[PATCH] mtd/nand: Don't add disabled nand flash devices

[Scott Wood]

On 08/16/2011 04:27 AM, Chunhe Lan wrote:
> Nand flash nodes with the property status="disabled" are not
> usable and so avoid adding "disabled" nand flash devices with
> the system.
> 
> Signed-off-by: Chunhe Lan <Chunhe.Lan at freescale.com>
> ---
>  drivers/mtd/nand/fsl_elbc_nand.c |    5 ++++-
>  1 files changed, 4 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
> index 33d8aad..8212c12 100644
> --- a/drivers/mtd/nand/fsl_elbc_nand.c
> +++ b/drivers/mtd/nand/fsl_elbc_nand.c
> @@ -1,6 +1,6 @@
>  /* Freescale Enhanced Local Bus Controller NAND driver
>   *
> - * Copyright © 2006-2007, 2010 Freescale Semiconductor
> + * Copyright © 2006-2007, 2010-2011 Freescale Semiconductor
>   *
>   * Authors: Nick Spence <nick.spence at freescale.com>,
>   *          Scott Wood <scottwood at freescale.com>
> @@ -849,6 +849,9 @@ static int __devinit fsl_elbc_nand_probe(struct platform_device *pdev)
>  	struct device *dev;
>  	struct device_node *node = pdev->dev.of_node;
>  
> +	if (!of_device_is_available(node))
> +		return -ENODEV;
> +
>  	if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
>  		return -ENODEV;
>  	lbc = fsl_lbc_ctrl_dev->regs;

Same comment as the other patch -- unavailable devices should already
not be getting probed.  Also, this subject line makes it sound like this
is a NAND subsystem change rather than a change in one specific driver.

-Scott