[PATCH][v2] Fixing the garbage collector problem after NAND-flash image record in u-boot

Sergej.Stepanov at ids.de Sergej.Stepanov at ids.de
Wed Nov 24 04:38:36 EST 2010


This patch should fix the following problem:
 1. the  jffs2-image update in the u-boot was ok
 2. first restart and first mount of the NAND-flash-partition was also ok
 3. before the restart of controller there are no any activity on NAND-flash except of the jffs2_gcd_mtdX-process ...
 4. BUT after the second restart the NAND-flash-partition could not be really used after the second mount,
    dmesg filled with messages:
...
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x03ce0000: 0xc0ff instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x03d00000: 0xc0ff instead
....
Just for for info:
the behaviour observed on mpc8313-based board with the large-page NAND.
The only activity on NAND-flash was the garbage collector process, that looks for CLEANMARKER-nodes

As Scott said it was broken by commit 3ab8f2a2e7011c5e83363b42950757e46ef06824

Signed-off-by: Sergej Stepanov <Sergej.Stepanov at ids.de>
Cc: Rolf Riehle <Rolf.Riehle at ids.de>
Cc: Scott Wood <scottwood at freescale.com>
Cc: David Woodhouse <dwmw2 at infradead.org>
--

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index c141b07..7a13d42 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -388,6 +388,8 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		         "page_addr: 0x%x, column: 0x%x.\n",
 		         page_addr, column);
 
+		elbc_fcm_ctrl->column = column;
+		elbc_fcm_ctrl->oob = 0;
 		elbc_fcm_ctrl->use_mdr = 1;
 
 		fcr = (NAND_CMD_STATUS   << FCR_CMD1_SHIFT) |


More information about the Linuxppc-dev mailing list