[PATCH v2 03/10] RapidIO: Use stored ingress port number instead of register read
Alexandre Bounine
alexandre.bounine at idt.com
Wed Sep 15 00:59:16 EST 2010
A switch port information is obtained and stored during RIO device setup.
Therefore repeated reads from Switch Port Information CAR may be removed.
Signed-off-by: Alexandre Bounine <alexandre.bounine at idt.com>
Cc: Thomas Moll <thomas.moll at sysgo.com>
Cc: Matt Porter <mporter at kernel.crashing.org>
Cc: Li Yang <leoli at freescale.com>
Cc: Kumar Gala <galak at kernel.crashing.org>
Cc: Micha Nelissen <micha at neli.hopto.org>
---
drivers/rapidio/rio-scan.c | 36 +++++++++---------------------------
include/linux/rio.h | 4 +++-
include/linux/rio_regs.h | 2 ++
3 files changed, 14 insertions(+), 28 deletions(-)
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 1123be8..d09c359 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -420,6 +420,11 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
hopcount, RIO_EFB_ERR_MGMNT);
}
+ if (rdev->pef & (RIO_PEF_SWITCH | RIO_PEF_MULTIPORT)) {
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_SWP_INFO_CAR, &rdev->swpinfo);
+ }
+
rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
&rdev->src_ops);
rio_mport_read_config_32(port, destid, hopcount, RIO_DST_OPS_CAR,
@@ -439,8 +444,6 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
/* If a PE has both switch and other functions, show it as a switch */
if (rio_is_switch(rdev)) {
- rio_mport_read_config_32(port, destid, hopcount,
- RIO_SWP_INFO_CAR, &rdev->swpinfo);
rswitch = kzalloc(sizeof(struct rio_switch), GFP_KERNEL);
if (!rswitch)
goto cleanup;
@@ -458,6 +461,7 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
rdid++)
rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
rdev->rswitch = rswitch;
+ rswitch->rdev = rdev;
dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
rdev->rswitch->switchid);
rio_switch_init(rdev, do_enum);
@@ -719,25 +723,6 @@ static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
}
/**
- * rio_get_swpinfo_inport- Gets the ingress port number
- * @mport: Master port to send transaction
- * @destid: Destination ID associated with the switch
- * @hopcount: Number of hops to the device
- *
- * Returns port number being used to access the switch device.
- */
-static u8
-rio_get_swpinfo_inport(struct rio_mport *mport, u16 destid, u8 hopcount)
-{
- u32 result;
-
- rio_mport_read_config_32(mport, destid, hopcount, RIO_SWP_INFO_CAR,
- &result);
-
- return (u8) (result & 0xff);
-}
-
-/**
* rio_get_swpinfo_tports- Gets total number of ports on the switch
* @mport: Master port to send transaction
* @destid: Destination ID associated with the switch
@@ -834,8 +819,7 @@ static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
if (rio_is_switch(rdev)) {
next_switchid++;
- sw_inport = rio_get_swpinfo_inport(port,
- RIO_ANY_DESTID(port->sys_size), hopcount);
+ sw_inport = RIO_GET_PORT_NUM(rdev->swpinfo);
rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
port->host_deviceid, sw_inport, 0);
rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
@@ -989,8 +973,7 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
"RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
rio_name(rdev), rdev->vid, rdev->did, num_ports);
for (port_num = 0; port_num < num_ports; port_num++) {
- if (rio_get_swpinfo_inport(port, destid, hopcount) ==
- port_num)
+ if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num)
continue;
if (rio_sport_is_active
@@ -1109,8 +1092,7 @@ static void rio_update_route_tables(struct rio_mport *port)
if (rswitch->destid == destid)
continue;
- sport = rio_get_swpinfo_inport(port,
- rswitch->destid, rswitch->hopcount);
+ sport = RIO_GET_PORT_NUM(rswitch->rdev->swpinfo);
if (rswitch->add_entry) {
rio_route_add_entry(port, rswitch,
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 84c9f8c..ffdfe5a 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -112,7 +112,7 @@ struct rio_dev {
u16 asm_rev;
u16 efptr;
u32 pef;
- u32 swpinfo; /* Only used for switches */
+ u32 swpinfo;
u32 src_ops;
u32 dst_ops;
u32 comp_tag;
@@ -219,6 +219,7 @@ struct rio_net {
/**
* struct rio_switch - RIO switch info
* @node: Node in global list of switches
+ * @rdev: Associated RIO device structure
* @switchid: Switch ID that is unique across a network
* @hopcount: Hopcount to this switch
* @destid: Associated destid in the path
@@ -234,6 +235,7 @@ struct rio_net {
*/
struct rio_switch {
struct list_head node;
+ struct rio_dev *rdev;
u16 switchid;
u16 hopcount;
u16 destid;
diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h
index aedee04..be80b1b 100644
--- a/include/linux/rio_regs.h
+++ b/include/linux/rio_regs.h
@@ -33,6 +33,7 @@
#define RIO_PEF_MEMORY 0x40000000 /* [I] MMIO */
#define RIO_PEF_PROCESSOR 0x20000000 /* [I] Processor */
#define RIO_PEF_SWITCH 0x10000000 /* [I] Switch */
+#define RIO_PEF_MULTIPORT 0x08000000 /* [VI, 2.1] Multiport */
#define RIO_PEF_INB_MBOX 0x00f00000 /* [II] Mailboxes */
#define RIO_PEF_INB_MBOX0 0x00800000 /* [II] Mailbox 0 */
#define RIO_PEF_INB_MBOX1 0x00400000 /* [II] Mailbox 1 */
@@ -51,6 +52,7 @@
#define RIO_SWP_INFO_PORT_TOTAL_MASK 0x0000ff00 /* [I] Total number of ports */
#define RIO_SWP_INFO_PORT_NUM_MASK 0x000000ff /* [I] Maintenance transaction port number */
#define RIO_GET_TOTAL_PORTS(x) ((x & RIO_SWP_INFO_PORT_TOTAL_MASK) >> 8)
+#define RIO_GET_PORT_NUM(x) (x & RIO_SWP_INFO_PORT_NUM_MASK)
#define RIO_SRC_OPS_CAR 0x18 /* [I] Source Operations CAR */
#define RIO_SRC_OPS_READ 0x00008000 /* [I] Read op */
--
1.7.0.5
More information about the Linuxppc-dev
mailing list