[PATCH 3/3] mpc512x_dma: add MPC8308 support
Ilya Yanok
yanok at emcraft.com
Tue Sep 28 22:24:56 EST 2010
MPC8308 has pretty much the same DMA controller as MPC5121 and
this patch adds support for MPC8308 to the mpc512x_dma driver.
Signed-off-by: Ilya Yanok <yanok at emcraft.com>
Cc: Piotr Ziecik <kosmo at semihalf.com>
---
drivers/dma/Kconfig | 2 +-
drivers/dma/mpc512x_dma.c | 95 +++++++++++++++++++++++++++++++++-----------
2 files changed, 72 insertions(+), 25 deletions(-)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 9520cf0..5c5e95b 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -100,7 +100,7 @@ config FSL_DMA
config MPC512X_DMA
tristate "Freescale MPC512x built-in DMA engine support"
- depends on PPC_MPC512x
+ depends on PPC_MPC512x || PPC_MPC831x
select DMA_ENGINE
---help---
Enable support for the Freescale MPC512x built-in DMA engine.
diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
index 0717527..97b92ec 100644
--- a/drivers/dma/mpc512x_dma.c
+++ b/drivers/dma/mpc512x_dma.c
@@ -1,6 +1,7 @@
/*
* Copyright (C) Freescale Semicondutor, Inc. 2007, 2008.
* Copyright (C) Semihalf 2009
+ * Copyright (C) Ilya Yanok, Emcraft Systems 2010
*
* Written by Piotr Ziecik <kosmo at semihalf.com>. Hardware description
* (defines, structures and comments) was taken from MPC5121 DMA driver
@@ -70,6 +71,8 @@
#define MPC_DMA_DMAES_SBE (1 << 1)
#define MPC_DMA_DMAES_DBE (1 << 0)
+#define MPC_DMA_DMAGPOR_SNOOP_ENABLE (1 << 6)
+
#define MPC_DMA_TSIZE_1 0x00
#define MPC_DMA_TSIZE_2 0x01
#define MPC_DMA_TSIZE_4 0x02
@@ -104,7 +107,10 @@ struct __attribute__ ((__packed__)) mpc_dma_regs {
/* 0x30 */
u32 dmahrsh; /* DMA hw request status high(ch63~32) */
u32 dmahrsl; /* DMA hardware request status low(ch31~0) */
- u32 dmaihsa; /* DMA interrupt high select AXE(ch63~32) */
+ union {
+ u32 dmaihsa; /* DMA interrupt high select AXE(ch63~32) */
+ u32 dmagpor; /* (General purpose register on MPC8308) */
+ };
u32 dmailsa; /* DMA interrupt low select AXE(ch31~0) */
/* 0x40 ~ 0xff */
u32 reserve0[48]; /* Reserved */
@@ -195,7 +201,9 @@ struct mpc_dma {
struct mpc_dma_regs __iomem *regs;
struct mpc_dma_tcd __iomem *tcd;
int irq;
+ int irq2;
uint error_status;
+ int is_mpc8308;
/* Lock for error_status field in this structure */
spinlock_t error_status_lock;
@@ -307,8 +315,10 @@ static irqreturn_t mpc_dma_irq(int irq, void *data)
spin_unlock(&mdma->error_status_lock);
/* Handle interrupt on each channel */
- mpc_dma_irq_process(mdma, in_be32(&mdma->regs->dmainth),
+ if (mdma->dma.chancnt > 32) {
+ mpc_dma_irq_process(mdma, in_be32(&mdma->regs->dmainth),
in_be32(&mdma->regs->dmaerrh), 32);
+ }
mpc_dma_irq_process(mdma, in_be32(&mdma->regs->dmaintl),
in_be32(&mdma->regs->dmaerrl), 0);
@@ -562,6 +572,7 @@ static struct dma_async_tx_descriptor *
mpc_dma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
size_t len, unsigned long flags)
{
+ struct mpc_dma *mdma = dma_chan_to_mpc_dma(chan);
struct mpc_dma_chan *mchan = dma_chan_to_mpc_dma_chan(chan);
struct mpc_dma_desc *mdesc = NULL;
struct mpc_dma_tcd *tcd;
@@ -590,7 +601,8 @@ mpc_dma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
tcd->dsize = MPC_DMA_TSIZE_32;
tcd->soff = 32;
tcd->doff = 32;
- } else if (IS_ALIGNED(src | dst | len, 16)) {
+ } else if (!mdma->is_mpc8308 && IS_ALIGNED(src | dst | len, 16)) {
