[PATCH 2/2][v3] rapidio, powerpc/85xx: Error interrupt handler for sRIO.
Shaohui Xie
b21989 at freescale.com
Thu Nov 18 17:57:53 EST 2010
The sRIO controller reports errors to the core with one signal, it uses
register EPWISR to provides the core quick access to where the error occurred.
The EPWISR indicates that there are 4 interrupts sources, port1, port2, message
unit and port write receive, but the sRIO driver does not support port2
for now, still the handler takes care of port2.
Currently the handler only clear error status without any recovery.
Signed-off-by: Shaohui Xie <b21989 at freescale.com>
Cc: Li Yang <leoli at freescale.com>
Cc: Kumar Gala <kumar.gala at freescale.com>
Cc: Roy Zang <tie-fei.zang at freescale.com>
Cc: Alexandre Bounine <alexandre.bounine at idt.com>
---
updated to 37-rc2
arch/powerpc/sysdev/fsl_rio.c | 85 +++++++++++++++++++++++++++++++++++++----
1 files changed, 77 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index ddbcd16..d036df9 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -10,7 +10,7 @@
* - Added Port-Write message handling
* - Added Machine Check exception handling
*
- * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc.
+ * Copyright (C) 2007, 2008, 2010 Freescale Semiconductor, Inc.
* Zhang Wei <wei.zhang at freescale.com>
*
* Copyright 2005 MontaVista Software, Inc.
@@ -47,15 +47,33 @@
#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
#define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq)
+#define IPWSR_CLEAR 0x98
+#define OMSR_CLEAR 0x1cb3
+#define IMSR_CLEAR 0x491
+#define IDSR_CLEAR 0x91
+#define ODSR_CLEAR 0x1c00
+#define LTLEECSR_ENABLE_ALL 0xFFC000FC
+#define ESCSR_CLEAR 0x07120204
+
+#define RIO_PORT1_EDCSR 0x0640
+#define RIO_PORT2_EDCSR 0x0680
+#define RIO_PORT1_IECSR 0x10130
+#define RIO_PORT2_IECSR 0x101B0
+#define RIO_IM0SR 0x13064
+#define RIO_IM1SR 0x13164
+#define RIO_OM0SR 0x13004
+#define RIO_OM1SR 0x13104
+
#define RIO_ATMU_REGS_OFFSET 0x10c00
#define RIO_P_MSG_REGS_OFFSET 0x11000
#define RIO_S_MSG_REGS_OFFSET 0x13000
#define RIO_GCCSR 0x13c
#define RIO_ESCSR 0x158
+#define RIO_PORT2_ESCSR 0x178
#define RIO_CCSR 0x15c
#define RIO_LTLEDCSR 0x0608
-#define RIO_LTLEDCSR_IER 0x80000000
-#define RIO_LTLEDCSR_PRT 0x01000000
+#define RIO_LTLEDCSR_IER 0x80000000
+#define RIO_LTLEDCSR_PRT 0x01000000
#define RIO_LTLEECSR 0x060c
#define RIO_EPWISR 0x10010
#define RIO_ISR_AACR 0x10120
@@ -88,7 +106,10 @@
#define RIO_IPWSR_PWD 0x00000008
#define RIO_IPWSR_PWB 0x00000004
-#define RIO_EPWISR_PINT 0x80000000
+/* EPWISR Error match value */
+#define RIO_EPWISR_PINT1 0x80000000
+#define RIO_EPWISR_PINT2 0x40000000
+#define RIO_EPWISR_MU 0x00000002
#define RIO_EPWISR_PW 0x00000001
#define RIO_MSG_DESC_SIZE 32
@@ -1066,6 +1087,40 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport)
return rc;
}
+static void port_error_handler(struct rio_mport *port, int offset)
+{
+ /*XXX: Error recovery is not implemented, we just clear errors */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
+
+ if (offset == 0) {
+ out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0);
+ out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), 0);
+ out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR);
+ } else {
+ out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0);
+ out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), 0);
+ out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
+ }
+}
+
+static void msg_unit_error_handler(struct rio_mport *port)
+{
+ struct rio_priv *priv = port->priv;
+
+ /*XXX: Error recovery is not implemented, we just clear errors */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
+
+ out_be32((u32 *)(rio_regs_win + RIO_IM0SR), IMSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_IM1SR), IMSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR);
+
+ out_be32(&priv->msg_regs->odsr, ODSR_CLEAR);
+ out_be32(&priv->msg_regs->dsr, IDSR_CLEAR);
+
+ out_be32(&priv->msg_regs->pwsr, IPWSR_CLEAR);
+}
+
/**
* fsl_rio_port_write_handler - MPC85xx port write interrupt handler
* @irq: Linux interrupt number
@@ -1146,10 +1201,22 @@ fsl_rio_port_write_handler(int irq, void *dev_instance)
}
pw_done:
- if (epwisr & RIO_EPWISR_PINT) {
+ if (epwisr & RIO_EPWISR_PINT1) {
+ tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ port_error_handler(port, 0);
+ }
+
+ if (epwisr & RIO_EPWISR_PINT2) {
+ tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ port_error_handler(port, 1);
+ }
+
+ if (epwisr & RIO_EPWISR_MU) {
tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- out_be32(priv->regs_win + RIO_LTLEDCSR, 0);
+ msg_unit_error_handler(port);
}
return IRQ_HANDLED;
@@ -1260,12 +1327,14 @@ static int fsl_rio_port_write_init(struct rio_mport *mport)
/* Hook up port-write handler */
- rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler, 0,
- "port-write", (void *)mport);
+ rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler,
+ IRQF_SHARED, "port-write", (void *)mport);
if (rc < 0) {
pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
goto err_out;
}
+ /* Enable Error Interrupt */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL);
INIT_WORK(&priv->pw_work, fsl_pw_dpc);
spin_lock_init(&priv->pw_fifo_lock);
--
1.6.4
More information about the Linuxppc-dev
mailing list