[PATCH] spi_mpc8xxx: fix writing to adress 0

[Grant Likely]

On Thu, Sep 16, 2010 at 09:39:09AM +0200, Joakim Tjernlund wrote:
> > From: christophe leroy <christophe.leroy at c-s.fr>
> > To: David Brownell <dbrownell at users.sourceforge.net>, Grant Likely
> > <grant.likely at secretlab.ca>, spi-devel-general at lists.sourceforge.net, linux-
> > kernel at vger.kernel.org, linuxppc-dev at lists.ozlabs.org
> > Date: 2010/09/16 09:06
> > Subject: [PATCH] spi_mpc8xxx: fix writing to adress 0
> > Sent by: linuxppc-dev-bounces+joakim.tjernlund=transmode.se at lists.ozlabs.org
> >
> > This patch applies to 2.6.34.7 (already included in 2.6.35.4)
> > It fixes an issue when sending only or receiving only (mspi->tx-dma was reset
> > as when no tx_buf is defined, tx_dma is 0)
> >
> > Signed-off-by: christophe leroy <christophe.leroy at c-s.fr>
> 
> Acked-by: Joakim Tjernlund <Joakim.Tjernlund at transmode.se>
> 

You need to send this to the linux-stable list and include the sha1
commit id that fixes it in mainline.

Acked-by: Grant Likely <grant.likely at secretlab.ca>

g.