[PATCH] mtd-utils: fix corrupt cleanmarker with flash_erase -j command

[Artem Bityutskiy]

On Wed, 2011-08-03 at 13:50 +0800, b35362 at freescale.com wrote:
> From: Liu Shuo <b35362 at freescale.com>
> 
> Flash_erase -j should fill discrete freeoob areas with required bytes
> of JFFS2 cleanmarker in jffs2_check_nand_cleanmarker(). Not just fill
> the first freeoob area.
> 
> Signed-off-by: Liu Shuo <b35362 at freescale.com>
> Signed-off-by: Li Yang <leoli at freescale.com>

...

>  	/*
>  	 * Process user arguments
> @@ -197,15 +198,40 @@ int main(int argc, char *argv[])
>  			if (ioctl(fd, MEMGETOOBSEL, &oobinfo) != 0)
>  				return sys_errmsg("%s: unable to get NAND oobinfo", mtd_device);
>  
> +			cleanmarker.totlen = cpu_to_je32(8);
>  			/* Check for autoplacement */
>  			if (oobinfo.useecc == MTD_NANDECC_AUTOPLACE) {
> +				struct nand_ecclayout_user ecclayout;
>  				/* Get the position of the free bytes */
> -				if (!oobinfo.oobfree[0][1])
> +				if (ioctl(fd, ECCGETLAYOUT, &ecclayout) != 0)
> +					return sys_errmsg("%s: unable to get NAND ecclayout", mtd_device);
> +

Hmm, shouldn't we instead make MTD_OOB_AUTO be available for userspace
via an ioctl instead and make flash_eraseall use it instead?

-- 
Best Regards,
Artem Bityutskiy