[PATCH v3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip

[LiuShuo]

于 2011年08月19日 01:00, Matthieu CASTET 写道:
> b35362 at freescale.com a écrit :
>> From: Liu Shuo<b35362 at freescale.com>
>>
>> Freescale FCM controller has a 2K size limitation of buffer RAM. In order
>> to support the Nand flash chip whose page size is larger than 2K bytes,
>> we divide a page into multi-2K pages for MTD layer driver. In that case,
>> we force to set the page size to 2K bytes. We convert the page address of
>> MTD layer driver to a real page address in flash chips and a column index
>> in fsl_elbc driver. We can issue any column address by UA instruction of
>> elbc controller.
>>
> Why do you need to do that ?
>
> When mtd send you a 4k page, why can't you write it by 2*2k pages write ?
1. It's easy to implement.
2. We don't need to move the data in buffer more times, because we
want to use the HW_ECC.

In flash chip per Page:
----------------------------------------------------------------
| first data | first oob | second data | second oob |
----------------------------------------------------------------

> Even better send the first 2K and then if your controller allow it send the
> remaining 2K without command/address phase.
The elbc controller don't allow that.
I have to send twice Program CMD for writing the whole 4KB data.

>
> Matthieu
>