known working sata_sil24.c setup on powerpc platforms?

[Kushwaha Prabhakar-B32579]

Hi Leon,


> -----Original Message-----
> From: Leon Woestenberg [mailto:leon.woestenberg at gmail.com]
> Sent: Friday, April 08, 2011 1:55 PM
> To: Kushwaha Prabhakar-B32579
> Cc: Moffett, Kyle D; linux-ide at vger.kernel.org; Tejun Heo; Jeff Garzik;
> Linux PPC; Gupta Maneesh-B18878
> Subject: Re: known working sata_sil24.c setup on powerpc platforms?
> 
> Hello Prabhakar,
> 
> On Fri, Apr 8, 2011 at 5:44 AM, Kushwaha Prabhakar-B32579
> <B32579 at freescale.com> wrote:
> >> -----Original Message-----
> >> From: linux-ide-owner at vger.kernel.org [mailto:linux-ide-
> >> owner at vger.kernel.org] On Behalf Of Leon Woestenberg
> >> Sent: Thursday, April 07, 2011 10:23 PM
> >> To: Kushwaha Prabhakar-B32579
> >> Cc: Moffett, Kyle D; Linux PPC; linux-ide at vger.kernel.org; Tejun Heo;
> >> Jeff Garzik
> >> Subject: Re: known working sata_sil24.c setup on powerpc platforms?
> >>
> >> On Thu, Apr 7, 2011 at 6:48 AM, Kushwaha Prabhakar-B32579
> >> <B32579 at freescale.com> wrote:
> >> > Can you please check p2020rdb.dts for IDSEL entries for pci0/1 node?
> >> >
> >> > In order to work in legacy mode, IDSEL entries are required.
> >> >
> >> No, the p1020rdb and p2020rdb do not have the IDSEL entries:
> >> What would the correct IDSEL entries be?
> >
> > For legacy interrupt to work IDSEL values are required.. please find
> the correct IDSEL values for pci0/1.
> >
> >        pci0: pcie at ffe09000 {
> > ...
> > Please try with this.. I am in process of pushing these IDSEL values to
> upstream.
> >
> 
> Do you have these for P1020RDB  as well? I found a P1020RDB board that
> has the CE10 errata fixed, so IRQ0 is properly pulled up.
> 

  Same IDSEL values are valid for P1020RDB also.

--Prabhakar