pratyush Anand | 2011-08-30 17:27:55 [+0530]:
>diff --git a/drivers/usb/dwc/pcd.c b/drivers/usb/dwc/pcd.c
>new file mode 100644
>index 0000000..2ef6405
>--- /dev/null
>+++ b/drivers/usb/dwc/pcd.c
>+static const struct usb_gadget_ops dwc_otg_pcd_ops = {
>+	.get_frame = dwc_otg_pcd_get_frame,
>+	.wakeup = dwc_otg_pcd_wakeup,

You may want to provide udc_start and udc_stop hooks.
drivers/usb/dwc3/gadget.c and drivers/usb/musb/musb_gadget.c are two
driver which are using it. The other gadget are using .start and .stop
hooks which I would like to go.

>+	/* not selfpowered */
>+};
>+
>+/**
>+ * This function registers a gadget driver with the PCD.
>+ *
>+ * When a driver is successfully registered, it will receive control
>+ * requests including set_configuration(), which enables non-control
>+ * requests.  then usb traffic follows until a disconnect is reported.
>+ * then a host may connect again, or the driver might get unbound.
>+ */
>+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
>+			    int (*bind) (struct usb_gadget *))

You can not provide usb_gadget_probe_driver() anymore. That is why you
need to provide those hooks I mentioned.

Sebastian