+ /* MPC8308 doesn't support 16 byte transfers */
tcd->ssize = MPC_DMA_TSIZE_16;
tcd->dsize = MPC_DMA_TSIZE_16;
tcd->soff = 16;
@@ -650,6 +662,15 @@ static int __devinit mpc_dma_probe(struct platform_device *op,
return -EINVAL;
}
+ if (of_device_is_compatible(dn, "fsl,mpc8308-dma")) {
+ mdma->is_mpc8308 = 1;
+ mdma->irq2 = irq_of_parse_and_map(dn, 1);
+ if (mdma->irq2 == NO_IRQ) {
+ dev_err(dev, "Error mapping IRQ!\n");
+ return -EINVAL;
+ }
+ }
+
retval = of_address_to_resource(dn, 0, &res);
if (retval) {
dev_err(dev, "Error parsing memory region!\n");
@@ -680,11 +701,23 @@ static int __devinit mpc_dma_probe(struct platform_device *op,
return -EINVAL;
}
+ if (mdma->is_mpc8308) {
+ retval = devm_request_irq(dev, mdma->irq2, &mpc_dma_irq, 0,
+ DRV_NAME, mdma);
+ if (retval) {
+ dev_err(dev, "Error requesting IRQ2!\n");
+ return -EINVAL;
+ }
+ }
+
spin_lock_init(&mdma->error_status_lock);
dma = &mdma->dma;
dma->dev = dev;
- dma->chancnt = MPC_DMA_CHANNELS;
+ if (!mdma->is_mpc8308)
+ dma->chancnt = MPC_DMA_CHANNELS;
+ else
+ dma->chancnt = 16; /* MPC8308 DMA has only 16 channels */
dma->device_alloc_chan_resources = mpc_dma_alloc_chan_resources;
dma->device_free_chan_resources = mpc_dma_free_chan_resources;
dma->device_issue_pending = mpc_dma_issue_pending;
@@ -720,26 +753,40 @@ static int __devinit mpc_dma_probe(struct platform_device *op,
* - Round-robin group arbitration,
* - Round-robin channel arbitration.
*/
- out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_EDCG |
- MPC_DMA_DMACR_ERGA | MPC_DMA_DMACR_ERCA);
-
- /* Disable hardware DMA requests */
- out_be32(&mdma->regs->dmaerqh, 0);
- out_be32(&mdma->regs->dmaerql, 0);
-
- /* Disable error interrupts */
- out_be32(&mdma->regs->dmaeeih, 0);
- out_be32(&mdma->regs->dmaeeil, 0);
-
- /* Clear interrupts status */
- out_be32(&mdma->regs->dmainth, 0xFFFFFFFF);
- out_be32(&mdma->regs->dmaintl, 0xFFFFFFFF);
- out_be32(&mdma->regs->dmaerrh, 0xFFFFFFFF);
- out_be32(&mdma->regs->dmaerrl, 0xFFFFFFFF);
-
- /* Route interrupts to IPIC */
- out_be32(&mdma->regs->dmaihsa, 0);
- out_be32(&mdma->regs->dmailsa, 0);
+ if (!mdma->is_mpc8308) {
+ out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_EDCG |
+ MPC_DMA_DMACR_ERGA | MPC_DMA_DMACR_ERCA);
+
+ /* Disable hardware DMA requests */
+ out_be32(&mdma->regs->dmaerqh, 0);
+ out_be32(&mdma->regs->dmaerql, 0);
+
+ /* Disable error interrupts */
+ out_be32(&mdma->regs->dmaeeih, 0);
+ out_be32(&mdma->regs->dmaeeil, 0);
+
+ /* Clear interrupts status */
+ out_be32(&mdma->regs->dmainth, 0xFFFFFFFF);
+ out_be32(&mdma->regs->dmaintl, 0xFFFFFFFF);
+ out_be32(&mdma->regs->dmaerrh, 0xFFFFFFFF);
+ out_be32(&mdma->regs->dmaerrl, 0xFFFFFFFF);
+
+ /* Route interrupts to IPIC */
+ out_be32(&mdma->regs->dmaihsa, 0);
+ out_be32(&mdma->regs->dmailsa, 0);
+ } else {
+ /* MPC8308 has 16 channels and lacks some registers */
+ out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA);
+
+ /* enable snooping */
+ out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE);
+ /* Disable error interrupts */
+ out_be32(&mdma->regs->dmaeeil, 0);
+
+ /* Clear interrupts status */
+ out_be32(&mdma->regs->dmaintl, 0xFFFF);
+ out_be32(&mdma->regs->dmaerrl, 0xFFFF);
+ }
/* Register DMA engine */
dev_set_drvdata(dev, mdma);
--
1.7.2.3
More information about the Linuxppc-dev
mailing list