Serial RapidIO Maintaintance read causes lock up

[John Traill]

Bastiaan,

On 05/10/10 15:28, Bastiaan Nijkamp wrote:
> Hi John,
> 1. Yes, they are both running the exact same kernel and both are
> configured in the same way. With the exception that one is set as host
> and the other as a agent.
> 2. Accept All is set for both boards.
> 3. As i understand, the agent cannot send anything before it is
> enumerated, so it would be safe to first reset the agent and right after
> that the host. In either case, thats the way i am using. The full kernel
> log until the discovery times out after 30 seconds is shown below:
> Using SBC8548 machine description
<snip>

In which case could you check the lawbar initialisation in u-boot for conflicts. 
Would you post a dump of the lawbar registers from uboot.

The TLB's aren't important in this case as linux will reprogram as required.

Cheers

-- 
John Traill
Systems Engineer
Network and Computing Systems Group

Freescale Semiconductor UK LTD
Colvilles Road
East Kilbride
Glasgow G75 0TG, Scotland

Tel: +44 (0) 1355 355494
Fax: +44 (0) 1355 261790

E-mail: john.traill at freescale.com

Registration Number: SC262720
VAT Number: GB831329053

[ ] General Business Use
[ ] Freescale Internal Use Only
[ ] Freescale Confidential Proprietary