[PATCH 5/5] [powerpc] Fix up fsl-flexcan device tree binding.

Wolfgang Grandegger wg at grandegger.com
Wed Aug 10 05:49:01 EST 2011


On 08/09/2011 09:13 PM, Scott Wood wrote:
> On 08/09/2011 01:45 PM, Robin Holt wrote:
>> On Tue, Aug 09, 2011 at 01:17:47PM -0500, Scott Wood wrote:
>>> On 08/09/2011 09:43 AM, Robin Holt wrote:
>>>> In working with the socketcan developers, we have come to the conclusion
>>>> the fsl-flexcan device tree bindings need to be cleaned up. 
>>>> The driver does not depend upon any properties other than the required properties
>>>> so we are removing the file.
>>>
>>> That is not the criterion for whether something should be expresed in
>>> the device tree.  It's a description of the hardware, not a Linux driver
>>> configuration file.  If there are integration parameters that can not be
>>> inferred from "this is FSL flexcan v1.0", they should be expressed in
>>> the node.
>>
>> There are no properties other than the required properties.  The others
>> were wrongly introduced and are not needed by the driver.
> 
> Not needed by this driver, or will never be needed by any reasonable
> driver (or is not a good description of the hardware)?
> 
> The device tree is not an internal Linux implementation detail.  It is
> shared by other OSes, firmwares, hypervisors, etc.  Bindings should be
> created with care, and kept stable unless there's a good reason to break
> compatibility.
> 
> devicetree-discuss at lists.ozlabs.org should be CCed on device tree
> discussions.

Yes. The doc for the bindings we speak about

http://lxr.linux.no/#linux+v3.0.1/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt

sneaked into the kernel without been presented on any mailing list and
without the corresponding driver patch.

>> When we
>> removed the other properties and the wrong documentation of the mscan
>> oscillator source in the fsl-flexcan.txt file, we were left with an
>> Example: section and a one-line statement "The only properties supported
>> are the required properties."  That seemed like the fsl-flexcan.txt
>> file was then pointless.
> 
> There is the compatible string, and you could mention that there is a
> single reg resource and a single interrupt.
> 
>>> Removing the binding altogether seems extreme as well -- we should have
>>> bindings for all devices, even if there are no special properties.
>>
>> Ok.  I can do that too.  Who is the definitive source for that answer?
> 
> For policy questions on device tree bindings?  Grant Likely is the
> maintainer for device tree stuff.
> 
> A lot of the simpler bindings have been left undocumented so far, IMHO
> it should be a goal to document them all.  There are some existing ones
> that are documented despite not having special properties, e.g.
> Documentation/devicetree/bindings/serio/altera_ps2.txt,
> Documentation/devicetree/bindings/arm/sirf.txt,
> Documentation/devicetree/bindings/powerpc/nintendo/wii.txt, etc.
> 
>> I assume we are talking about the fsl-flexcan.txt file when we say
>> binding.  Is that correct?
> 
> Yes, although devicetree.org is another possibility.
> 
>>>> Additionally, the p1010*dts files are not
>>>> following the standard for node naming in that they have a trailing -v1.0.
>>>
>>> What "standard for node naming"?  There's nothing wrong with putting a
>>
>> For the answer to that, you will need to ask Wolfgang Grandegger.  I was
>> working from his feedback.  Looking at the plethora of other node names,
>> the vast majority do not have any -v#.#, and the ones that do also tend
>> to have multiple versions. Based upon that, I suspect he is correct,
>> but I do not know where the documentation is or if it even exists.
> 
> There's a lot of crap in old bindings, plus it's not appropriate for all
> circumstances (specifying bindings should be done a little more
> carefully than "what do most other bindings do?").  It's something we've
> been doing lately for blocks that have a version number, but it's not
> dynamically readable.
> 
> Looking in the FlexCAN chapter of the p1010 manual, I don't see any
> reference to a block version, and I do see references to "previous
> FlexCAN versions".  So I suggest "fsl,p1010-flexcan".

OK, just

  "fsl,p1010-flexcan"

or

  "fsl,p1010-flexcan", "fsl,flexcan"


Note that the Flexcan is used on Freescale ARM cores as well (and device
tree for ARM will show up soon).

Wolfgang.


More information about the Linuxppc-dev mailing list